Products in Performance Additives

POLYSORB® PA is a high purity grade of isosorbide grade under pellets form (POLYSORB® PA). It offers valuable solutions to performance materials markets: polyesters, composites and coatings, polyurethanes, etc.   Key benefits Temperature resistance Optical properties Surface hardness

MultiTech Lubricant A is a water-insoluble soap of commercial stearic acid.

DiTech Impact Modifier is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*DiTech Impact Modifier is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

MultiTech Flame Retardant B is a general purpose fire retarding and smoke suppressing polymeric additive. MultiTech Flame Retardant B is bromine, antimony and hydrated mineral free.

DiTech DiFunctional D is a Low viscosity 3.5% silanol fluid. DiTech DiFunctional D Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the DiTech DiFunctional D can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts”the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech Release Agent is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

ZELEC® A081 is an alcohol phosphate that can be used to help decrease the viscosity of high-pressure compounds. It can also be used to reduce and stabilize viscosity and act as a color stabilizer in rubber. It also plays the role of a lubricant additive for plastic materials and provides antistatic properties in fiber lubricating oils. It can also be used as a spreading agent for oils and waxes and as an internal demolding agent for molding plastic and pultrusion. It is an additive that inhibits deposits of a corrosive nature during the soldering of light metals (aluminum and magnesium) and can be used in construction as a concrete additive. It is also used as a dispersing agent in ink formulations.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILFAR® 350 is a polydimethylsiloxane derived from the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 350 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

ELASTOSIL® AUX Mould Release Agent 32 is a mold release agent for LSR (liquid silicone rubber) and HTV (high-temperature vulcanizing) injection and compression molding. This product functions as an auxiliary that helps improve the demolding of tools for injection and compression molding.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILRES® BS 97 is a water-dilutable, solventless emulsion based on an alkyl silicone resin. It is primarily used for the water-repellent treatment of insulation materials. SILRES® BS 97 is particularly well-suited for the treatment of expanded mineral materials such as vermiculite, perlite, and clay. These materials are commonly used for insulation purposes, and the application of SILRES® BS 97 helps to enhance their water repellency, thereby improving their performance and durability. By treating insulation materials with SILRES® BS 97, you can enhance their ability to repel water, prevent moisture-related issues such as mold growth and deterioration, and improve their overall performance in insulation applications.

SILFAR® SE 88 is a silicone antifoam emulsion suitable for various industries such as food, pharmaceuticals, fermentation processes, and agrochemical formulations. It is specifically designed for European use as a processing aid in food production, based on E 900. It is important for the food manufacturer to ensure that only minimal traces of the product are present in the final food, as per the necessary regulations.

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

SILFOAM® SE 2660 SIMETH.EM is a medium- to high-viscosity antifoam emulsion that finds application in various industries. This silicone fluid emulsion, based on E 900, is exclusively permitted for use as a processing aid in food applications. It is crucial for food producers to ensure that only technically unavoidable traces of SILFOAM® SE 2660 SIMETH.EM are present in the final food product.

ELASTOSIL® AUX Replasticizer 4 is a ready-to-use silicone rubber additive that helps to replastify heavily crepe-hardened solid silicone rubber compounds. Depending on the degree of crepe-hardening, a dosage of 1 - 3 % is recommended. This product has a paste consistency and can easily be incorporated into ELASTOSIL® R and R Plus compounds.

SILFAR® 1000 is a polydimethylsiloxane produced through the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 1000 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

VERSALINK® 130 M is an aliphatic diamine chain extender used in the production of color- or UV-stable polyurea and polyurethane-polyurea hybrid systems. It is particularly beneficial for aliphatic systems that require color or UV-light stability. This chain extender effectively enhances the strength and hardness of the final elastomer or coating.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

Dynasylan® VTEO is a bifunctional organosilane, boasts a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. With its dual reactivity, Dynasylan® VTEO forms chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound serves as a crosslinking agent, adhesion promoter, and surface modifier, providing versatile applications.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

TEGO® Antifoam 2263 XP is an emulsion antifoam featuring organo-modified siloxanes. This versatile product falls within the category of CASE ingredients and is specifically known for its function as an anti-foaming agent. It is most commonly applied in the production of waterborne adhesives, specifically in the realm of pressure-sensitive adhesive formulations.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

SIPERNAT® 500 LS is a very finely ground silica with high surface area, low drying loss and particulary high absorbency.

Dynasylan® 6490 is a concentrate of vinyl silane (oligomeric siloxane) containing both vinyl and methoxy groups. This nearly odorless, colorless, low-viscosity liquid acts as an excellent compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

TEGO® Sorb PY 88 TQ is a zinc ricinoleate-based odor absorber that operates on the key and locker principle, specifically designed for odor control. This product is not intended to impart flavor. It finds application in the production of masterbatches and compounds, where it excels at absorbing unwanted odors.

Dynasylan® 6498 is a concentrate of vinyl silane (oligomeric siloxane) containing vinyl and ethoxy groups. This low-viscosity liquid, nearly odorless and colorless, serves as a superb compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

T-Det® PEG 6000 is a water-dispersible granule anti-caking agent for liquid detergents. With low toxicity and good lubricating properties, it is also used as a plasticizer and humectant in industrial adhesives.

T-Det® PEG 4000 F is a water-soluble polymer made from ethylene oxide. It has a wide range of applications as a humectant and viscosity modifier in the cosmetic and personal care industries, a mold release agent and lubricant in the rubber industry, and a binder and dry lubricant for pill and tablet manufacture in the pharmaceutical industry.

T-Det® PSML 20 is a nonionic surfactant with multiple applications in various industries. It functions as a wetting agent in the elastomer industry for rubber balers. In yeast and sugars, it functions as an emulsifier, dough improver, crystallization retarder, solubilizer, stabilizer, flavor dispersant, wetting agent, fruit or vegetable coating, and defoamer.

T-Det® PEG 4000 is a versatile ingredient used in cleaning, agrochemical, and CASE applications. With properties like water solubility and low toxicity, it functions as a solvent, anti-caking agent, and plasticizer.