Products in Flooring & Surfaces: Good Adhesion

Akfix Maximum PU Foam is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door & window frames. It yields minimum 100% more foam than straw foams, cures faster and forms easy to cut flexible foam.

Adesiv SRL Adestik 100 is a specific adhesive for fixing self-laying tiles to the floor on pre-existing non-dusting floors such as: wood, concrete, absorbent stone and cementitious self-leveling, thus allowing the tiles to be applied and removed several times.

Perdure U45 is a two-component water-based aliphatic (non-yellowing) polyurethane topcoat for concrete and wood surfaces. Perdure U45 is free from the health and environmental problems normally found in solvent-based polyurethanes while maintaining excellent performance properties. Perdure U45 is a high-performance coating for use in a variety of seamless floor and wall coating systems. Perdure U45 provides a matte finish suitable in areas like clean rooms, hospitals, pharmaceutical facilities, stained concrete and wood floors.

CHEM-POXY GROUT E999 is solvent-free 100% solids, moisture-insensitive three component, ultra-low creep, pumpable, high flow and non-shrink epoxy grout system. It is formulated to be highly flowable for clearances down to 13mm.

POLY ENHANCE (CLEAR) is two-component low-viscosity acrylic urethane coating, primarily for exterior applications. Used to prime or seal various substrates including concrete, decorative or stamped concrete, exposed aggregate, paver stone and brick.

N.E.W. System Sealant - Part No - 50002 is a high quality adhesive and sealant based on Silyl Modified Polymer (SMP). It is designed for making elastic construction joints that require high strength and has very good workability. This product is free of solvents, isocyanates, and pvc. This product belongs to the newest sealant technologies. This product enable broad use in construction, industrial, DIY, automotive, marine and transportation markets. It has excellent adhesion, movement capabilities, good UV and heat stability.

DURACLAD C-507 HT is a high temperature tile adhesive.

DURACLAD C-307 is a tile adhesive.

DURACLAD C-307 FS is a fast setting tile adhesive.

Ktisepox Hydro PR can be applied on a variety of surfaces such as concrete industrial floors and cement mortar surfaces. This product is a 2-component, water-based epoxy primer system that has strong adhesive properties. The product is eco-friendly and contains no VOCs.

Morgan Adhesives Powergrip Premium is a thick or thin bed premium cement based tile adhesive for porous type tiles. It has a high bond strength, adhering to all rigid surfaces and exceeds the requirements of ISO 13007.

Akfix 888P Flexible PU Gun Foam is a single-component PU flexible foam used with an applicator gun and features flexibility, high performance, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer. The foam has a minimum expansion after application (less than 50%) and is therefore very economical to use. The foam is very elastic and has a very high acoustic rating and thermal insulation value.

Bond-Grip is an acrylic primer formulated to provide a tie coat prior to the application of DURA-GRIP Concrete and driveway coating. When applied over properly prepared surfaces, Bond-Grip dries quickly to give a tight bond to promote good adhesion.

EucoFloor Epoxy Primer is a three-component, high-performance bonding system, consisting of two components, medium viscosity epoxy (sold by Euclid Chemical) and oven-dried, coarse silica sand (sold separately- locally sourced by end-user). The medium viscosity epoxy is mixed and applied to the prepared concrete substrate, and is then immediately broadcast/”seeded” to refusal with the oven-dried coarse silica sand. This creates an aggressive surface profile that provides unsurpassed mechanical bonding for the subsequent cementitious topping.

Akfix 3XL High Expansion PU Gun Foam is a single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer.

TS200 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <700 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS200 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS200 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS200 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

BAI YUN® Gray Waterproof General Purpose Sealant One Component Silicone Sealant SS850 General Purpose Silicone Sealant is one-component, neutral curing, general purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type door ,window and wall joints.

DURACLAD ECS C-307 FS is a fast setting tile adhesive.

Acryrub Firestop is a one-part acrylic latex caulk designed for sealing around through penetrations in fire-rated wall and floor assemblies to return those assemblies to their fire-rating.

3F North America Conductive Copper Tape, One-Sided Self-Adhesive 98000 is a Hot Melt Adhesive Film, Permanent Adhesive, Conductive Copper Film Carrier.

Akfix 806 Door & Window Polyurethane Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It is designed for easy filling of door and window profiles with low expansion and pressure rates.

Stamped & Decorative Concrete Sealer 400A is a film forming sealer specifically manufactured to provide 200 to 300% more working time on stamped concrete, exposed aggregate, and other forms of decorative concrete than traditional low-VOC sealers. Stamped & Decorative Concrete Sealer 400A will not produce bubbles under normal conditions unlike sealers formulated with common, fast evaporating, low-VOC solvents. It is formulated with a proprietary resin that develops high gloss and provides superior chemical resistance. Stamped & Decorative Concrete Sealer 400A’s film will not yellow under any UV conditions, virtually eliminates cobweb formation during application, and is extremely durable. Stamped & Decorative Concrete Sealer 400A is a solvent-based product meeting low-VOC requirements < 400 g/L.

Arabian Chemical Industries ISOFIX is a non- reemulsifiable liquid emulsion of pure acrylic polymer and modifiers specially formulated for improvingthe physical properties and adhesion of portland cement mixes. ISOFIX improves the tensile, flexural, adhesive, cohesiveand weathering properties of cementitious mixtures. It is non-yellowing and has excellent resistance to UV degradation, hydrolysis and most chemicals. Mixtures containing ISOFIX can be used above or below ground, exterior or interior.

Duromar® Durofil is a specially formulated 100% solids epoxy grout and rebuilding product for filling holes and rebuilding severely chemically attacked concrete floors and secondary containment areas. Duromar® Durofil provides an excellent base for other DUROFLOR® products, such as CHEMCRETE, DF-4301, etc., where more acid resistance or a smoother finish is required.

BAI YUN® BAIYUN Caulk Ceiling Wall Joint Class 20 Window And Door Silicone Sealant SS804 Silicone Joint Sealant is a one-component, neutral curing, general-purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type of doors, windows, and wall joints.

Aiflooring TC BaseCoat is designed to be used as the basecoat of the TerraChip System. It is supplied pigmented and is self priming. Scrape times for TC Basecoat can be adjusted by using one, or a blend, of the 3 BaseCoat hardeners- Standard, Redline, and Infrared. TC BaseCoat is a two component 100% solids epoxy.

DURACLAD ECS C-307 is a tile adhesive.

Adesiv SRL Euro Gold is a 2 component, water-free epoxy-polyurethane adhesive for gluing wooden floors to cement screeds or preexisting non-absorbent floors (marble, tiles, palladian, wooden substrates).

MICOROX® FLOORLIFE™ PRIMER is a 77% non-volatile primer designed to improve the adhesion of trowelled, slurry or roller applied coatings to concrete and other substrata. MICOROX® FLOORLIFE™ PRIMER is designed for use under all FLOORLIFE™ 3-part trowel or slurry applied systems. It features low viscosity for deep penetration, long working life, and outstanding adhesion.

Adesiv SRL Pelpren PL6 is a wWater-free two-component epoxy-polyurethane adhesive, specific for gluing wooden floors of any type on cementitious substrates or on pre-existing non-absorbent floors (marble, tiles, palladian, wooden substrates). On pre-existing poorly or non-absorbent substrates, always provide for an appropriate abrasion of the surface, followed by adequate cleaning, before proceeding with gluing.

Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete Ultra Low VOC requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states and Air Quality Management Districts.

Eclectic E6000 Industrial Adhesive (Clear) is a unique SELF-LEVELING, non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. E6000 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications that are exposed to direct sunlight, paint over E6000 after curing or use E6800 UV formula.

TS201 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <350 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS201 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS201 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS201 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

Perfect Primer Perfect Paint is the complete sealer, primer, and paint in one designed specially for sealing asbestos mastic, VCT tile, cutback glues, lead paint and other difficult and dangerous coatings. PerfectPaint applies directly onto existing asbestos mastic, tile, wood, concrete, or black mastic. The PerfectPaint system comes with our PerfectCleaner floor prep treatment that safely cleans and conditions surfaces without disturbing them, to maximize their adhesion to coatings.

Perdure E32 is a water-based epoxy primer/sealer formulated to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. Perdure E32 is specially formulated to reduce concrete outgassing. Perdure E32 has a very low odor and can be used in occupied areas. Perdure E32 is ideal for both new and old concrete surfaces. Perdure E32 is used as a primer for Perdure high build and thin-film coatings systems.

MiraPatch RM 3000 is a single component, polymer-modified, pre-blended cementitious repair mortar fortified with micro-fiber reinforcement and shrinkage-compensating additives to achieve exceptional physical properties with very low drying shrinkage. Designed for horizontal and vertical applications, MiraPatch RM 3000 can be troweled-applied at a minimum depth 1/8” up to 1”. For repair depths 1” and greater, extend mortar with 3/8” clean coarse aggregate to produce MiraPatch RM 3000 concrete.