company tower banner

Products

Unitika

Devices & AssembliesApplications

Consumer Electronics

Consumer Electronics

Other Devices & Assemblies

Other Devices & Assemblies

15 Products found on Unitika in Devices & Assemblies

TDSWith TDS

Nylon 6 A1030BRL banner

Nylon 6 A1030BRL

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A1030BRL is a standard Nylon 6 grade with medium viscosity. It is used for injection molding applications.

Nylon 6 A1022GFL60(A) banner

Nylon 6 A1022GFL60(A)

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Nylon 6 A1022GFL60(A) is a glass fiber-reinforced grade with low viscosity. It is used for injection molding applications.

Nylon 6 A1030FR banner

Nylon 6 A1030FR

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A1030FR is a High cycle grade with medium to high viscosity. It is used for injection molding applications.

Nylon 6 A3130HR-25 banner

Nylon 6 A3130HR-25

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A3130HR-25 is a Inorganic-fillered grade with low viscosity. It is used for injection molding applications.

Nylon 6 A1030TF banner

Nylon 6 A1030TF

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Additives Included:Lubricant (PTFE)

Nylon 6 A1030TF is a Lubricant grade with medium viscosity. It is used for injection molding applications.

Nylon 6 A1025GO banner

Nylon 6 A1025GO

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Nylon 6 A1025GO is a flame-resistant grade with low viscosity. It is used for injection molding applications.

Nylon 6 A3130 banner

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A3130 is a Inorganic-fillered grade with medium viscosity. It is used for injection molding applications.

Nylon 6 A1030JR banner

Nylon 6 A1030JR

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A1030JR is a high cycle grade with low viscosity. It is used for injection molding applications.

Nylon 6 A1025NO banner

Nylon 6 A1025NO

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A1025NO is a flame-resistant grade with low viscosity. It is used for injection molding applications.

Nylon 6 A1030GFL banner

Nylon 6 A1030GFL

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Nylon 6 A1030GFL is a glass fiber-reinforced grade with medium viscosity. It is used for injection molding applications.

Nylon 6 RUN35-C25 banner

Nylon 6 RUN35-C25

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Extrusion, Blow Molding

Nylon 6 RUN35-C25 is a warping-resistant, high-rigidity grade with low viscosity. It is used for injection molding applications.

Nylon 6 A1030GFL45 banner

Nylon 6 A1030GFL45

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Nylon 6 A1030GFL45 is a glass fiber-reinforced grade with medium viscosity. It is used for injection molding applications.

Nylon 6 A1030SR banner

Nylon 6 A1030SR

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding

Nylon 6 A1030SR is a high cycle grade with medium viscosity. It is used for injection molding applications.

Nylon 6 A1022GFL15 banner

Nylon 6 A1022GFL15

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

Nylon 6 A1022GFL15 is a glass fiber-reinforced grade with low viscosity. It is used for injection molding applications.

Nylon 6 A3030N-2 banner

Nylon 6 A3030N-2

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding, Extrusion

Nylon 6 A3030N-2 is a Inorganic-fillered grade with medium viscosity. It is used for injection molding applications.