Products in Automotive & Transportation: Automotive Exterior Parts

MOCOM Compounds ALCOM® PP 620/1 WT1034-05LB is a base polymer of Polypropylene Homopolymer with a filler/additive system of 15% special filler and 15% mineral. It is highly reflective and opaque, making it suitable for applications such as light guides and reflectors, and is used in the automotive and lighting market segment. The pre-drying conditions involve being in a dry air (dessiccant) dryer or air circulating dryer set between 80-100°C for 2-4 hours with a maximum moisture content of <0.02%. The processing injection molding requires a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALCOM® AWL 15/1 WT1471-04LB is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer blend containing 15% special filler, which is highly reflective and opaque. It is designed for applications in the automotive and various market segments, such as lighting and light blocking components, light guides, and reflectors. The material should be processed using injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. It should not exceed a maximum moisture content of 0.02%.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds ALTECH® PA6 A 3050/100 GB50 is a polyamide 6 base polymer with a 50% glass bead filler/additive system designed for low warpage, easy flow, easy release (demolding), and high heat stabilization. This product is used in the automotive and machinery industries to create injection molded parts, interior decoration/finishing, and exterior parts such as housings, handles, and functional components. For long-term storage, it should be kept dry in a protected area away from light, not exceeding 30°C.

MOCOM Compounds ALFATER® XL A75I 4GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material that features low emission, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It can be used in injection molding, with melt temperatures between 190-220°C, mold temperatures of 10-60°C, injection speed of middle to high, and back pressure of greater than 3 bar. It is suitable for use in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications, such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, 2K components, and casters. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber, and has a service temperature range of -40-125°C.

MOCOM Compounds Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive, building and construction, and various other market segments. Typical applications include housing and automotive trim unpainted, fixing elements, cable ties, and various others. For usage, it should be kept dry, protected from light, and the temperature should not exceed 30°C. For processing injection molding, a melt temperature of 270-290°C is required, and a mold temperature of 40-80°C.

MOCOM Compounds ALFATER® XL ECO A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with excellent resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for a wide variety of applications, including injection molded parts, extruded parts, coextrusion, seals, sealing lips, handles, racking/shelving, impact protection/shock absorbers, protection caps, soft touch elements, cable ducts, casters, profiles, and 2K components. It also has excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. The service temperature range of this polymer is -40 to 125°C.

MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-B A 1000/310 IM is a polypropylene heterophasic copolymer that has been specially modified with elastomer, impact, processing, and heat stabilizers. This material is ideal for automotive applications such as exterior parts, interior decoration/finishing, and transport systems, and is commonly used for housings, functional components, and fixing elements.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds Alcom® PWL 10/1 WT 41-913LB is an impact-modified polycarbonate designed for use in automotive and lighting applications. It contains 15% special filler that gives it a highly reflective, opaque appearance, making it ideal for light blocking components. It should be stored in a dry area and protected from light.

MOCOM Compounds ALCOM® AWL 109/10 WT1218-11LB is a base polymer - acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing a filler/additive system of 10% special filler and special features of being highly reflective, opaque, and highly heat-stabilized. It is suitable for use in the automotive and various market segments, primarily for use in lighting and light-blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® LB PA6 2015 14041 GF15 WT1100-14 is a polyamide 6 base polymer filled with 15% glass fibers and a special filler, providing high stiffness and highly reflective, opaque properties. It is used in the Automotive and Lighting Market segments, with typical applications being reflectors and light blocking components. For processing via injection molding, the melt temperature should be 270-290°C and the mold temperature should be 80-100°C.

MOCOM Compounds ALTECH® PP-B A 1000/726.01 UV is a polypropylene heterophasic copolymer with a pre-drying condition in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or an air circulating dryer at 80-120°C for 2-4 h. It has a melt temperature of 200-240°C and a mold temperature of 20-70°C, and its filler/additive system consists of antioxidant, light stabilizer, lubricant, and is highly UV stabilized, with additional features such as slip agent, heat stabilized, and processing stabilized. It is suitable for market segments such as Automotive and Machinery, with typical applications in housings, handles, and functional components.

MOCOM Compounds ALTECH® PS A 1000/920 UV NC0001-00 is a Polystyrene base polymer with special features of easy release (demolding) and UV stabilization. It is suitable for extruded parts, injection molded parts and exterior parts, and is commonly used in the Automotive, electrical and electronic, and Machinery market segments. Pre-drying conditions should be carried out in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be carried out with a melt temperature of 180-260°C, and a mold temperature of 10-70°C.

MOCOM Compounds TEDUR® L 9560 is a Polyphenylene Sulfide base polymer with a 50% mineral filler/additive system that offers improved surface appearance and high surface gloss. It is used for injection molded parts in the automotive and machinery market segments and typical applications include reflectors. For best results, pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content, followed by processing injection molding with melt temperature 320-340°C and mold temperature greater than 140°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 WT1222-20 is a Polystyrene impact injection molding grade offering easy release (demolding) characteristics, suitable for use in Automotive, electrical and electronic, and building and construction applications. It should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at 60-80°C for 2-3 hours, and processed using injection molding with melt temperature 180-260°C and mold temperature 10-70°C. Typical applications include bezels and housings, and it should be stored in a light-protected environment.

MOCOM Compounds TEDUR® L 9560 S is a Polyphenylene Sulfide injection molding grade with 50% mineral filler/additive system. It has improved surface appearance, high surface gloss, and is metallizable. Pre-drying conditions include drying in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content at 130-140°C. Processing injection molding requires a melt temperature between 320-340°C and a mold temperature above 140°C. Typical applications include reflectors for automotive, lighting and consumer products.

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds ALTECH® PP-B A 1000/120 UV is a polypropylene heterophasic copolymer with UV stabilized, heat stabilized, and processing stabilized properties. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C and is commonly used for automotive exterior parts and functional components, such as housings. Pre-drying is recommended in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h.

MOCOM Compounds ALTECH® ECO PC 2010/121 GF10 IM UV is a polycarbonate-based material with a 10% glass fiber, impact modified filler/additive system and is UV stabilized and easy to release (demolding). It contains recycled material and is suitable for exterior parts in the automotive and various other market segments such as housings and racking/shelving. The material should be stored in a dry, light-protected environment and for processing injection molding, it should be done with a melt temperature of 310-330°C and a mold temperature of 80-130°C.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission, and chemically coupled. It is part of the Automotive market segment and is used to make profiles and bezels. It should be stored in a dry and light-protected environment at not more than 30°C.

MOCOM Compounds ALFATER® XL A70I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It is suitable for a variety of market segments such as automotive, building and construction, electrical and electronic, sport and leisure, and furniture. Typical applications of this product include seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, casters, and 2K components. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber. Additionally, it has a service temperature range of -40-125°C.

MOCOM Compounds ALCOM® PBT 700/2 WT31-956LB is a Polybutylene Terephthalate base polymer with a special filler/additive system that provides high stiffness and a highly reflective, opaque finish. It is used in the automotive and various other market segments for applications such as lighting, light blocking components, light guides, and reflectors. It can be processed for injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. For optimal performance, it should be stored in a dry and light-protected environment.

MOCOM Compounds ALCOM® LB PC 5015 TF 17116 WT1106-17 is a polycarbonate base polymer with a 15% special filler and special features of being highly reflective, opaque, UV stabilized, and improved sliding/wear. It is used in the automotive and lighting market segments, primarily for light guides, reflectors, and light blocking components. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, and a maximum moisture content of 0.02%. For processing in injection molding, the melt temperature should be between 280-310°C and the mold temperature should be between 80-110°C. No extra sentence is needed.

MOCOM Compounds ALCOM® PC740/26 UV WT1407-04LB is a high heat polycarbonate base polymer with a special filler/additive system that is UV stabilized and highly reflective, opaque, and easy to flow. It is suitable for automotive and lighting applications such as light guides, reflectors, and light blocking components. During processing injection molding, the melt temperature should be between 330-340°C and the mold temperature should be between 120-140°C.

MOCOM Compounds ALTECH® PP-B A 2020/150 GF20 CP is a heterophasic copolymer of polypropylene with 20% glass fibers that is chemically coupled, processing stabilized, and heat stabilized. It is suitable for applications in the machinery, automotive, sport, and leisure sectors, such as injection molded parts, interior decoration/finishing, sports equipment, and exterior parts. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALCOM® PBT/ASA 715/1 GF15 TF6 UV WT1287-09LB is a material composed of a base polymer of Polybutylene Terephthalate + Acrylonitrile Styrene Acrylate, a filler/additive system of 15% glass fibers and 6% PTFE, and special features of high reflectivity, opacity, and high stiffness, with UV stabilization. It is developed for the automotive and lighting industries and is suitable for light guides, reflectors, and light blocking components.