Products

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE BK 1175 is a blocked isocyanate suitable for the formulation of non-yellowing IK stoving enamels; it can be used in traditional stoving enamels to flexibilize and to increase adhesion.

POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,

Saturated polyester resin with high wettability and flexibility. Suitable for high filled two-pack coatings and adhesives formulations.

POLURENE IR 51 AB is recommended for the formulation of PU sealers and matt topcoat.

POLURENE OK. D. AE is recommended for the formulation of overprinting coatings for paper and polishable varnishes and enamels with good color retention for wood, metal, plastic.

POLURGREEN PRP 450 Olis a polyether based prepolymer with high elongation andgood modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 450 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

POLURGREEN PRP 750 01 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 750 01 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

REXIN DP 328 is recommended for the formulation of 2K polyurethane sealers and high gloss topcoats, clear and pigmented. REXIN DP 328 is a saturated polyester resin studied for P.U two components.REXIN DP 328 is a flexible resin and, used alone or in combination with REXIN HS 129 or other REXIN, it is possible to formulate sealers and matt finishes. These paints have excellent substrate wetting, good solvent release, fast curing and resistance to overcoating.

HYDRORENE AW 4 01 is a low Monomer Content solvent-free product.

POLURGREEN MT100 LLV-is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

BLUEPUR 3038 is a aliphatic-aromatic isocyanurate.

UCOPOL M 4054 is an urethane prepolymer recommended for the maintenance of wood, for anti-skid floors, gymnasiums and for highly abrasion resistant coatings.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

BLUEPUR 2937 is an aliphatic coalescent free polyurethane dispersion formulated forparquet coatings. The special chemical structure of BLUEPUR 2937 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems.

POLURENE LP 100 LV, with very low viscosity, is excellent for improving the flexibility of epoxy systems and for adhesives and sheaths. It is recommended for adhesion of wood with building materials (concrete, ceramic, stoneware, marble).

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

POLURENE PTSI reacts with water and with OH-groups generating an inert amide and carbon dioxide. Eliminates slight parts of humidity and prevents moisture-related problems in the formulation of polyurethane coatings.12g of POLURENE PTSI are needed to trap Ig of water. Moisture scavenger.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

POLURENE IR 51 BA is recommended for the formulation of hardener for 2K PU sealers and matt topcoat. POLURENE IR 51 BA is used to formulate fast curing hardener. POLURENE IR 51 BA can be used in combination with POLURENE AD, for the formulation of sealers and matt topcoat, clear or pigmented, when fast curing and high scratch resistance are required.

POLURENE IR 51 EA is recommended for the formulation of hardener for 2K PU system.

POLURENE LP100NPF is a yellow liquid. Compliance with EC and REACH.

POLURGREEN FP 75 01 is Low monomer version of POLURENE FP 75K. Polyurethane adduct version in accordance with EU, BFR and FDA regulations for food packaging.

UCOPOL M 541 is used for the formulation of one component and two component sealants and industrial adhesives. UCOPOL M 541 is recommended for the formulation of both sealants and coatings for concrete substrates.It can be mixed with UCOPOL M 551 in order to provide tough flexible sprayable films.

POLURENE 60T is recommended for the formulation of pigmented and clear sealers, matt and gloss topcoats. POLURENE 60T is a very versatile polyisocyanate used for the formulation of polyurethane sealers and topcoats, also in combination with rigid resins.

POLURGREEN PRP 5500 01 have adhesives and sealants applications. POLURGREEN PRP 5500 Olis a branched polyether based prepolymer with low elongation and high modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 5500 Olis mainly used in the formulation of IK polyurethane adhesives and sealant with very low monomer content.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

1K Primer for concrete solventless and odorless. Ready to use product with good wettability and penetration into the substrate. Shorter crosslinking time than UCOPOL M 602

POLURENE LPI 34 NT is an adhesive for wood D4 approved. It is recommended for lamellars, bonding of outdoor furniture, bonding wood subject to high moisture (water, bad weather conditions) and bonding wood used for the production of door and windows.

POLURCAST PE90A is a aromatic prepolymer.

POLURENE S51 is a moisture cure product.