Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers
1,645 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
POWERSIL® 310 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High LOI (Loss On Ignition), High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
11.0 - 11.0 kN/m
POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.
Wacker Chemie AG
POWERSIL® 740 Light Gray A/B
Processing Methods:
Injection Molding
End Uses:
Cable Accessories, Insulators, Wires, Cables
Features:
Outdoor Durability, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, UV Resistant, Excellent Dielectric Properties, Good Tear Strength, Fast Curing, Easier Processing, Tracking Resistant, High Elongation, Good Weather Stability
Tear Strength:
35.0 - 35.0 kN/m
POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.
Wacker Chemie AG
ELASTOSIL® LR 3074/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Radiator, Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Coolant Resistant, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® LR 3074/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3074 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4001/50 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Odorless, Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4001/50 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber demonstrate high transparency and exhibit good to very good mechanical properties. This fast-curing silicone rubber offers excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 6289 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Features:
Rapid Curing Speed, Very Good Heat Resistance, Medium Viscosity, High Performance
Tear Strength:
55.0 - 55.0 kN/m
ELASTOSIL® LR 6289 A/B is a commercial-grade two-component system that cures rapidly upon heating to a silicone rubber. It has been formulated as a moderate-viscosity, high-performance liquid rubber with good heat resistance. The cure is accomplished by simply mixing equal parts (1:1) by weight of parts A and B.
Wacker Chemie AG
ELASTOSIL® LR 3671/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Low Coefficient of Friction, Good Mechanical Properties
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3671/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.
Wacker Chemie AG
ELASTOSIL® LR 3043/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Cables
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3070/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Fast Curing, Good Mechanical Properties, Good Adhesion, Pigmentable
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® LR 3070/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3003/70 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical/Healthcare Applications, Buttons, Handles, Body Implants, Medical Devices, Diaphragms, Soft Touch Applications
Features:
Pigmentable, Long Potlife, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Food Contact Acceptable, Good Moldability, Fast Curing, High Clarity
Tear Strength:
31.0 - 31.0 kN/m
ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.
Wacker Chemie AG
ELASTOSIL® R Plus 4001/90 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Odorless, Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, High Hardness, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4001/90 MH is a one-component, high-consistency silicone rubber designed for the production of molded articles. It utilizes an addition-cure process, resulting in cured articles that possess excellent transparency, very high hardness, and favorable mechanical properties. ELASTOSIL® R Plus 4001/90 MH is a fast-curing silicone rubber that exhibits good to very good mechanical properties.
Wacker Chemie AG
SILMIX® M40 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 White is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
SILMIX® M70 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
SILMIX® M70 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M70 Gray is designed for fabricating molded articles. Additionally, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3003/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3003/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
SILPURAN® 6400/60 A/B
End Uses:
Medical/Healthcare Applications, Gaskets, Medical Devices
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Tear Resistance, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties
Tear Strength:
13.0 - 13.0 kN/m
SILPURAN® 6400/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® R Plus 4001/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Excellent Transparency Properties, Odorless, Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® R Plus 4001/70 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber exhibit high transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 3071/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Good Mechanical Properties
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3071/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3851/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Good Mold Release, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Cut Through Resistant, Enhanced Tear Resistant, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
36.0 - 36.0 kN/m
ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.
Wacker Chemie AG
ELASTOSIL® R Plus 4060/50 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Components
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, High Resilience, Fast Curing, High Elasticity, High Consistency, Low Compression Set
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® R Plus 4060/50 MH is an addition-curing, one-component high consistency silicone rubber specifically designed for molding applications. The cured articles produced using this silicone rubber demonstrate excellent elasticity and low compression set. ELASTOSIL® R Plus 4060/50 MH is well-suited for the manufacturing of molded articles.
Wacker Chemie AG
ELASTOSIL® SUB C 2000 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Marine Applications
Features:
High Durability, Room Temperature Vulcanizing, Translucent, Good Shrinkage Resistance, Flexible, Fast Curing, Low Viscosity, Pigmentable, Thermally Insulating, Low Temperature Flexibility
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® SUB C 2000 A/B is a two-component silicone rubber specifically developed for deep-sea applications. It is a pourable material that undergoes addition curing. This silicone rubber exhibits flexibility at both low temperatures (-40 °C) and high temperatures (+180 °C). It has a low viscosity, making it ideal for the manufacturing of various thermal insulating devices.
Wacker Chemie AG
ELASTOSIL® LR 3842/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
SILMIX® E40 Black
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
23.625 - 23.625 kN/m
SILMIX® E40 Black is a compound used for fabricating vulcanizates with a distinctive set of characteristics. These vulcanizates are recognized for their excellent flexibility and mechanical properties. Specifically designed for the production of extruded articles, SILMIX® E40 Black enables the manufacturing of high-quality parts. Additionally, when post-cured, these parts can be safely employed in food contact applications, adhering to the recommendation "XV."
Gelest Inc.
Gelest DMS-V35
Polymer Name:
Silicone Elastomer
Gelest VINYL TERMINATED POLYDIMETHYLSILOXANE, 5,000 cSt (DMS-V35) is employed in two-part addition cure silicone elastomers. This product is recommended for use as a chemical intermediate in the chemical industry.
Gelest Inc.
Gelest DMS-V31
Polymer Name:
Silicone Elastomer
Gelest VINYL TERMINATED POLYDIMETHYLSILOXANE, 1,000 cSt (DMS-V31) is useful as a reproductive molding compound. It can be used to prepare formulations without the need for specialized equipment and serves as a useful starting point for additional curing silicone elastomers. This product is recommended for use as a chemical intermediate in the chemical industry.
Wacker Chemie AG
ELASTOSIL® R 401/60 KX
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Profiles, Battery Cable, Control Cables, Tubes, Tubing, Exhaust Duct Systems, Cables, Ignition Cables
Features:
High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Good Mechanical Properties
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® R 401/60 KX is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.
Wacker Chemie AG
ELASTOSIL® RT 625 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant, 2K (2 component) Coating
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 625 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for electronics reproduction molding applications. This product offers excellent mechanical properties and is flowable in nature. It is a two-component system that provides high-quality reproduction molding results.
Wacker Chemie AG
ELASTOSIL® R 420/70 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Battery Cable, Tubes, Tubing, Exhaust Duct Systems, Ignition Cables, Gaskets, Vibration Dampers
Features:
High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Tear Resistance, Good Mechanical Properties
Tear Strength:
45.0 - 45.0 kN/m
ELASTOSIL® R 420/70 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.
Wacker Chemie AG
ELASTOSIL® P 7671 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
Wacker Chemie AG
SILPURAN® 2400/25 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Prosthetics
Features:
Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing
Tear Strength:
1.7 - 1.7 kN/m
SILPURAN® 2400/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a translucent silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400/25 A/B can be used for flexible molding applications in prosthetics. Components A and B of SILPURAN® 2400/25 A/B are delivered ready to use in drums.
Wacker Chemie AG
ELASTOSIL® FX Gel 30 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Orthotics, Prosthetics
Features:
Self Deaeration, Room Temperature Vulcanizing, Soft, Translucent, Bondability, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability
Tear Strength:
5.5 - 5.5 kN/m
ELASTOSIL® FX Gel 30 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. The main application of the product is in special effect applications for movies and theater productions. It is suitable for creating general prosthetic effects, life molding, body parts, wounds and scars, masks, and fat makeup.
Wacker Chemie AG
ELASTOSIL® R 701/40 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding
End Uses:
Automotive Components
Features:
Excellent mineral Oil Resistance, High Consistency, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set, Heat Stabilized
Tear Strength:
15.0 - 15.0 kN/m
ELASTOSIL® R 701/40 S is a high-consistency silicone rubber grade for compression-molded products. This compound is recommended for all kinds of seals that come into contact with mineral oils. ELASTOSIL® R 701/40 S is used especially when low compression set is crucial for achieving good seal properties. It may also be used for making high-quality silicone-rubber-covered rollers.
Wacker Chemie AG
ELASTOSIL® R 756/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Household Goods, Automotive Components
Features:
High Consistency, Tear Resistance, Low Compression Set, High Temperature Application, Food Contact Acceptable, High Elasticity, Hot Air Resistant, Heat Resistance
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® R 756/60 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.
Wacker Chemie AG
ELASTOSIL® R 510/70 S
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Ignition Cables, Wire Jacketing, Battery Cable, Wires, General Purpose, Cable Jacketing
Features:
Heat Stabilized, Heat Resistance, General Purpose, High Consistency
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.
Wacker Chemie AG
ELASTOSIL® R 401/10 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Extrusion
End Uses:
Tubes, Exhaust Duct Systems, General Purpose, Profiles
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Good Damping, Good Mold Release, Low Hardness, Heat Resistance, Good Mechanical Properties, High Flexibility, High Elongation, High Consistency
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R 401/10 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics. This product serves as a low-duro silicone rubber base suitable for extrusion and molding applications. It is also used in the manufacturing of silicone sponge articles in combination with peroxide crosslinkers.
Wacker Chemie AG
ELASTOSIL® R 750/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Tubes, Exhaust Duct Systems, Profiles
Features:
Very Good Heat Resistance, High Temperature Application, High Temperature Resistance, Heat Resistance, Oxidation Resistant, High Consistency
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® R 750/60 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.
Wacker Chemie AG
ELASTOSIL® R 750/50 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Tubes, Exhaust Duct Systems, Profiles
Features:
Very Good Heat Resistance, High Temperature Application, High Temperature Resistance, Heat Resistance, Oxidation Resistant, High Consistency
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® R 750/50 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.
Wacker Chemie AG
ELASTOSIL® R 500/50 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
General Purpose
Features:
General Purpose, High Consistency, Heat Stabilized
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 500/50 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
Show
36
of 1,645 results
Go to page
1
2
3
4
5
6
7
8
9
10