Products in Devices & Assemblies: Binder & Resin

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SABIC's Specialties Business ULTEM™ 1010P200 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 200 micron and a maximum particle size (D100) of 450 micron. It may offer a high glass transition temperature (Tg) of 217°C. It has a lower molecular weight than 1000P200. Features are excellent mechanical, electrical and dimension properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS Compliant. The base material is transparent amber colored.

SABIC's Specialties Business ULTEM 1000P100 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 100 micron and a maximum particle size (D100) of 150 micron. It may offer a high glass transition temperature (Tg) of 217°C. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS. The base material is transparent amber colored.

SABIC's Specialties Business ULTEM 1000P200 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 200 micron and a maximum particle size (D100) of 450 micron.. It may offer a high glass transition temperature (Tg) of 217°C. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS Compliant. The base material is transparent amber colored. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 1000P is an amorphous polyetherimide (PEI) powder resin with an average particle size (D50) of 350 microns. It offers a high glass transition temperature (Tg) of 217°C and excellent mechanical, electrical, and dimensional properties even at high temperatures. This material is also highly resistant to chemicals for an amorphous material and is inherently flame-retardant. The base material is transparent amber in color and is RoHS-compliant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 1010P Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 350 micron. It may offer a high glass transition temperature (Tg) of 217°C. It has a lower molecular weight then 1000P. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The may offer very good chemical resistance for an amorphous material and is inherently flame retarded. The material is RoHS Compliant. The base material is transparent amber colored. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion.Features:VOC-free, APEO surfactant free.Excellent chemical and stain resistance.Forms durable, films under ambient or force-dried conditions.Superior abrasion resistance.Fast water-release properties.

Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. Features: Superior adhesion to PVC and treated polypropylene film. Excellent UV resistance. Good alcohol resistance. Good humidity resistance. Contains n-methyl pyrrolidone co-solvent.

Hauthane L-3790 is a water-borne, UV-curable, polycarbonate-based polyurethane dispersion. Features: Excellent chemical- and stain-resistance. Superior humidity resistance. Forms durable, films under ambient or force-dried conditions. APEO-free. Fast water-release properties. Contains dipropylene glycol dimethylether (DMM) co-solvent.

Hauthane HD-2142 DMM (L-2942) is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. Features: Superior adhesion to PVC and treated polypropylene film. Excellent UV resistance. Exceptional alcohol resistance. Humidity resistance. Contains dipropylene glycol dimethyl ether (DMM) co-solvent.

Hauthane L-3685 is a water-borne, UV-curable, polycarbonate-based polyurethane dispersion. Features: Excellent chemical- and stain-resistance. Superior humidity resistance. Forms durable, films under ambient or force-dried conditions. APEO-free Fast water-release properties. Contains n-methyl pyrrolidone (NMP) co-solvent.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-800C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-800C has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-700C is a compound designed for use in automotive fuel hoses. This functionalized polymer is ideal for hose constructions that require chemical resistance, permeation resistance, and unsurpassed protection against static buildup. AH-700C balances performance and economics. It is supplied in cylindrical pellet form, with pellets measuring approximately 0.080 inches in diameter and 0.125 inches in length.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-600C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-600C offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive LM-ETFE AH-600 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long. It offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-800 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. AH-800 has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-700 is a functionalized polymer designed for use in automotive applications. It is based on ETFE and has been chemically modified to adhere to polyamides during the co-extrusion process. The compound is available in pellet form, measuring approximately 0.080 inches in diameter and 0.125 inches in length.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-700 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. Non-Conductive AH-700 balances performance and economics. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

EBECRYL® 109 is a dynamic acrylate-methacrylate monomer blend, combines 50% trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). Under free radical influence, this formulation swiftly polymerizes, making it ideal for coatings that demand superior thermal and chemical resistance. Highly recommended for applications requiring robust protection, EBECRYL® 109 excels in coatings necessitating enhanced chemical and thermal durability. It proves beneficial in solder and etch resists, ensuring optimal performance in challenging environments.

POSIL 25 is potassium silicate. It is used as covering material of welding rod binder and tv cathode-ray tube fluorescent material.

Hydroxyl acrylic resin Human Chemicals SPA-4530 is a Solvent-based resin.It has Aluminum orientation ,Pigment dispersion,Abrasion resistance and Good adhesion.

Quaker Color Wood Coatings AB-72FD is NMP free, high performance aliphatic polyester urethane dispersion with adhesion over plastic and metal substrates. It could be used as a one component or crosslinked with isocyanate and through COOH functional groups to form high chemical and UV resistant coatings.

ADMAFINE SO-E2 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Quaker Color Plastic Coatings AB-72FD is NMP free, high performance aliphatic polyester urethane dispersion with adhesion over plastic and metal substrates. It could be used as a one component or crosslinked with isocyanate and through COOH functional groups to form high chemical and UV resistant coatings.

Quaker Color Metal Coatings AB-90F is NMP free, high performance aliphatic polyester urethane dispersion with adhesion on metal, plastic and concrete substrates. AB-90F could be used as is or with crosslinked through COOH functional groups. Coatings based on AB90F will be hard and with high chemical, solvent and water resistance.

POSIL 45 is potassium silicate. It is used as covering material of welding rod binder and tv cathode-ray tube fluorescent material.

Human Chemicals SPA-4401 is a Solvent-based resin. It has Aluminum orientation,Alcohol resistance , Aluminum dropping resistance and No abnormal appearance . Its used in Consumer Electronics.