Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
Resistant to tracking and erosion
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cable accessories
- Insulators
- Outdoor and indoor use
- Application Details
- The A and B components are delivered ready-to-use in 20 l and 200 l drums. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold. The mixing ratio is 1 : 1.
- At room temperature, mixtures of A and B components have a pot life of at least three days.
Properties
- Color
- Physical Form
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Very easy to process
- Excellent dielectric properties
- High tear strength and high elongation
- Best suitable for outdoor applications (uv & weathering resistance, excellent hydrophobic properties)
- Note
Cure conditions: 5 min / 165 °c and post-cured for 4 h at 200 °C.
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (Shear rate 10 s⁻¹) | 425000 | mPa·s | DIN EN ISO 3219 |
| Kick-Off Temperature (A+B) | 116 | °C | — |
| Pot Life (A+B, at 23°C) | 3 | days | — |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 300 | seconds | IEC 61621 |
| Density | 1.14 | g/cm³ | DIN EN ISO 1183-1 A |
| Dielectric Strength (1mm sheet) | 23 | kV/mm | IEC 60243-1 |
| Dissipation Factor (tan δ, at 50Hz) | 4 x 10⁻³ | — | IEC 62631-2-1 |
| Elongation (at break) | 650 | % | ISO 37 Type 1 |
| Flammability | FV-0 | — | IEC 60695-11-10 |
| Limiting Oxygen Index (LOI) | 31 | % | ASTM D 2863 |
| Permittivity (at 50Hz) | 2.9 | — | IEC 62631-2-1 |
| Shore Hardness A | 40 | — | DIN ISO 48-4 |
| Tear Strength | 35 | N/mm | ASTM D 624 B |
| Tensile Strength | 9.8 | N/mm² | ISO 37 Type 1 |
| Tracking Resistance | 1A 4.5 | — | IEC 60587 |
| Volume Resistivity | 10¹⁶ | Ohm-cm | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (Component A, Shear rate 10 s⁻¹) | 500000 | mPa·s | DIN EN ISO 3219 |
| Dynamic Viscosity (Component B, Shear rate 10 s⁻¹) | 430000 | mPa·s | DIN EN ISO 3219 |
| Mix Ratio (A:B) | 1:1 | parts by weight | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability