Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
- General purpose
- Heat resistant
Applications & Uses
- Markets
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Cables for Household Appliances
- Ignition & Battery Cables
- Measurement & Control Cables
- Application Details
- ELASTOSIL® R 510/70 S is crosslinked with 1.8 % crosslinker E [Bis(2.4-dichlorobenzoyl)peroxide, 50 %] at T > 135 °C or with 1.2 % Curing Agent C6 [2.5 Bis(t-butylperoxy)-2.5 dimethylhexane, 45 %] at T > 165 °C.
- The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.
Properties
- Cured Properties
- Properties
This product can be used within a temperature range of - 55 °C to + 225 °C. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.
- Note
Cure conditions: 1.8 % ELASTOSIL® AUX Crosslinker E (50% paste of bis-(2,4-dichlorobenzoyl)-peroxide in silicone fluid); 10 min / 135°C in press.
Value | Units | Test Method / Conditions | |
Compression Set (Curing Agent E, at 22 hours, 175°C) | 48 | % | DIN ISO 815-1 type B method A |
Density (Curing Agent E) | 1.21 | g/cm³ | DIN EN ISO 1183-1 A |
Dielectric Strength (Curing Agent E) | 24 | kV/mm | IEC 60243-1 |
Dissipation Factor (tan δ, at 50Hz) | 50 x 10⁻⁴ | — | IEC 62631-2-1 |
Elongation (at break, Curing Agent E) | 340 | % | ISO 37 Type 1 |
Permittivity (at 50Hz, Curing Agent E) | 2.9 | — | IEC 62631-2-1 |
Shore Hardness A (Curing Agent E) | 70 | — | DIN ISO 48-4 |
Tear Strength (Curing Agent E) | 21 | N/mm | ASTM D 624 B |
Tensile Strength (Curing Agent E) | 9.4 | N/mm² | ISO 37 Type 1 |
Volume Resistivity | 10¹⁵ | Ohm-cm | IEC 62631-3-1 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg and 540 kg cardboard packaging.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.