Electronics Coatings

The Mitsubishi Chemical Group

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ Epoxy YX7110

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Bomar Specialties LLC

Bomar Oligomers® BR-641D

Bomar™ BR-641D is a Polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass,and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene,and Polypropylene.

The Mitsubishi Chemical Group

jER™ 1256

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

NuSil Technology

NuSil™ CV-1152

NuSil™ CV-1152 is a controlled volatility RTV silicone conformal coating.

Bomar Specialties LLC

Bomar Oligomers® BRS-14320S

Bomar® BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications

NuSil Technology

NuSil™ R-3930

NuSil™ R-3930 is a RTV fluorosilicone dispersion.

allnex

EBECRYL® 8413

EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

IGM Resins

Esacure ONE

Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).

Bomar Specialties LLC

Bomar Oligomers® BR-970H

Bomar®BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has high modulus and doesn’t necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well for use in Graphic Arts application. This oligomer canalsobe used in electronics, and automotive applications

Bomar Specialties LLC

Bomar Oligomers® BR-640D

Bomar™BR-640Dis a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640Dwithstands the extremes of temperature typical of such tests, without undue degradation of properties.Excellent hydrophobic properties exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS.

NuSil Technology

NuSil™ CF5-3521-2

NuSil™ CF5-3521-2 is fluorosilicone elastomer. Use as a coating, sealant, adhesive or molding material in applications requiring solvent resistance.

Georgia-Pacific Chemicals

GP 2074

GP® 2074 is a phenolic novolac resin used as a curing agent for epoxy resins in molding compounds, copper clad laminates, coatings, and electrical applications.

Georgia-Pacific Chemicals

GP 2056

GP® 2056 epoxy hardener is a flake phenolic novolac resin developed by Georgia-Pacific Chemicals as a curing agent for epoxy resins in oilfield, molding compounds, coatings, copper clad laminates, and electrical applications.

NuSil Technology

NuSil™ CV-1144-0

NuSil™ CV-1144-0 is a controlled volatility RTV silicone oxygen protective coating.

allnex

EBECRYL® 1259

EBECRYL® 1259 is an acrylated aliphatic urethane oligomer diluted with 35% of hydroxyl propyl methacrylate, specifically designed for use in solder resist coatings on printed circuit boards and may be cured by ultraviolet light (UV) or electron beam (EB).

Bomar Specialties LLC

Bomar Oligomers® BR-742S

Bomar™ BR-742S is a difunctional, polyester Urethane Acrylate Oligomer that offers good weatherability. High-impact-strength coatings and inks can be formulated that are non-yellowing and have high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications.

Bomar Specialties LLC

Bomar Oligomers® BR-641E

Bomar®BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink,and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties.

Kao Chemicals

TRIMEX™ N-08

Plasticizer for synthetic resins. Heat resistant electric wires and cables, heat-resistant leathers, heat-resistant compounds. Agrochemicals

NuSil Technology

NuSil™ CV2-1148

NuSil™ CV2-1148 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 100% Solids.

Nyacol

BurnEx® Plus A1588LP

BurnEx Plus A1588LP is an acidic surface material, which will absorb metallic ions and improve the properties of insulation and encapsulation polymers by effectively tying up these ionic impurities. BurnEx Plus A1588LP contains approximately 3-4% sodium and some water of hydration. Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additives

Bomar Specialties LLC

Bomar Oligomers® BR-643

Bomar®BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-643 withstands the extremes of temperature typical of such tests,without undue degradation of properties

Bomar Specialties LLC

Bomar Oligomers® BR-744SD

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

Miller-Stephenson Chemical

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings is a non-flammable, solvent-based, one-component polyurethane conformal coating provided in the convenience of aerosol. Our coating provides excellent electrical and barrier properties in a thinfilm applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-470C will maintain its properties even after long exposure to the elements with minimal color change.

Nissan Chemical America Corporation

TEPIC® G

TEPIC® G is a unique symmetrical triazine is a tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Nissan Chemical America Corporation

TEPIC® S

TEPIC® S Tris (2,3-Epoxy propyl) Isocyanurate, is a unique symmetrical triazine contains tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Wacker Chemie AG

DEHESIVE® 982 AMA®

DEHESIVE® 982 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and applied with additional components on paper and filmic substrates.

Gelest Inc.

Gelest SIA0200.0

Gelest (3-ACRYLOXYPROPYL)TRIMETHOXYSILANE, 96% (SIA0200.0) is a comonomer for free-radical polymerization. This product functions as an adhesion promoter and coupling agent.

Wacker Chemie AG

DEHESIVE® SF 201 AMA®

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and applied with additional components on paper and filmic substrates.

The Mitsubishi Chemical Group

SHIKOH™ UV-3700B

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-1588

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3278

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3288

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.