Products in Aftermarket Parts & Components

NYCOFILL® CPM 10 150 KNF Black is a heat stabilized and 15% Short Glass Fiber Reinforced Nylon 6 copolymer compound suitable for injection molding. This resin was engineered for applications requiring high stiffness, and toughness.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

NITRIFLEX® NBR/PVC PDC-7421 by Valex Group is commonly used as Polymer Compounding for a variety of applications.

E GLASSFLAKE MICRONISED GF007E by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

SR Filler is a functional additive. Its efficiency results from the unique irregular particle shapes, tight particle size distribution, bright & white color, and refractive index similar to the polyolefin resin.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Chemitac 6 is a thermoreactive adhesive for bonding AEM and FKM to rigid substrates. Chemitac 6 is a heavy metal free product.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

Phelmer C delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer C is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

High modulus PA compound reinforced with carbon fibers, Particulary suitable for structural parts, Low density for weight savings approach. Resistivity 108. For SDS, please contact Addiplast Group using the 'Request Document' button.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Synthetic Barium Sulfate (Basofix) is an inspired innovation from 20 Microns Nano Minerals limited. It is specifically developed for the masterbatches & pigments application.

Phelmer G delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer G is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

NBR 4045 is essentially an acrylonitrile (36-40%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. High content of acrylonitrile, very high oil resistance.

NBR 2675 is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Jalpon™ 1470 is a waterborne coating formulated with inhibitors, emulsifiers, surfactants, and other film forming and drying ingredients. When dry, Jalpon™ 1470 leaves a pale amber waxy film that offers a minimum of 500 hours salt spray protection (ASTM B117) and over 2000 hours humidity protection (ASTM D1748). Jalpon™ 1470 is an excellent low VOC automotive anticorrosion coating for OEM and aftermarket applications. It is intended for use as a final preservative coating for equipment and production parts prior to shipment or storage. Jalpon™ 1470 should be considered for any industrial application where solvent is not desirable.

Chemitac 4 is a thermoreactive adhesive for bonding silicone elastomers, HNBR and peroxide_x0002_curable EPDM to rigid substrates. It can also be used as an adhesion promoter for surfaces which cannot be grit blasted, such as engineering ceramics, phosphatized, galvanized, chromatized and stainless steel. Chemitac 4 is a heavy metal free product.

MetaPlast 85 is a reactive ultrafine white alumino-silicate pozzolan formed by calcining very pure hydrous kaolin. Unlike other natural pozzolans, metaplast is water processed to remove unreactive impurities producing an almost 100 percent reactive material. It helps to increase compressive & flexural strength, providing resistance to chemical attack, reducing permeability substantially, maintaining high whiteness, reducing spot-etching, cracking & reducing mottling.

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Chemitac 10 is a thermoreactive adhesive designed for bonding castable polyurethanes (PU) to rigid substrates and textile fibers. Chemitac 10 is a heavy metal free product.

NYCO6 436 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.