Products in Builders & Chelators

Dissolvine NA2 is a chelate used in the detergent industry as a stabilizer, in the chemical industry as a metal carrier in redox systems, in the cosmetic industry as a stabilizer for preparations, and in the printing industry to control hardness and as a stabilizer.

Alcoguard H 5941 is a readily biodegradable hybrid polymer based on natural and synthetic components for cleaning applications. Alcoguard H 5941 performs similarly to widely available synthetic petrochemicals but is based on 75% renewable resources (polysaccharides). It has a significantly lower carbon footprint (lifecycle assessment available) than traditional petrochemical based polymers. All of this makes Alcoguard H 5941 an attractive, environmentally friendly alternative to traditional polymers.

H-Quest® C 100 sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

H-Quest® B 105 sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

T-Det® PEG 20000 is a 100% active polyetheylene glycol with an average molecular weight of 20000. It can be used as a lubricant, thickener, defoaming agent, mold release agent, softener, conditioner, and as a dispersant. Additionally, PEG€™s can be used to make chemical intermediates such as fatty acid esters.

H-Quest® L 50 sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

All-Plus Chemicals AP8401G Granular MGDA is a readily biodegradable, strong complexing agent. Its performance is higher and more cost-effective. The excellent ecological and toxicological properties of All-Plus Chemicals AP8401G Granular MGDA have been tested in a wide variety of studies. Hence, it can be used as a replacement for other, less environmentally friendly complexing agents.

WeylClean® SKS-6 WB is a layered sodium disilicate, a modern water softening system that works via ion exchange processes without the formation of precipitates. It shows excellent calcium and magnesium ion elimination, especially at low water hardness conditions. It is compatible with sensitive detergent additives and has good heavy metal binding capacity.

Soltellus™ 2101S is a biodegradable, anionic polymer derived from aspartic acid. Designed with versatile benefits, it serves as a polyacrylate substitute in laundry detergent. Beyond its anti-redeposition and soil removal properties, Soltellus™ 2101S offers dissolution, ion sequestering, and antiscaling capabilities. Its performance excels in cold water and all water hardness conditions.

Nova HC 17041 is a low-viscosity macro-emulsion consisting of a high molecular weight silicone fluid, specifically designed for fabric softeners. When combined with conventional laundry products, it enhances their properties. Nova HC 17041 improves softening efficacy, increases the hydrophilicity of fabrics, and significantly enhances ironing properties. It typically appears as a milky liquid.

Soltellus™ 2101L is a biodegradable, anionic polymer derived from aspartic acid. This versatile product serves as an alternative to polyacrylate in laundry detergent. It offers multifunctional benefits, including anti-redeposition, soil removal, ion sequestering, and antiscaling properties. Soltellus™ 2101L excels in cold water and various water hardness conditions.

Texhydro® Soft is a micro-emulsion specifically formulated for home care formulations. It is engineered to impart a hydrophilic, voluminous, and silky touch to various surface types. Notably, Texhydro® Soft exhibits a high tendency to form a durable, non-reactive film. Additionally, it can be effortlessly diluted with water to achieve the desired application concentration.

Cola®Lux SO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola®Mulse CA-15 is a multifunctional amine alkoxylate used as an emulsifi er and lubricant in metalworking formulations. Cola®Mulse CA-15 may also used in textile applications for antistatic properties. The polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. Cola®Mulse CA-15 is substantive to metals, glass, textiles, plastics, and clays.

Evermild™ MGDA-30 is aminopolycarboxylate-based chelating agent which is used in countless applications to control metal ions in water-based systems, and is of highly effective for controlling water hardness ions as well as for cleaning surfaces, descaling boilers, processing textiles and preventing scale formation. Evermild™ MGDA-30 is a strong chelate for hard water and transition metal ions. Evermild™ MGDA-30 could be used as an ingredient in cleaning formulations improves the descaling and cleaning capabilities. This includes whiteness and color care benefits in laundry and stain removal abilities in automatic dish washing. Since Evermild™ MGDA-30 is also a strong chelating agent for heavy metal ions, such as Fe and Cu, it enhances product stability and prevents negative effects of transition metals.

Evermild™ GLDA-30 is aminopolycarboxylate-based chelating agent based on the food-approved natural amino acid salt, monosodium L-glutamate, which is produced by biochemical conversion of vegetable material (such as sugar beet waste). This results in a good biological breakdown as is confirmed by the Closed Bottle biodegradability test.

Evermild™ GLDA-47 is Tetrasodium Glutamate Diacetate with a concentration about 47%, it is aminopolycarboxylate-based chelating agent based on the food-approved natural amino acid salt, monosodium L-glutamate, which is produced by biochemical conversion of vegetable material (such as sugar beet waste). This results in a good biological breakdown as is confirmed by the Closed Bottle biodegradability test. Evermild™ GLDA-47 is readily biodegradable, with a high solubility over a wide pH range. It does not sensitize human skin, demonstrates enhanced biocidal boosting power and improved biodegradability properties. Compared to phosphates and phosphonates, it is a far more effective chelating agent.

Accoquat® 875-90 is a rinse cycle fabric softener concentrate available at 90% solids in IPA. It is an off-white paste at room temperature and is pumpable between 25-30°C. It is manufactured in USA.

Accoquat® 522LM-90, a ditallowamidoethyl (hydroxyethyl) ammonium methosulfate, is an economical, easy to formulate, low-temperature melting, off-white paste at 90% in isopropyl alcohol. Accoquat® 522LM-90 is dispersible in cool water. It provides excellent softening while imparting anti-static properties to fabrics. Accoquat® 522LM-90 is non-yellowing to fabric at high drying temperatures even after repeated washings. It is manufactured in USA.

SPE 0881 is a specialty phosphonate, it is an inherently biodegradable chelant from natural origin. SPE 0881 has been tested for bottle washing detergents, can be considered for other applications where a better environmental profile is needed.

Dequest® 2010LC is a key material for stabilization of oxy based formulation/materials. It prevents the degradation catalyzed by heavy metals and at the same time the low level of chloride helps preventing the corrosion of metals. Dequest® 2010LC is the optimal chelant for transition metals chelation at acidic pH.

Superior Crystal® - Water Softener Salt Pellets are pillow-shaped pieces of compressed, high purity, evaporated sodium chloride designed for regeneration of home water softening units. Under normal use, the uniform size and density of this product minimizes mushing, bridging or channeling for excellent percolation. The high purity of Superior Crystal® Water Softener Salt Pellets produces a virtually 100% soluble product. This eliminates messy tank cleaning and provides for efficient operation of the unit. The food grade additive Sodium Hexametaphosphate is added to the salt before compaction as a hardening agent to minimize pellet mushing.

KEBOPLEX 105 is a disperser for the treatment of cooling water systems. It is used as scale inhibitors and dispersants for the pulp and paper industry. It is a versatile dispersing agent with excellent stabilizing and protective colloid effects.

Crodasoft™ TZ is a ready-to-use dry end softener designed to improve the bulk softness of facial and toilet tissue products. Crodasoft TZ is particularly suitable for spray applications. Applications include tissue coatings. Functions include fibre and surface protection and tissue lotions. The product's physical form is liquid.

Vynova produces solid KOH by drying the liquid KOH that is formed during our on-site electrolysis process. We offer KOH solid in various forms and concentrations, such as 90% and 95% flakes or 85% pellets.

Adi-Pure® Adipic acid (hexanedioic acid) is a dicarboxylic acid that is predominately used in the production of nylon 6,6. Other applications include uses as a monomer for polyurethanes and polyamides, and a raw material for plasticizers, wet strength paper resins, copolymer adhesives and binders, and more.

Vynova produces solid KOH by drying the liquid KOH that is formed during our on-site electrolysis process. We offer KOH solid in various forms and concentrations, such as 90% and 95% flakes or 85% pellets.

Silwax®G118 is a solid alkylated silicone. The alkyl pendant groups make it more compatible with many organic systems. It provides gloss and softness to personal care products and can be used as a lubricant and softener in many industrial applications, such as textile and tissue paper.

KEBOPLEX 137 is a hardness stabilizer and dispersant for water with high carbonate hardness.a complexing agent for water softening and dissolving deposits. KEBOPLEX 135 can be used both to prevent stone formation and to remove and dissolve existing deposits.

DeVere Chemical Boost Detergent Plus Builder combines detergent and builder in one product for use in commercial laundry washing machines. BDB contains surfactants, emulsifiers, builders, sequestration agents and an anti-deposition ingredient for superior soil removal. BDB lifts greasy stains and neutralizes soils. BDB's whitener brightens whites and colors.

Biopure™ GLDA is a powerful chelating agent made from natural, biodegradable, renewable raw materials. It exhibits excellent metal chelation properties, high water solubility and can be used over a wide pH range.

Mosselman DTPA 5Na Liquid (140-01-2) is the aqueous solution of the pentasodium salt of diethylenetriaminepentaacetic acid.

Cirrasol™ ST Ultra is a novel through-the-wash softening additive for liquid laundry applications. With this patented liquid softening technology, formulators can easily produce clear 2-in-1 liquid laundry formulations that provide a perceivable softening benefit without affecting the performance of the detergent.