Products in Fillers, Levellers & Joints: Chemical Resistant

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

9200FR is a toughened, flame retardant, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through.

9200 is a toughened, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration-resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through. For a flame retardant version, use 9200FR.

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

Uroflex™ 61 is a two component, 100% solid urethane‐modified‐epoxy (UME) hybrid coating and/or lining system specifically designed for utilization in potable, drinking water environments. Uroflex™ 61 is certified by UL to NSF/ANSI Standard 61. Uroflex™ 61 is a high‐build, self‐leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete, steel, and wood. Uroflex™ 61 is applicator friendly and easy to apply; conveniently produced in a one‐to‐one mix ratio by volume. Uroflex™ 61 is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent)‐ certified UL to NSF/ANSI Standard 61.

True-Bond CR™ is formulated to resist chemicals, including acids and caustics. Commonly used for coating chemical containment areas and repairing drain openings, this material stands up to your very worst!. True-Bond CR™ concrete filler and bonder that will not be affected by chemicals or acids Will not separate from concrete. Resurfaces chipped and pitted concrete. Resists wear, weather, impact Bonds cracked curbing, and masonry. Waterproof One application lasts for many years.

Akfix 812 Multi Purpose PU Foam (-12°C) is a single-component PU foam used with an applicator gun and developed for applications in temperatures down to -12°C. It does not contain any propellant gasses which are harmful to the ozone layer.

Pilgrim Permocoat EM 5-2 is a versatile system with excellent physical and chemical properties. High strength, solvent free adhesives for structural bonding, grouting, dowel or rebar anchoring. Use neat as an adhesive or mix with an aggregate as a no-shrink mortar for patching and topping, for splicing concrete piling, for leveling heavy equipment and for anchoring bolts. Use as a bonding adhesive between plastic concrete and hardened concrete. Use on dry or damp substrates.

KEY #715 is a 100% solids epoxy crack filler used to patch or repair floor and wall surfaces. KEY #715 is the ideal material for repair of concrete surfaces damaged from environmental or chemical attack. KEY #715 can also be used as a base material beneath coating, slurry, and mortar systems to repair defects in the concrete before coating.

AquaGrip® 2600 Grout is used as a concrete patching and resurfacing compound in preparation for the concrete to receive a topcoat.

Durapatch mMa is a two component, methyl methacrylate based concrete patching material. Durapatch mMa sets very rapidly to minimize downtime or traffic disruption. When mixed, Durapatch mMa forms a durable polymer concrete which bonds tenaciously to the concrete substrate and develops very high compressive strength. Durapatch mMa resists freeze thaw damage and has excellent chemical resistance.

Precision Epoxy Products FP-85 is the pigmented version of the FP Series Epoxies for use in surface plate applications. Available in 14 standard colors with custom colors available upon request. Both Floor Plate Epoxies are extremely durable, chemical resistant with excellent scratch and impact resistance.

RC 1650 Acrylic Seam Compound is a high quality, high solids, acrylic elastomeric seam sealer designed to bridge and seal seams, gutters, vent pipe flashings, air conditioning units and expansion joints for all types of roofing substrates. RC 1650 has excellent weatherability and ultraviolet resistance. RC 1650 also offers a flexible, durable sealer with excellent resistance to mechanical or chemical attacks.

Precision Epoxy Products SC-15P is a colored system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. The standard color is 'Black' but, it can be pigmented to a color of choice and is excellent for hiding substrate surfaces. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15P is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is pigmented to allow for additional de-air additives which makes this system a less technical application than the SC-15N.

Chemester® Mortar is an epoxy novolac based vinyl ester resin mortar for chemical resistant brick and tile vessel construction.

CHEM-POXY GROUT E999 is solvent-free 100% solids, moisture-insensitive three component, ultra-low creep, pumpable, high flow and non-shrink epoxy grout system. It is formulated to be highly flowable for clearances down to 13mm.

Pennsealer EE-CT is a single component, waterbased, cationic, coal tar epoxy sealer / coating. Specially designed urethane modified epoxy polyelectrolyte emulsion offers unique interactive technology to this compound, which upon cure, produces a tough, durable and protective coating to the treated surface.

Alkor® Mortar is a specially formulated furan mortar for chemical resistant brick construction.

Nitoseal® PU280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self leveling and can be poured directly into hori- zontal joints to form a tough resilient seal possessing a limited degree of flexibility.

SurePoxy HM Class B is a high modulus, 100% solids, two-component, moisture-insensitive, epoxy resin system. It is an all-purpose, very high strength rigid adhesive designed for structural bonding of dry and damp materials free of standing water, and may be used with concrete, metals such as steel, wood, and other substrates. This product is chemically engineered specifically for cold weather work in temperatures as low as 32°F. SurePoxy HM Class B does not contain fillers or non-reactive diluents.

Uroseal™ 45V polyurethane joint sealant is a two-components, aliphatic, chemically curing, 100% solid urethane sealant formulated as a high build coating / joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality elastomeric sealant. Uroseal™ 45V is ideally suited for indoors or outdoors with use on concrete, wood, and most construction materials. Uroseal™ 45V produces a flexible, long‐lasting sealant with extraordinary adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and many chemicals. Provides corrosion protection and chemical resistance; and because of its mixed gel‐state, it is specially designed for use on vertical and overhead applications.

KEY #780 is a 100% solids semi-rigid epoxy joint filler used to protect saw cut joints in concrete slabs or in repair of existing damaged joints. KEY #780 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges. KEY #780 is available in Regular Cure (RC), Fast Cure (FC), and Super Fast Cure (SFC) formulations.

Pennsealer EE is a single component, waterbased, cationic, epoxy sealer. Specially designed urethane modified ATV epoxy polyelectrolyte emulsion offers unique features to this sealer, which upon cure, produces a tough, durable and protective finish to the treated surface.

Midwest Industrial Products Corporation Deep Mix Grout 141 is a 100% solids 3 component epoxy mortar that has a very high loading of super hard, dense Aggregates. It is extremely strong and can stand up to grinding steel wheel traffic and brutal impact. It has outstanding chemical resistance and can be used in highly corrosive areas.

CPP™ Gel™ is a two-component, high strength, extremely forgiving/tolerant, vertical and overhead, non-sag. fast set epoxy paste, packaged in a convenient 1-to-1 mix ratio to use as needed and restock. The Epoxytec CPP Gel provides a point-of-use application to save time and material. The material has a wide variety of applications and is often sought for concrete, steel, and other substrate repairs, filling, patching and as an adhesive. Epoxy-based material is a sealed and protective solution to combat corrosion.

KEY #783 is a 100% solids, semi-rigid epoxy novolac joint filler used to provide chemical resistant protection for saw-cut joints (contraction/control joints) in concrete slabs or to repair existing damaged joints. KEY #783 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.

EPOXYPLUS is the latest advancement in non-staining technology. Specially formulated with 100% solid epoxy resins and hardeners, EPOXYPLUS uses integrally colored quartz fillers, which eliminates pigment staining of tiles, typical of traditional cement and epoxy grouts and joint filters. It can be used for setting and grouting ceramic tile, pavers, marble and stone over a variety of substrates.

Precision Epoxy Products SC-15N is a clear system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15N is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is used for laminating surfaces that may need to be visible under the epoxy overlay.

Cactus Industrial PMMA-Based Self Leveling Mortar is a solvent-free, fast-reactive, flexibilised and filled self-smoothing mortar. It’s a 3-component methacrylate compound that delivers outstanding impact resistance, while its high elasticity ensures lasting crack-bridging. This is a versatile technology that can be used a hard wearing layer for waterproofing, thick-film layer and equalizing layer. It is a solvent-free, 3-component, fast-reactive, flexibilised and filled PMMA-based self-leveling mortar.

CPP™ Gel: Crack Injection is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength epoxy paste and reinforced structural-grade epoxy. Similar to “standard” CPP once cured, this version is packaged more conveniently for Crack Injection and repair by extrusion. Contains no solvents. CPP™ Gel: Crack Injection bonds to concrete, steel, wood, brick, some plastics and most construction materials. Application temperature range is between 40°F and 100°F.

DuraPatch EPX is a specially formulated, three-component, l00% solids epoxy patching system for resurfacing and repair of concrete substrates. DuraPatch EPX contains a quartz aggregate blend for heavy duty, industrial floors.

Detroit Body Filler 72525 is a fiberglass reinforced, isophthalic polyester adhesive with high chemical and heat resistance. This material displays excellent vertical hang properties while spreading and feathering smoothly.72525 should be used where a bonding putty is required. It can also be used to radius, fill or fairing.

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

Koster EM-VS is a universally applicable, water based, scratch-resistant epoxy resin sealant with very high covering power. It bonds very well to all cementitious substrates.

Cretelox is a super impact and chemical resistant urethane mortar for concrete repairs and leveling of floors in industrial and marine environments. A trowelable epoxy mortar where high loads, abrasion and impact is a major concern combined with chemical attacks.