Products in Consumer Goods: Good Weather Stability

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

LNP™ VERTON™ Compound MVL36SX0 combines polypropylene (PP) resin with 30% long glass fibers and PTFE, offering a robust solution for structural applications. This compound is chemically coupled for enhanced performance, heat stabilized to maintain strength across temperature variations, and boasts wear-resistant properties. It is designed to withstand outdoor conditions with UV stability, making it suitable for automotive exteriors, water management systems, and various industrial applications. LNP™ VERTON™ Compound MVL36SX0 delivers high stiffness and strength, ensuring durability and reliability in sport and leisure equipment, home appliances, and commercial appliances. Ideal for injection molding processes, it provides excellent dimensional stability and processability, meeting the demanding requirements of modern manufacturing.

LNP™ VERTON™ Compound MV008SU integrates polypropylene (PP) resin with a robust 40% long glass fiber composition, enhancing structural integrity and stiffness. This compound is engineered with chemical coupling for optimized performance, along with heat and UV stabilization to ensure durability and weather resistance. It is tailored for demanding applications in automotive exteriors, building components, water management systems, sports and leisure equipment, as well as home and commercial appliances.

LNP™ VERTON™ Compound UV00AS is formulated with Polyphthalamide (PPA) resin and 50% long glass fiber, offering exceptional heat stabilization and structural integrity. This compound is designed to excel in high-temperature environments, ensuring reliable performance under thermal stress. Its composition enhances dimensional stability and mechanical strength, making it suitable for demanding applications in automotive, electrical, and industrial sectors where heat resistance and robust structural properties are critical. LNP™ VERTON™ Compound UV00AS provides manufacturers with a versatile solution for components requiring both durability and thermal stability, meeting stringent performance requirements across various industries.

LNP™ ELCRES™ EXL9334U is based on polycarbonate (pc) siloxane copolymer resin, featuring excellent UV resistance. It is UL94 V0 rated at 1.5mm for flame retardancy using non-bromine, non-chlorine FR systems. This medium-flow, opaque material is suitable for injection molding and sheet extrusion applications. It offers extreme low-temperature ductility at -40°C and excellent processability, with opportunities for shorter injection molding cycle times compared to standard PC. Available in a wide range of opaque colors, it is targeted for a variety of applications.

LNP™ VERTON™ Compound MV007SU utilizes polypropylene (PP) resin with a high content of 35% long glass fiber, enhancing its structural integrity and strength. This compound is chemically coupled for improved performance and is further fortified with UV and heat stabilizers, ensuring durability and weather resistance. Designed for rigorous applications across automotive exteriors, building components, water management, sports and leisure equipment, as well as home and commercial appliances, this product offers excellent mechanical properties and stability. It is particularly suitable for injection molding processes, providing reliable performance in diverse industrial and consumer environments.

LNP™ VERTON™ Compound RVL29U utilizes Polyamide 66 (nylon 66) resin combined with 45% long glass fiber and 10% PTFE to provide a robust solution featuring UV stabilization, wear resistance, and structural integrity. This compound is designed for applications requiring durability and reliability in outdoor environments, offering enhanced resistance to weathering and prolonged exposure to sunlight. The addition of PTFE enhances the material's wear resistance, reducing friction and ensuring prolonged performance in demanding conditions. LNP™ VERTON™ Compound RVL29U is suitable for a wide range of applications including automotive components, electrical enclosures, and industrial machinery where high mechanical strength and longevity are crucial. Its composition supports efficient processing and consistent quality in injection molding processes, ensuring precision and reliability in component manufacturing.

LNP™ VERTON™ Compound RX06424 incorporates Polyamide 66 (nylon 66) resin with a high content of 60% long glass fiber, enhancing its mechanical properties significantly. Designed for easy molding, this compound offers manufacturers efficiency and versatility in processing. It is heat stabilized and UV stabilized, ensuring prolonged durability and performance in challenging environmental conditions. The structural reinforcement of LNP™ VERTON™ Compound RX06424 makes it suitable for applications where strength and reliability are critical, such as automotive components, industrial machinery, and outdoor equipment. This compound strikes a balance between robust mechanical strength, dimensional stability, and resistance to weathering, making it an excellent choice for demanding engineering applications requiring high-performance materials.

LNP™ ELCRIN™ 6XEUIQ2RCC (also known as ELCRIN ER011567) is based on polycarbonate (pc) and polybutylene terephthalate (pbt) alloy, utilizing iQ PBT generation 2 technology with a minimum of 42% post-consumer recycled (PCR) content. This material offers excellent low-temperature impact strength, good surface esthetics, and good chemical resistance.

LNP™ VERTON™ Compound RV00AEU is crafted from polyamide 66 (nylon 66) resin with 50% long glass fiber content, offering exceptional properties for structural applications. This compound combines easy molding capabilities with UV stabilization, ensuring prolonged durability and performance under outdoor conditions. It is designed to meet the high demands of various industries including automotive, industrial, and consumer goods. LNP™ VERTON™ Compound RV00AEU delivers high stiffness and strength, making it ideal for components where both mechanical robustness and esthetic appeal are essential.

NORYL™ Resin SE100X is a non-reinforced blend of polyphenylene ether (PPE) and high-impact polystyrene (HIPS). This injection moldable grade features non-brominated, non-chlorinated flame retardants, achieving a UL94 flame rating of V0 at 6 mm and V1 at 1.5 mm, complemented by a UL746C outdoor suitability rating of F1. NORYL™ Resin SE100X excels in electrical performance, boasting low moisture absorption, excellent flow properties, dimensional stability, and hydrolytic stability. Specifically engineered for both indoor and outdoor applications, including electrical enclosures, wall plates, sockets, switches, and connectors, NORYL™ Resin SE100X offers manufacturers a reliable material solution capable of meeting stringent safety standards while maintaining robust performance across diverse environmental conditions.

LNP™ VERTON™ Compound MV00ASU leverages polypropylene (PP) resin enhanced with 50% long glass fibers, providing exceptional structural strength and stiffness. This compound is chemically coupled for superior performance, heat stabilized to withstand varying temperatures, and UV stabilized for prolonged outdoor exposure. Designed for demanding applications in automotive exteriors, building components, water management systems, and various industrial and consumer goods, LNP™ VERTON™ Compound MV00ASU ensures high stiffness and dimensional stability. It excels in injection molding processes, offering reliable performance without the use of intentionally added PFAS, meeting stringent environmental and safety standards. Ideal for applications requiring weather resistance and durability, LNP™ VERTON™ Compound MV00ASU delivers robust solutions across diverse industries.

LNP™ VERTON™ Compound UV00ASU combines Polyphthalamide (PPA) resin with 50% long glass fiber, offering outstanding UV and heat stabilization along with robust structural properties. This formulation ensures resilience against prolonged exposure to sunlight and high temperatures, making it ideal for outdoor and automotive applications where weathering and thermal resistance are crucial. The compound's enhanced mechanical strength and dimensional stability contribute to its suitability in demanding environments, providing reliable performance over extended periods. LNP™ VERTON™ Compound UV00ASU is designed to meet the stringent requirements of industries seeking durable materials that withstand environmental stresses while maintaining integrity and performance.

LNP™ ELCRIN™ DMX1234RCC is an improved scratch-resistant polycarbonate copolymer containing 25% post-consumer recycled content. This standard flow, UV-stabilized, custom-colorable resin is unreinforced and features excellent scratch resistance, impact resistance, and weatherability with no PFAS intentionally added. Suitable for injection molding, it is ideal for a variety of applications, including automotive interiors, sport/leisure, personal accessories, home and commercial appliances, electrical devices and displays, and electrical components and infrastructure.

LNP™ VERTON™ Compound RX06422 combines Polyamide 66 (nylon 66) resin with 50% long glass fiber, offering enhanced properties suitable for a variety of applications. This compound is specifically engineered for easy molding, providing manufacturers with flexibility and efficiency in production processes. It features heat stabilization and UV stabilization, ensuring durability and performance in outdoor and high-temperature environments. Its structural integrity makes it ideal for applications where strength and reliability are crucial, such as automotive components, industrial equipment, and outdoor products. This product delivers a balance of mechanical strength, dimensional stability, and weather resistance, making it a versatile choice for demanding engineering applications.

SABIC's Specialties Business LNP ELCRIN 610001UiQ2 (also known as ELCRIN ER011568) is a non-brominated, non-chlorinated flame retardant Polycarbonate / Polybutylene Terephthalate (PC/PBT) alloy, utilizing iQ PBT generation 2 technology with minimum 12% post consumer recycled content. Added features of this material include: good impact strength, good chemical resistance, improved heat resistance, bright white color achievable, UL V-0 rating at 1.5 mm thickness and easy flow ability.

SABIC's Specialties Business LNP™ THERMOTUF™ PF003IU compound is based on Nylon 6 resin containing 15% glass fiber. Added features of this grade include: Impact Modified and UV Stabilized.

SABIC's Specialties Business LNP ELCRES SLX2271AML is based on Polycarbonate (PC) siloxane copolymer resin. It is an antimicrobial compound available in transparent and tinted colors. Added features of this grade include: Good Weatherability and Scratch Resistance.

SABIC's Specialties Business LNP ELCRIN 610001UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 12% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, High Impact, Improved Chemical Resistance, UV Resistant.

SABIC's Specialties Business LNP™ THERMOTUF™ D1000UF compound is based on Polycarbonate (PC) resin. Added features of this grade include: UV stabilized, impact modified, good low temperature ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC resins. This is a general-purpose product available in a wide range of opaque colors and may be an excellent candidate for a broad range of applications.

SABIC's Specialties Business LNP THERMOTUF V1000UXC compound is based on Super Tough Nylon resin. Added features of this grade include: Impact Modified, UV Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP ELCRIN 61000PUiQ2 (also known as ELCRIN ER011364) is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) alloy, utilizing iQ PBT generation 2 technology with 23% post consumer recycled content. Added features of this material include: excellent low temperature impact strength, improve retention of mechanical properties under UV exposure, good surface esthetics, good chemical resistance and easy flow ability.

SABIC's Specialties Business LNP ELCRIN 610009UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 19% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Flame Retardant, UL746C F1 Rating, UL94 V0 and 5VA Flame Rating, UV Resistant, Impact Modified, Excellent Chemical Resistance. This is a good candidate for applications in the electrical industry including bobbins, switches, and enclosures.

SABIC's Specialties Business LNP ELCRES EXL9334 is based on Polycarbonate (PC) siloxane copolymer resin. It is a UV stabilized, medium flow opaque material suitable for injection molding (IM) and sheet extrusion applications. This grade offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40°C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. It is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

LNP THERMOTUF V1000SU compound is based on unfilled Super Touch Nylon resin. Added features of this grade include: Impact Modified, Heat Stabilized, UV Stabilized.

SABIC's Specialties Business LNP ELCRES EXL9034 is based on Polycarbonate (PC) siloxane copolymer resin with excellent low temperature ductility, robust flame retardancy (V0/5VA), good processability and electrical tracking resistance. It is UV stabilized with F1 rating and is a good candidate for applications like photovoltaic connectors.

LNP THERMOCOMP MX06403 compound is based on Polypropylene (PP) resin containing 20% glass fiber. Added features of this grade include: Heat Stabilized, UV Stabilized.

LNP THERMOCOMP PFW53U compound is based on Nylon 6 resin containing 15% glass fiber, 25% wollastonite. Added features of this grade include: UV Stabilized.

LNP THERMOCOMP WX15003 compound is based on Polybutylene Terephthalate (PBT) resin containing 45 % glass fiber/mineral. Added features of this grade include: UV stabilized.

SABIC's Specialties Business LNP THERMOCOMP WF0039U compound is based on Polybutylene Terephthalate (PBT) resin containing 15% glass fiber. Added features of this grade include: Flame Retardant and UV Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business CYCOLOY CX7240U Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated UV stabilized flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.