Products

Crestapol® 1260 Urethane Acrylate Resin is a low-viscosity urethane acrylate type resin. It is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature. This product can be infused at vacuum levels down to -1.0 bar. It produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Texicryl® 13-400 is a formaldehyde free, cationic emulsion binder, specially designed for textile applications. It has been specially designed for textile applications using processes like pigment dyeing, mordant and printing. The product benefits are high crock-fastness, washing performance, excellent color yield and soft handle.

Texipol 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It shows good all round performance with universal pigment and binder compatibility. It is supplied as a pre-neutralized dispersion as the ammonium salt of an acrylic copolymer.

Crestamould® B12R Sealer is a MEKP catalysed, brushable, slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. It acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work.

Crystic® Polyester Resin 1160PA is a general-purpose, thixotropic, pre-accelerated, very low styrene emission, orthophthalic polyester resin with low viscosity. It has a 25-minute gel time and is suitable for parts used in building and construction, transportation, and industrial applications. This product is a part of Scott Bader's Crystic® Green system.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Vinyl Ester Resin VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester laminating and tooling resin with excellent surface finish for marine skin coat as well as for tooling applications. It has a gel time of 23 minutes.

Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1214 Urethane Acrylate Resin is a tough, low-shrink, high-quality, surface-finish urethane acrylate resin for pultrusion. When filled with ATH, it has very high fire, smoke, and toxic fume performances, along with an excellent surface finish. It lacks cracking in the central sections.

Crestamould® T28 is an extrudable modified polyester compound designed for milling of small and large plugs or direct limited production molds with Computer Numerical Control (CNC) multiple axis machines. It can be extruded with conventional FRP putty dispensing equipment. The product provides a homogeneous substrate that prevents print from the underlying structure and gives sufficient flexibility to prevent cracks.

Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crestamould® Gelcoat 15PA (B) is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and has been developed to have excellent gloss retention alongside impact, heat and chemical resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. Crestamould® Gelcoat 15PA (B) is recommended for use in the manufacture of high quality FRP composite tooling.

Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.

Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.

Crystic® Glosscoat is a polyester coating designed to be applied over prepared crystic primecoat to give a glossier and more durable surface. The material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss. It is designed for spray application using gravity fed, siphon or pressure pot systems.

Crystic® Polyester Resin 2.446PA is a pre-accelerated, thixotropic, spray viscosity, orthophthalic polyester resin with low styrene emission. This laminating resin's rapid wet-out, low exotherm, and fast hardening characteristics make it ideal for rapid mold turnaround. It has a 26-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications. A low-viscosity version of this product is also available.

Crystic® Fire Retardant Resin 1355PA is a pre-accelerated, filled, fire-retardant polyester resin that has been designed for contact molding applications. It has been formulated as an inexpensive resin and wets out the reinforcement rapidly. This product is supplied in a restricted range of colors.

Crystic® Polyester Resin 701PAX is a pre-accelerated isophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Vinyl Ester Resin VE671-03 is a bisphenol A epoxy based, vinyl ester resin. It designed for use in closed mold applications and centrifugal casting processes. It is recommended for the manufacture of fiber reinforced composite tanks, vessels, ducts etc. for use in chemical processing applications.

Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces. 

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.

Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.

Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.

Crestamould® T29 Extrudable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and it can be extruded up to a thickness of approx. 15mm (0.6”). It provides a homogenous substrate that prevents print from the underlying structure.

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

espol™ 30.00 is a non-accelerated isophthalic polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crestamould® T27 Polyester Compound is designed for milling of large plugs (10-25 m, 30-75 ft, ) or direct limited production moulds with Computer Numerical Control (CNC) multiple axis machines. It provides a homogeneous substrate that prevents print from the underlying structure, and gives sufficient flexibility to prevent cracks.

Crystic® Gelcoat 15E(B) is a superior-performance, unaccelerated vinyl ester spray or brush-tool gel coat. It is used for making molds that are designed to have a long service life and retain high gloss levels after multiple pulls. This product is easy to spray or brush and achieves good coverage. The gelcoat does not gas, resulting in a very low porosity surface. It cures with a standard MEKP catalyst and has excellent resistance to fiber print-through when used with Crestamould® VE679PA skincoat, Crestamould® RTR4010PA, or Crestamould® 474PA.

Crestamould® RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity, improved shrinkage control and is catalysed with standard MEKP catalyst. It is a thixotropic, filled, low profile resin which helps to achieve faster mold making and eliminates surface distortion. This product was formulated for hand-lay mold making applications.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.