Products in Flooring & Surfaces: Good Adhesion

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.

TerraMax 925 is an all-in-one, single step, advanced polymer floor adhesive. The high performance formula drastically reduces the installation time. It delivers superb bond & shear strength in an easy spread, easy clean-up product that requires no mixing or set up time. TerraMax 925 High Performance Wood Floor Adhesive contains no water or solvents and very low VOCs, so it’s easy on installers and the environment. This is the product of choice when the application demands the highest performance adhesive available.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

BD3141 is a flexible, two component acrylic adhesive with incorporated spacer shim (0.030 inch) to maintain a uniform bond line thickness. Like other BD3000 acrylic adhesives, BD3141 is designed to efficiently transfer high loads and evenly distribute stresses. These characteristics distinguish the BD3141 product from other acrylic adhesives that claim high strength and elongation. BD3141 bonds many materials without surface separation or priming and cures rapidly at room temperature.

BD3131 is a flexible, two component acrylic adhesive with incorporated spacer shim (0.030 inch) to maintain a uniform bond line thickness. Like other BD3000 acrylic adhesives, BD3131 is designed to efficiently transfer high loads and evenly distribute stresses. These characteristics distinguish the BD3131 product from other acrylic adhesives that claim high strength and elongation. BD3131 bonds many materials without surface separation or priming and cures rapidly at room temperature.

BD3121 is a flexible, two component acrylic adhesive with incorporated spacer shim (0.030 inch) to maintain a uniform bond line thickness. Like other BD3000 acrylic adhesives, BD3121 is designed to efficiently transfer high loads and evenly distribute stresses. These characteristics distinguish the BD3121 product from other acrylic adhesives that claim high strength and elongation. BD3121 bonds many materials without surface separation or priming and cures rapidly at room temperature.

DURACLAD ECS C-507 HT is a high temperature tile adhesive.

TS202 is a 25% solids high performance proprietary formulation of non-yellowing pure acrylic polymer resin in a <100 g/L VOC water base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS202 provides durable protection, color enhancement, and low gloss “satin look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS202 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. It can also be used as a joint sand stabilizer for interlocking stone, pavers, and brick. It locks pavers in place, prevents erosion of joint sand, and reduces growth of weeds. TS202 has a milky white appearance. Upon proper application, the substrate will have a “satin look” with low gloss finish when dry.

Nitoseal® PU280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self leveling and can be poured directly into hori- zontal joints to form a tough resilient seal possessing a limited degree of flexibility.

ChemMasters’ Traz 25-A is a high solids, Low Volatile Organic Compound (V.O.C.) high performance concrete sealing compound for decorative concrete such as stamped and exposed aggregate. Traz 25-A is formulated with methyl methacrylate polymers that develop high gloss and are more chemically resistant than standard acrylic sealers. Traz 25- A’s film will not yellow under any UV conditions and is extremely durable.

Morgan Adhesives Powergrip White is a thick or thin bed premium cement based tile adhesive for porous type tiles. It has a high bond strength, adhering to all rigid surfaces and exceeds the requirements of Australian Standards AS4992.

Akfix 812 Professional PU Gun Foam (-12°C) is a single-component PU foam used with an applicator gun and developed for applications in temperatures down to -12°C. It does not contain any propellant gasses which are harmful to the ozone layer.

Prokol Protective Coatings MonoSealant is a durable and professional adhesive sealant with unique adhesion properties on EPDM material, that is based on MSPolymer technology and moisture-cures into a durable rubber that retains its elasticity.

Perdure E32 is a water-based epoxy primer/sealer formulated to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. Perdure E32 is specially formulated to reduce concrete outgassing. Perdure E32 has a very low odor and can be used in occupied areas. Perdure E32 is ideal for both new and old concrete surfaces. Perdure E32 is used as a primer for Perdure high build and thin-film coatings systems.

CAC Flexseal PS is a two part joint sealant based on a liquid polysulphide polymer. It is supplied as a 2.5 L pack containing a base component and curing agent in the correct proportions which, when mixed together, cure to form a tough rubber-like material. When cured, the sealant exhibits excellent adhesion to most surfaces including concrete, aluminum and stainless steel. Priming is recommended for porous surfaces and for some specific surfaces and applications.

Aiflooring TerraSeal is designed to be used as a stand-alone thin film system, a silica broadcast system, and the topcoat for the TerraRich system. It provides continuous chemical protection while providing a high-gloss, nonblushing finish for an outstanding appearance. It can be applied from 16-65 mils in smooth or anti-skid applications with moderate physical requirements and intermittent chemical exposure. TerraGrip can be added to TerraSeal to provide slip resistance. It is a two component 100% solids epoxy coatings cured with a cycloaliphatic amine.

CHEM-HCR coating is a two-component, solvent free ep floor coating system that is high in chemical resistance. CHE HCR coating produces a dense tile like coating that will prot walls and floors. CHEM-HCR can be applied on both concr and steel surfaces.

E-Bond 100 Penetrating Sealer is a very low viscosity, two component epoxy specially formulated to penetrate and seal concrete, masonry, rusted steel and most chalky coatings. It is available in amber clear and non-opaque off-white. When used as recommended, it is 100% solids, zero VOC, and will not shrink or entrap solvent upon curing.

CTM Coatings ECTR-VRM is a 100% solid, two component epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECT-VRM-2000 provides excellent resistance to abrasion and chemical resistance. ECTR-VRM meets many requirements such as durability, performance as well as esthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

Aiflooring LV BaseCoat is designed to be used as a basecoat for the TerraChip System. It has a lower viscosity than standard TC Basecoat for easier handling, especially in cooler temperatures. Scrape times for the LV Basecoat can be adjusted by using one, or a blend, of the 3 BaseCoat hardeners- Standard, Redline, and Infrared. LV BaseCoat is a two component 100% solids epoxy.

VAPORTIGHT COAT® SG2 is a unique 2-component, alkali resistant, moisture tolerant, extremely high density and chemically enhanced epoxy based product which prevents capillary infiltration of oil and other chemicals from the ground. Applied in one coat, SG2 reduces the passage of water vapor and moisture through slabs and walls, thus eliminating delamination of adhesives, floor coverings and coatings.

BAI YUN® Anti UV General Purpose Sealant Neutral Cure Silicone Caulk SS850 General Purpose Silicone Sealant is one-component, neutral curing, general purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type door ,window and wall joints.

Rust Bullet® DuraGrade™ Concrete is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states.

Iso-Flex® 609 Epoxy Crack Sealer is a two-component, 100% solids, moisture tolerant epoxy penetrating concrete sealer and hairline crack sealer. It is a very low viscosity resin possessing excellent wetting characteristics and adhesion to both dry and damp concrete.

Perfect Primer Perfect Paint is the complete sealer, primer, and paint in one designed specially for sealing asbestos mastic, VCT tile, cutback glues, lead paint and other difficult and dangerous coatings. PerfectPaint applies directly onto existing asbestos mastic, tile, wood, concrete, or black mastic. The PerfectPaint system comes with our PerfectCleaner floor prep treatment that safely cleans and conditions surfaces without disturbing them, to maximize their adhesion to coatings.

Eclectic E6000 Industrial Adhesive (Clear) is a unique SELF-LEVELING, non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. E6000 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications that are exposed to direct sunlight, paint over E6000 after curing or use E6800 UV formula.

Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete Ultra Low VOC requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states and Air Quality Management Districts.

Mainstay® ML-72™ is a special blend of portland cement, microsilica, thermoplastic fiber, densifiers, admixtures, and other modifiers that produces a high strength and low permeability mortar for the rehabilitation of deteriorated concrete structures. Mainstay® ML-72 produces excellent adhesion to properly prepared new and existing concrete, brick, or steel surfaces. Mainstay® ML-72 can withstand corrosive environments with a pH of 3 or higher, restores structural integrity, seals rough, deteriorated surfaces, and resists external hydrostatic water pressure. Mainstay® ML-72 is suitable for permanent water immersion service. Mainstay® ML-72 can be used to repair vertical, horizontal, and overhead surfaces of deteriorated steel and concrete structures such as manholes, lift stations, wet wells, sewer pipes, culverts, pits, sumps, trenches, tunnels, bridges, piers, or any structure that has experienced deterioration from exposure to aggressive environments.

Coating & Binding Technology Duratec 700i is a water-based, spray applied acrylic glass particle coating system which has been developed to achieve excellent penetration, adhesion, and easy to maintain decorative finish. Duratec 700i has been designed to provide a surface treatment which has excellent waterproofing, durability, UV stability, impact resistance, and long-term performance. Duratec 700i spray-on is available in a wide range of color blends.

TS201 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <350 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS201 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS201 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS201 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

Formula 3000 is a high-strength structural adhesive that is intended to form strong permanent bonds to ceramic tile, steel, aluminum, and other substrates. The plural component system makes it simple to mix equal parts by weight or volume. Hudco Formula 3000 Resin and Hardener are made in contrasting colored thixotropic pastes that the user can easily monitor while blending into the final color. Its buttery viscosity has high "tack" properties that instantly wet substrates and keep HUDCO Formula 3000 in place during application.

Jet Set 10 Hydrophobic Sealing and Grouting Compound is a solvent free, low viscosity resin for the sealing of leaking cracks and joints in concrete structures with continuous moisture exposure. The addition of 6% to 10% Catalyst will accelerate the resin to effectively seal off the leak. The mixed material will react with water to form a foam or gel that can seal and choke off the leak. Kaufman Jet Set 10 may be pumped using a single component pump.