Products in Electrical & Electronics: Very Good Heat Resistance

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.

SABIC's Specialties Business ULTEM™ Resin 2110 is a 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 1010M Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains a reduced level of internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ 1010P200 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 200 micron and a maximum particle size (D100) of 450 micron. It may offer a high glass transition temperature (Tg) of 217°C. It has a lower molecular weight than 1000P200. Features are excellent mechanical, electrical and dimension properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS Compliant. The base material is transparent amber colored.

High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability.

SABIC's Specialties Business ULTEM™ Resin 1000 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS-compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance needs to be checked case by case for colored variants. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method). Contains low level of mold release. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 10% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 2310F resin is an improved flow 30% glass fiber reinforced polyetherimide resin. The material has global food contact approvals (FDA, CN, EC). The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers. It offers UL94 V0 and 5VA ratings. The material can also offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 2310R is an improved flow 30% glass fiber reinforced polyetherimide resin with an added internal mold release. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

SABIC's Specialties Business ULTEM 1010F Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and global food compliance (FDA, CN, EC). Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may provide low staining, microwave transparent and cold to the touch solutions. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 2200 is a 20% Glass fiber filled, standard flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.