Products in Building Wires & Power Cables

Dragonox® 1330 is used in polyolefins such as polyethylene, polypropylene, and polybutene for the stabilization of pipes, molded articles, wires, cables, dielectric films, etc. Furthermore, it is applied to other polymers, such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. This product may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates.

Arnite® T08 200 is a high-performance engineering plastic renowned for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it highly suitable for a wide range of applications in the automotive, electrical and electronics, and consumer goods sectors.

Arnitel® EL250/U is a high-performance thermoplastic copolyester (TPC) known for its exceptional attributes, including flexibility, high-temperature resistance, strength, and excellent processing characteristics. It is gaining increasing popularity as a lighter, more intelligent, and environmentally friendly substitute for conventional rubber across various industries. This transition leads to a notable reduction in environmental impact and system costs. One significant feature of Arnitel® EL250/U is its UV stabilization or weather stability, making it suitable for applications exposed to outdoor conditions. It is specially engineered for injection molding processes, ensuring efficient and precise manufacturing.

Arnitel® EL740 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries spanning automotive to E&E, it is gaining popularity as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material is processed using injection molding technology and meets food contact quality requirements.

Arnitel® EL740-08 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries spanning automotive to E&E, it is gaining popularity as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material is processed using injection molding technology and meets food contact quality requirements.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F11.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F13.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F12.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

ChlorFlam® 250 is a highly effective chlorinated flame retardant, recognizable by its white, free-flowing powder appearance. ChlorFlam® 250 finds widespread use in applications like nylon electrical connectors and polyolefins for wire and cable. Its complete chemical name is Chlorinated Paraffin.

Z-NOX® 1076 is an antioxidant mainly utilized in the electrical and electronics market segment, particularly for wire and cable applications like jacketing and insulation. It falls under both polymer additives and elastomer additives categories, functioning as an antioxidant. This product is compatible with various polymers and resins including acrylics, ABS, polycarbonates, polyethylenes, polyoxymethylene, polypropylenes, polyurethanes, PVC, and polystyrenes.

PolyJet® 502 Alumina Trihydrate is a specialized product meticulously designed for wire/cable-elastomers, coatings, and thermoset/plastic applications. Engineered with precision, it boasts a controlled particle size distribution and essential physical properties, empowering compounders to achieve elevated loading levels and superior overall performance. The enhanced surface area enables exceptional surface finish and impact characteristics, while meticulous particle distribution control allows for maximum loading levels.

SmokeShield® ZM-11 is a fine white powder, featuring an effective mixed metal smoke suppressant with a remarkable balance of flame retardancy, smoke suppression, and heat stability. This versatile complex also exhibits excellent wet electrical properties, making it a valuable choice for various applications.

127-11 is a medical electrode ink and coating suitable for application by wire coating, dipping and flexographic or gravure printing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike most readily available electrode inks, this product is able to maintain conductivity levels in contact with high salt content electrode adhesive gel. This product is designed to produce uniform smooth surfaces in thin layers and to be fast curing at low temperatures. Some uses for 127-11 include, but are not limited to, EKG and Tens electrode applications as well as other medical devices.Features Electrode ink for ECG electrodes

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

SuperOhm® 2595 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® EPMC-2 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Excelene 4990 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility.

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® EPMC-16 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.

Excelene 4980 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

SuperOhm® 3455 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Aquagraft® 16-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® EPMC-4 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Aquagraft® 1-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.