Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde Software Solutions
Formulations
Food & Nutrition
Food & Nutrition Formulations
View All
Cosmetics & Personal Care
Industries
Agriculture & Feed
Agriculture & Feed
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Agrochemicals
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde Software Solutions
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
Matching Products
Categories
(9)
Show All 9 Categories
CASE Ingredients
Industrial Additives & Materials
Ready-to-Use Products
Cleaning Ingredients
Composite Materials
Fluids & Lubricants
Agrochemicals
Elastomers
Plastics
CASE Ingredients
Industrial Additives & Materials
Ready-to-Use Products
Cleaning Ingredients
Composite Materials
Fluids & Lubricants
Agrochemicals
Elastomers
Plastics
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
312 Products
found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
VINNAPAS® EZ 222
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Glass Transition Temperature (Tg):
18.0 - 18.0 °C
Features:
Excellent Flow, Good Leveling, Higher Filler Content, Low Viscosity, Abrasion Resistance
VINNAPAS® EZ 222 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with hydroxyethyl cellulose and surfactant. It has a glass transition temperature (Tg) of +18.0°C. This dispersion offers excellent scrub resistance, good flow and leveling properties, and low viscosity. It has a high solid content and is produced without the use of APEOs.
WACKER® Finish CT 51 L
Functions:
Binder & Resin, Binder
Chemical Family:
Silicones
Compatible Substrates & Surfaces:
Textiles
Features:
Weather Resistance, Multi-Substrate Adhesion, Abrasion Resistance, Excellent Scratch Resistance, Improved Flexibility, Water Resistance
WACKER® Finish CT 51 L is a solvent-based silicone rubber solution specifically designed for fine coatings on textile substrates. It enables the application of fine coatings with a weight as low as < 5 g/m². This product offers high water columns and low air permeability, resulting in excellent performance. Additionally, it exhibits exceptional layer-to-layer adhesion when multiple coating layers are applied.
DEHESIVE® EM 427
Chemical Family:
Vinyl Polymers
End Uses:
3K (3 component) Coating, Pressure Sensitive Adhesive
Compatible Substrates & Surfaces:
Paper
Features:
Food Contact Acceptable
DEHESIVE® EM 427 is the base polymer in a three-component aqueous emulsion system. It is combined with WACKER® CROSSLINKER V 15 and WACKER® CATALYST EM 459. This product is specifically developed for pressure-sensitive adhesive release applications and can be utilized on papers with different levels of porosity as well as films. Cure is achieved through a vinyl addition chemistry mechanism.
VINNAPAS® 315
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Extrusion Coating
Compatible Substrates & Surfaces:
Paper
Glass Transition Temperature (Tg):
17.0 - 17.0 °C
Features:
High Tensile Strength, Heat Resistance, Rapid Thickening, Fast Setting, Excellent Adhesion, Low Migration, Tack-free, Easy Cleaning, Improved Flexibility, Water Resistance, Good Mechanical Properties
VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.
VINNAPAS® 561 ED
Functions:
Binder & Resin
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Physical Form:
Dispersion
Features:
Improved Flexural Strength, Good Compatibility, Improved Flexibility, Higher Filler Content, Water Resistance, Low Glass Transition Temperature, Good Elongation
VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).
VINNAPAS® EN 1024
Functions:
Binder & Resin, Binder, Crosslinking Agent
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Acetates
Compatible Substrates & Surfaces:
Paper
Features:
Self Crosslinking, Self-crosslinking, Good Wetting Properties
VINNAPAS® EN 1024 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. This product is manufactured without the use of plasticizers. It is specifically designed to serve as a binder for soft and hydrophilic nonwovens. VINNAPAS® EN 1024 offers good wet strength to the nonwovens while maintaining a low level of formaldehyde. Additionally, it is particularly suitable for foam applications.
VINNAPAS® EP 708 (NJG)
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Waterborne Adhesive
Compatible Substrates & Surfaces:
Fibers & Fabrics, Wood, Textiles, Plastics, Paper
Features:
Rapid Thickening, Good Tack, Good Chemical Stability, High Viscosity, Frost Resistance
VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.
DEHESIVE® 921
Chemical Family:
Silicones
End Uses:
Pressure Sensitive Adhesive
Compatible Substrates & Surfaces:
Paper
Features:
Improved Ageing Resistance, Fast Cure, Good Release Properties
DEHESIVE® 921 is a 100% solvent-free, addition-curing silicone specifically designed for coating paper and filmic substrates used in the production of single- and double-sided industrial release laminates. It offers fast curing properties, ensuring efficient processing. Additionally, it exhibits low release characteristics at low peel speeds and features a dynamically increasing release profile. The product also demonstrates good release stability over time, providing reliable and consistent performance.
VINNAPAS® EP 8178
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Solventless & High Solids Coating
Glass Transition Temperature (Tg):
-3.0 - -3.0 °C
Features:
Good Toughness, Good Elongation, High Tensile Strength, Fast Drying, Weather Resistance, Crack Resistance, Low VOC, Improved Flexibility, Higher Filler Content, Water Resistance, Good Mechanical Properties
VINNAPAS® EP 8178 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion. It has a glass transition temperature (Tg) of approximately -3 °C. This dispersion is specifically designed as a high-performance, ultra-high-solids dispersion for weather-resistant air barriers. It offers excellent water resistance, ideal mechanical properties, and the capability to handle high extender loadings.
SILRES® BS 310
Chemical Family:
Siloxanes, Silicones
End Uses:
Primer, Waterborne Coating, Solventless & High Solids Coating
Features:
Improved Workability, Good Leveling, Improved Substrate Wetting
SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.
VINNAPAS® DPN 36T
Functions:
Binder & Resin, Binder
Chemical Family:
Polyvinyl Acetates (PVA)
Compatible Substrates & Surfaces:
Fiberglass, Textiles
Features:
Self Crosslinking, Hydrophilic, Wash-Off Resistance, Solvent Resistance, Blocking Resistance
VINNAPAS® DPN 36T is a self-crosslinking, aqueous dispersion based on the monomer vinyl acetate. It is produced without the use of plasticizers. VINNAPAS® DPN 36T can be used for a hard textile finish to adjust the handle or as a nonblocking component for hard, sealable coatings. VINNAPAS® DPN 36T is especially suitable as a binder for glass fiber fabrics.
VINNAPAS® SAF 608
Chemical Family:
Styrene-Acrylic Copolymer
End Uses:
Primer
Features:
High Capacity of Penetration, Frost Resistance, Improved Flexibility
VINNAPAS® SAF 608 is a water-based dispersion containing a fine-particle-sized copolymer of styrene and acrylic acid ester. It has a solid content of 50%. This product is manufactured without the inclusion of coalescents, organic solvents, plasticizers, or compounds containing alkyl phenol ethoxylate (APEO). It exhibits excellent penetration into porous substrates and offers great flexibility.
VINNAPAS® EN 428
Functions:
Binder & Resin, Binder, Crosslinking Agent
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Acetates
Compatible Substrates & Surfaces:
Paper
Features:
Self Crosslinking, Self-crosslinking
VINNAPAS® EN 428 is a self-crosslinking, plasticizer-free, aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It offers a unique combination of softness, high wet strength, and versatile formulation options. The film formed by VINNAPAS® EN 428 has a soft texture, making it an excellent choice as a binder for personal hygiene nonwovens. Additionally, it can be used as a coating and finishing agent for woven and knitted textiles, providing enhanced properties and performance.
VINNOL® H 15/42
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Thermal Transfer Ink, Lacquers, Heat Sealing Coating
Compatible Substrates & Surfaces:
Masonry, Wood
Glass Transition Temperature (Tg):
70.0 - 70.0 °C
Features:
Grease Resistant, Abrasion Resistance, Alkali Resistance, Oil Resistance, Strippable, Improved Flexibility, Acid Resistance, Good Toughness, Physical Drying
VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.
ELASTOSIL® RD 3151 F
Chemical Family:
Silicones
End Uses:
Primer, Top Coat
Compatible Substrates & Surfaces:
Textiles
Features:
Easy Cleaning, Abrasion Resistance, Heat Resistance
ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.
VINNAPAS® 418
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Compatible Substrates & Surfaces:
Fibers & Fabrics
Glass Transition Temperature (Tg):
-15.0 - -15.0 °C
Features:
Excellent Adhesion, Improved Flexibility
VINNAPAS® 418 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a soft hand is required. The dispersion combines moderately high solid content with a low viscosity, a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents.
VINNAPAS® 510 ED
Functions:
Binder & Resin
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Features:
Improved Flexibility, Good Pigmentability, Improved Flexural Strength, Weather Resistant, Water Resistance
VINNAPAS® 510 ED is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 510 ED offers several advantages in building chemical applications as well as in general adhesives. To achieve optimum weathering resistance, opaque pigments should be used to ensure adequate pigmentation.
WACKER® Silicate TES 40 WN
Functions:
Filler, Binder & Resin
Compatible Substrates & Surfaces:
Metal, Glass, Ceramic
Features:
High Flash Point, Low Viscosity, Heat Resistance
End Uses:
Primer, 1K (1 component) Coating, 2K (2 component) Coating, Sol-Gel Coating
WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.
VINNAPAS® eco CA 5880
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Acetates
Glass Transition Temperature (Tg):
18.0 - 18.0 °C
VINNAPAS® eco CA 5880 is a sustainable solution that promotes the conservation of fossil resources by enabling the substitution of fossil-based raw materials with certified sustainable renewable feedstock. This substitution process adheres to the REDcert² mass balance approach and is independently audited by a third party. The precise amount of fossil raw material replaced varies depending on the specific product version and is documented in the corresponding certificate.
WACKER® 50550/8 VP
Functions:
Binder & Resin, Lubricant, Film Former, Friction Modifier
Chemical Family:
Silicones, Siloxanes
Certifications & Compliance:
REACH (Europe)
WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.
VINNAPAS® eco EN 1020
Functions:
Binder & Resin, Binder
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Acetates
Compatible Substrates & Surfaces:
Paper
Features:
Good Wetting Properties, Self Crosslinking
VINNAPAS® eco is a fossil resource-saving product where a specific share of the fossil-based raw materials required for manufacturing this product can be replaced by certified sustainable renewable feedstock. VINNAPAS® eco EN 1020 is specifically designed as a binder for soft hydrophilic nonwovens. It can be applied through spray, impregnation, or foam methods. VINNAPAS® eco EN 1020 provides excellent wet strength to the nonwoven while maintaining a low level of free formaldehyde content.
DEHESIVE® 920
Chemical Family:
Vinyl Polymers
End Uses:
Pressure Sensitive Adhesive, Release Coating
Compatible Substrates & Surfaces:
Paper
Features:
Good Release Properties, Improved Ageing Resistance, Fast Cure
DEHESIVE® 920 is a solvent-free, addition-curing silicone fluid that forms an integral part of a multicomponent system. When combined with a crosslinker, platinum catalyst, and potentially a CRA® release modifier, it is employed to apply a release coating onto paper and filmic substrates.
DEHESIVE® EM 490
Chemical Family:
Vinyl Polymers
Compatible Substrates & Surfaces:
Paper
Features:
Low Temperature-Curing, Fast Cure, Good Release Properties, Shear Resistance
DEHESIVE® EM 490 is a vinyl polymer emulsion that contains polymer and is employed in conjunction with catalysts and silicone emulsion crosslinkers to impart release properties to various substrates. The primary application of this product is in the production of hygiene papers.
VINNAPAS® B 100/20 VLE
Chemical Family:
Vinyl Acetate-Vinyl Laurate Copolymer, Polyvinyl Acetates (PVA)
End Uses:
Lacquers
Glass Transition Temperature (Tg):
21.0 - 21.0 °C
VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.
VINNAPAS® EN 1092
Functions:
Binder & Resin, Binder
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Compatible Substrates & Surfaces:
Glass, Fiberglass, Textiles
Features:
Self Crosslinking, Improves Wet Strength, Improves Dry Strength, Alkali Resistance
VINNAPAS® EN 1092 is a self-crosslinking, aqueous polymer dispersion specifically developed for the nonwovens and textile coating markets. It is produced without the use of plasticizers and is based on the monomers vinyl acetate and ethylene. VINNAPAS® EN 1092 provides a unique combination of high dry and wet strength, making it an excellent choice for various applications. The dispersion has a low formaldehyde content of less than 100 ppm, ensuring compliance with strict standards. It is particularly recommended as a binder for glassfiber scrims, offering a firm handfeel and excellent alkaline resistance.
VINNAPAS® 323
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Extrusion Coating
Compatible Substrates & Surfaces:
Paper
Glass Transition Temperature (Tg):
23.0 - 23.0 °C
Features:
Fast Setting, Improved Cohesion, Water Resistance, Low Migration, Tack-free
VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.
VINNAPAS® EP 724
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
19.0 - 19.0 °C
Features:
Tack-free, Frost Resistance, High Tensile Strength, Heat Resistance, Excellent Creep Resistance, Improved Cohesion
VINNAPAS® EP 724 is a vinyl acetate-ethylene copolymer dispersion with a glass transition temperature of approximately +19°C, which is the highest among the VINNAPAS® EP product lines. It possesses exceptional cohesive strength (heat resistance) and tensile strength. The dried film formed by VINNAPAS® EP 724 is more flexible than PVAc polymer while maintaining good tensile strength and high creep resistance. Furthermore, the dried film exhibits low levels of tack.
VINNAPAS® EP 1400
End Uses:
Extrusion Coating, Waterborne Sealant
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
0.0 - 0.0 °C
Features:
Fast Setting, Cost Effective, Improves Adhesion, Low Migration, Tack-free, Low Glass Transition Temperature, High Performance, Low Temperature Flexibility, Excellent Plasticizer Response, Water Resistance, Frost Resistance, High Tensile Strength, Heat Resistance
VINNAPAS® EP 1400 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It has a glass transition temperature (Tg) of 0 °C. This high-performance polymer dispersion serves as a cost-competitive alternative for formulating waterborne adhesives, replacing plasticized vinyl-acetate homopolymer packaging adhesives, high wet tack, low solids poly(vinyl alcohol), and dextrin/starch-based adhesives. It is suitable for various adhesive applications, including conventional non-contact extrusion-applied adhesive systems.
VINNAPAS® 400 H
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Extrusion Coating
Glass Transition Temperature (Tg):
0.0 - 0.0 °C
Features:
High Viscosity, High Tensile Strength, Heat Resistance, Rapid Thickening, Fast Setting, Improved Cohesion, Cost Effective, Low Migration, Tack-free, High Performance, Improved Flexibility, Water Resistance
VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.
DEHESIVE® 929
Functions:
Binder & Resin
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Compatible Substrates & Surfaces:
Paper, Film
Features:
Fast Cure, Good Release Properties, Excellent Flow
DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.
VINNAPAS® EP 709
Functions:
Filler, Binder & Resin
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
Compatible Substrates & Surfaces:
Wood, Plastics
Physical Form:
Dispersion
Features:
Improved Cohesion, Excellent Adhesion, Higher Filler Content, Frost Resistance, High Tensile Strength
VINNAPAS® EP 709 is characterized by its high cohesive strength and tensile strength, thanks to its Tg (glass transition temperature) of about +7 °C. It exhibits excellent adhesion to hard substrates and demonstrates great compatibility with inorganic fillers. As a result, VINNAPAS® EP 709 finds application in joint compounds and other building chemical applications.
VINNOL® H 15/45 M Special
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Primer, Thermal Transfer Ink, Lacquers, Coil Coating, Heat Sealing Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Metal
Glass Transition Temperature (Tg):
74.0 - 74.0 °C
Features:
Grease Resistant, Abrasion Resistance, Alkali Resistance, Oil Resistance, Improves Adhesion, Good Shrinkage Resistance, Corrosion Resistance, Improved Flexibility, Acid Resistance, Good Heat Stability, Good Pigment Wetting, Good Toughness, Physical Drying
VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.
VINNAPAS® eco CA 55
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Acetates
Glass Transition Temperature (Tg):
6.0 - 6.0 °C
VINNAPAS® eco CA 55 is an environmentally conscious product that helps conserve fossil resources. When purchasing this product, it is possible to replace up to 100% of the fossil-based raw materials used in its manufacturing with sustainably certified renewable feedstock. This substitution process follows the REDcert² mass balance approach, which is audited by TÜV Nord. The specific amount of fossil raw material replaced depends on the chosen product version and is specified in the REDcert² certificate.
ELASTOSIL® LR 6200 A/B
Chemical Family:
Silicones
Functions:
Binder & Resin
Product Type:
Solventless & High Solids Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Nylon, Textiles
ELASTOSIL® LR 6200 A/B is a liquid silicone rubber (LSR) that is solvent-free and free-flowing. It utilizes additive curing and consists of two components. This grade is specifically designed for textile coatings. ELASTOSIL® LR 6200 A/B has a very low viscosity, allowing for good penetration into the substrate and a dry surface touch. It is particularly well suited for textile coating applications that require enhanced flame retardancy.
SILRES® BS 45
Functions:
Binder, Binder & Resin
Chemical Family:
Silicones
Compatible Substrates & Surfaces:
Glass
Features:
Low Water Absorption, Longer Performance Life
End Uses:
Top Coat, Plaster
SILRES® BS 45 is a water-dilutable, solventless emulsion of a silicone resin that serves as a binder in the production of silicone resin emulsion paints and plasters. It is primarily used as the main binder in these formulations, playing a crucial role in their performance. The use of SILRES® BS 45 also contributes to low water absorption, which helps to minimize water ingress and enhance the durability of the coatings and plasters. Additionally, products formulated with SILRES® BS 45 have a low tendency to accumulate dirt and soil, maintaining a cleaner appearance over time.
VINNAPAS® EP 7000
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer
End Uses:
Waterborne Sealant, Extrusion Coating
Compatible Substrates & Surfaces:
Paper, Wood
Glass Transition Temperature (Tg):
-3.0 - -3.0 °C
Features:
Low Glass Transition Temperature, Frost Resistance, Fast Setting, High Performance, Excellent Adhesion, Improved Flexibility, Water Resistance
VINNAPAS® EP 7000 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of approximately -3°C. It has been specifically developed as an ultra-high-solids dispersion, providing superior adhesion, wet tack, and setting speed compared to conventional VAE dispersions.
Show
36
of 312 results
Go to page
1
2
3
4
5
6
7
8
9