Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus | 2700.0 | MPa | ISO 527 |
Tensile Stress at Yield | 65.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 5.1 | % | ISO 527 |
Tensile Elongation at Break | 20.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 250.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 6.5 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 6.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1270.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 137.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 125.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.02 | % | — |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | HB | class | UL 94 |
Glow Wire (GWFI, 850°C, 1mm) | Passed | — | DIN EN 60695 |
Glow Wire (GWFI, 850°C, 2mm) | Passed | — | DIN EN 60695 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 270 - 310 | °C | — |
Mould Temperature | 80 - 110 | °C | — |
Value | Units | Test Method / Conditions | |
Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In an air circulatIng dryer 100-120 °C for 4-12 h
- Dependant on moisture content
- 120 °C in a dry air (dessiccant) dryer for 2-3 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.