Products

WACKER® L 053 is a polyether-functional polydimethylsiloxane that is completely water-soluble. WACKER® L 053 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 053 exhibits both special lubricant properties and antistatic action.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

WETSOFT® NE 430 is a nonionic macroemulsion concentrate of a self-dispersing hydrophilic silicone fluid. It is used for the hydrophilic treatment of fibers and textiles of all kinds. On hydrophilic substrates such as cellulosics, the hydrophilic properties are usually not affected, while hydrophobic substrates such as polyesters typically experience a clear improvement in wetting properties.

SIPELL® CE 27 is a flowable, water-based dispersion of precured silicone rubber. It is primarily used as an additive to impart a pleasant, greasy hand feel. In addition, SIPELL® CE 27 is utilized to enhance the abrasion resistance of finished leather goods.

WACKER® Finish CT 208 E is a nonionic macroemulsion of a reactive polysiloxane. This one-component finish has self-crosslinking properties, resulting in the formation of insoluble silicones that provide textile fabrics with flexible and shape-stabilizing characteristics. These effects remain unaffected even after domestic laundering and dry cleaning processes.

WETSOFT® NE 810 is a self-dispersible polyether-amino-functional silicone fluid. Formulations with WETSOFT® NE 810 are used for padding in the exhaust process and can also be used on their own or in combination with organic fabric softeners, polyethylene waxes, and other finishing agents. Compatibility should be tested on a case-by-case basis.

WACKER® Finish WR 301 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that provides a soft, drapable, and elastic touch to woven and knitted fabrics. It enhances wash-and-wear properties, crease recovery angle, sewability, tear strength, and reduces abrasion loss. These effects are quickly noticeable after washing and dry cleaning.

WETSOFT® NE 580 is a predominantly nonionic microemulsion concentrate of a hydrophilic silicone fluid. It is used for the hydrophilic treatment of fibers and textiles of all kinds. On hydrophilic substrates such as cellulosics, the hydrophilic properties are usually not affected, while hydrophobic substrates such as polyesters typically experience a clear improvement in wetting properties. WETSOFT® NE 580 provides woven goods and knitwear with a silky soft, supple, and smooth hand.

WACKER® Finish WR 1300 is a reactive aminoethyl-aminopropyl functional polydimethylsiloxane. When used in a softener formulation, it has minimal impact on the degree of whiteness. Additionally, it does not adversely affect the shade or color-fastness properties of colored goods. In formulations for fill fiber finish applications, WACKER® Finish WR 1300 provides excellent slickness and resilience to the fibers.

WACKER® IM 11 is a polydimethylsiloxane having carbinol functional groups in α,ω-position. WACKER® IM 11 can be used neat, in a solution, or as an emulsion. Suitable solvents for WACKER® IM 11 are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols, and ketones.

JETSOFT® Concentrate is a self-dispersing aminofunctional silicone fluid that can be diluted with water. It is specifically designed to be used as an active substance in softener formulations for the impregnation of fibers and textiles. By using JETSOFT® Concentrate, woven and knitted fabrics gain a characteristic, soft, and natural hand with low surface smoothness.

POWERSOFT® AE 66 is a concentrated nonionic macro-emulsion containing an aminomodified silicone fluid. It is specifically designed for impregnating fibers and textiles. When applied, POWERSOFT® AE 66 provides a soft, smooth, and elastic touch to woven and knitted fabrics. Additionally, it enhances wash-and-wear properties, crease recovery angle, tear strength, and reduces abrasion loss. These effects are retained even after washing and dry cleaning processes.

WETSOFT® AE 200 is a modified aminofunctional polydimethylsiloxane used for non-yellowing, hydrophilic textile finishing. It is an excellent active ingredient in hydrophilic softeners for finishing all kinds of fibers and textiles. WETSOFT® AE 200 provides woven and knitwear, particularly nonwovens and terry, with a soft and supple hand.

SIPELL® VF 35 is a predominantly non-ionic, semi-micro dispersion of a special silicone copolymer. It is a water-based and solvent-free (VOC-free) product that serves as an additive in the finishing process of leather. When applied, SIPELL® VF 35 imparts unique properties to automotive, furniture, and garment leather goods, including improved soil release and solvent resistance.

WACKER® Finish WR 1200 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that imparts a very soft, drapable, and elastic touch to woven and knitted fabrics. It is widely regarded as the best softening agent for PES and other synthetic fibers. In addition to softness, WACKER® Finish WR 1200 also enhances the wash-and-wear properties, crease recovery angle, sewability, tear strength, and abrasion loss of the treated fabrics. These effects are quickly noticeable, even after washing and dry cleaning processes.

SIPELL® AE 34 is a non-ionic microemulsion of an amino-functional silicone fluid. It is primarily used as a hand-modifying additive to provide a pleasant, soft-soap hand feel. SIPELL® AE 34 finds its main application in the treatment of leather for cloth and furniture, where it helps enhance the tactile properties and softness of the treated material.

POWERSOFT® UP 68 is a nonionic macro-emulsion concentrate of a reactively modified aminofunctional polydimethylsiloxane. It is designed for non-yellowing and medium hydrophilic textile finishing applications. POWERSOFT® UP 68 is especially suitable for softener formulations used in the impregnation of fibers and textiles. It provides a soft, drapable, and elastic touch to woven and knitted fabrics.

WACKER® Finish WR 210 is a reactively modified aminofunctional polydimethylsiloxane for use in non-yellowing and moisture-neutral textile finishing. WACKER® Finish WR 210 is particularly suitable as an active substance in softener formulations for the impregnation of fibers and textiles. WACKER® Finish WR 210 imparts a soft, drapable, and elastic touch to woven and knitted fabrics.

VINNAPAS® C 305 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. VINNAPAS® C 305 is a physically drying thermoplastic binder that forms films through solvent evaporation. When appropriate solvents are used, the dry films are odorless.

WACKER® Finish WR 1100 LV is a reactive aminoethyl-aminopropylfunctional polydimethylsiloxane with a reduced level of cyclic siloxanes. It is specifically recommended as an active substance in softener formulations for impregnating fibers and textiles, providing a very soft, drapable, and elastic touch to woven and knitted fabrics.

WACKER® Finish WR 1300 LV is a reactive aminoethyl-aminopropyl functional polydimethylsiloxane with a reduced level of cyclic siloxanes. It is specifically designed as an active substance in softener formulations for the impregnation of fibers and textiles. WACKER® Finish WR 1300 LV is highly regarded as the top softening agent for cotton fabrics and knitwear made of cotton or cotton/PES blends.

POWERSOFT® AE 61 is a concentrated emulsion used for preparing silicone macro-emulsions. It consists of a reactive amino-modified silicone fluid and a base compound. Silicone macro-emulsions formulated with POWERSOFT® AE 61 are ideal for impregnating various types of fibers and textiles. These emulsions enhance the softness, drape, and elasticity of fiber materials, including cotton (CO), polyester (PES), viscose (CV), and their blends.

ADVALON® CI 40 is a nonionic semi-microemulsion of a reactive polysiloxane. It is specifically formulated as a fabric softener for polyester materials, providing a soft and pleasant feel. Additionally, it enhances the intensity of dark color shades in the fabric.

POWERSOFT® PE 280 is a composition that includes a self-dispersing aminofunctional silicone fluid. It is a cationic silicone softener specifically developed for exhaust applications and can be used on common fibers such as cotton, polyester, polyamides, and their blends. What sets POWERSOFT® PE 280 apart from regular silicone-based softeners is its exceptional stability in the presence of alkali, salt, and high-shearing conditions.

WETSOFT® CTA is a self-dispersible aminofunctional silicone fluid with polyether groups. It can be applied alone in diluted form or blended with organic softeners to impart hydrophilic properties to fibers and textiles. However, a compatibility test is recommended before mixing with organic softeners.

WACKER® Finish CT 96 E is a nonionic micro-emulsion of a reactive, aminofunctional silicone fluid. It is specifically recommended as a softener for impregnating fibers and textiles, providing a very soft, smooth, and elastic touch to woven and knitted fabrics.

ADVALON® CF 3295 is a macroemulsion finish for "PAN" carbon fiber precursors with approximately 20% solids content. It is formulated using proprietary silicone technology. The purpose of ADVALON® CF 3295 is to provide excellent wetting and penetration, ensuring uniform lubrication between fibers and metal during fiber processing. It also prevents the fusion of fibers. Additionally, the active substance in ADVALON® CF 3295 acts as an antistatic agent due to its inherent conductivity.

SIPELL® RE 63 F is a pendant epoxy-functional polydimethylsiloxane. It is used as a key ingredient in the formulation of water-based repellents, particularly for wet-end applications on leather. The epoxy functionality of SIPELL® RE 63 F allows it to react with nucleophilic groups present in the protein matrix of the leather, enhancing its water repellency properties.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

SIPELL® RE 55 M is a highly efficient silicone-based water repellent for leather that includes an incorporated catalyst. The product can be diluted with aprotic organic solvents such as ketones and hydrocarbons. It is well-suited for the post-treatment of leather goods, safety clothing, and sports shoes, providing effective water repellency.

SIPELL® AE 45 is a nonionic macroemulsion of an amino-functional silicone fluid. It is primarily used as a hand-modifying additive to provide a pleasant, soft-soap hand feel. SIPELL® AE 45 finds its main application in the treatment of leather for cloth and furniture, where it helps enhance the tactile properties and softness of the treated material.

SIPELL® AP 304 is a special, nonionic, finely dispersed emulsion based on a high-molecular-weight film-forming silicone polymer obtained through innovative processing. This emulsion can be easily diluted and exhibits good compatibility with polyurethane, acrylate, and water-based NC polymer systems in topcoat formulations. The water-based and solvent-free (low VOC) additive SIPELL® AP 304 is particularly useful for enhancing the abrasion resistance of finished leather goods.