Products in Parts, Shapes & Films

1,837 Products found in Parts, Shapes & Films

  • VESTAMID® MLT 7440 banner
    Knowde company logo
    EvonikVESTAMID® MLT 7440
    • Polymer Name:PA 12/ EVOH/ EFEP (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Ethylene Tetrafluoroethylene Copolymer)
    • Physical Form:Granules, Pellets, Tube, Solid
    • Features:Chemical Resistant, Good Thermal Stability, Fuel Resistant, Electrically Conductive, Low Extractables, Anti-Static, Good Barrier Properties, Oil Resistant, Conductive
    • Color:Black
    • Materials Features:Electrically Conductive, Chemical Resistant, Good Thermal Stability, Low Extractables, Good Barrier Properties, Fuel Resistant, Oil Resistant, Anti-Static, Conductive
    VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.
    VESTAMID® MLT 4500 banner
    Knowde company logo
    EvonikVESTAMID® MLT 4500
    • Polymer Name:PA 12/ EVOH/ PA 12 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 12)
    • Physical Form:Granules, Pellets, Tube, Solid
    • Features:Anti-Static, Good Barrier Properties, Permeation Resistant, Low Temperature Impact Resistance, Oil Resistant, Conductive, Electrically Insulating, Good Thermal Stability, Fuel Resistant
    • Color:Black
    • Materials Features:Good Thermal Stability, Good Barrier Properties, Fuel Resistant, Permeation Resistant, Low Temperature Impact Resistance, Oil Resistant, Anti-Static, Conductive, Electrically Insulating
    VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.
    Ketron® VMX PEEK banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationKetron® VMX PEEK
    • Polymer Name:Polyetheretherketone (PEEK)
    • Physical Form:Sheets
    • Features:High Tolerance, Lubricated, Good Sliding Properties
    • Color:Blue
    Ketron® VMX Food Grade PEEK, an FDA and EU compliant grade that offers extreme dimensional stability, high strength and temperature resistance, and detectability. This material is designed for use in the food processing and packaging industry, where safety and traceability are of the utmost importance. Features: FDA and EU compliant Extreme dimensional stability, high strength and temperature resistance Visual, metal, and x-ray detectable Suitable for food processing and packaging industry Benefits: Can be easily traced by conventional metal and x-ray detection systems, allowing global food processors to safely avoid costly recalls caused by foreign contamination Superior resistance to wear and corrosion make it suitable for applications such as pistons, manifolds, valves, and mixing vessels in the food processing and packaging industry High strength and temperature resistance make it suitable for demanding applications Applications: Food processing and packaging industry Pistons, manifolds, valves, and mixing vessels FDA and EU compliant food applications Ketron® VMX Food Grade PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your food processing and packaging industry applications or need a material suitable for FDA and EU compliant food applications, Ketron® VMX Food Grade PEEK is the ideal solution.
    Ketron® CM 1030HT PEK banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationKetron® CM 1030HT PEK
    • Polymer Name:Polyetheretherketone (PEEK)
    • Physical Form:Plates, Rods
    • Features:Low Moisture Absorption, Wear Resistant, Abrasion Resistant, High Tolerance, Steam Resistant, Odorless, Excellent Hydrolysis Resistance, Good Machinability, Chemical Resistant
    • Color:Black
    Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.
    Semitron® ESd 520HR PAI banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationSemitron® ESd 520HR PAI
    • Polymer Name:Polyamide-imide (PAI)
    • Physical Form:Rods, Tube, Plates
    • Features:Good Mechanical Properties, ESD Protection, High Strength, Very Good Heat Resistance, High Tolerance, Static-Dissipative, Odorless
    • Color:Black
    Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.
    Semitron® ESd 490HR PEEK banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationSemitron® ESd 490HR PEEK
    • Polymer Name:Polyetheretherketone (PEEK)
    • Physical Form:Rods, Tube, Plates
    • Features:Dimensional Stability, High Stiffness, ESD Protection, High Strength, Good Thermal Stability, High Tolerance, Static-Dissipative, Odorless, Non Sloughing
    • Color:Black
    Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.
    Semitron® ESd 500 HR PTFE banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationSemitron® ESd 500 HR PTFE
    • Polymer Name:Polytetrafluoroethylene (PTFE)
    • Physical Form:Rods, Plates
    • Features:Thermally Insulating, Dimensional Stability, Chemical Resistant, ESD Protection, Low Coefficient of Friction, Good Thermal Stability, High Tolerance, Low Friction, Static-Dissipative, Odorless
    • Color:White
    Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.
    Nylatron® 703 XL PA6 banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationNylatron® 703 XL PA6
    • Polymer Name:Polyamide 6 (PA 6)
    • Physical Form:Plates
    • Features:Bearing Grade, Wear Resistant, High Strength, High Loading Absorption Capability, Excellent Toughness, Low Thermal Expansion, High Performance, Good Electrical Properties, Good Mechanical Properties
    • Density:1110.0 - 1110.0 kg/m³
    • Tensile Modulus:2750.0 - 2750.0 MPa
    Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.
    Nylatron® 101 PA66 banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationNylatron® 101 PA66
    • Polymer Name:Polyamide 66 (PA 66)
    • Physical Form:Tube, Plates, Rods
    • Features:Food Contact Acceptable, Excellent Stiffness, Heat Stabilized, Good Mechanical Properties, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Toughness, Good Electrical Properties
    • Density:1140.0 - 1140.0 kg/m³
    • Tensile Modulus:3550.0 - 3550.0 MPa
    Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes
    Ketron® CM GF30 PEEK banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationKetron® CM GF30 PEEK
    • Polymer Name:Polyetheretherketone (PEEK)
    • Physical Form:Plates, Rods
    • Features:Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
    • Density:1590.0 - 1590.0 kg/m³
    • Tensile Modulus:5858.2 - 5858.2 MPa
    • Color:Black
    Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.
    Ertacetal® H POM-H banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationErtacetal® H POM-H
    • Polymer Name:Polyacetal Homopolymer (POM)
    • Physical Form:Plates, Rods
    • Features:High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
    • Density:1430.0 - 1430.0 kg/m³
    • Tensile Modulus:3700.0 - 3700.0 MPa
    Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
    Duratron® T4301 PAI banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationDuratron® T4301 PAI
    • Polymer Name:Polyamide-imide (PAI)
    • Physical Form:Tube, Plates, Rods
    • Features:Creep Resistant, Lubricated, Low Thermal Expansion, Low Coefficient of Friction, Wear Resistant, Improved Stick-Slip Response, High Tolerance, Odorless, Dimensional Stability, High Flexural Modulus
    • Density:1450.0 - 1450.0 kg/m³
    • Tensile Modulus:5500.0 - 5500.0 MPa
    • Color:Black
    Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.
    Fluorosint® 500 PTFE banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationFluorosint® 500 PTFE
    • Polymer Name:Polytetrafluoroethylene (PTFE)
    • Physical Form:Plates, Rods
    • Features:Good Tribological Properties, Good Mechanical Properties, Good Stability, Wear Resistant, Low Deformation Tendency, High Tolerance, Odorless, High Performance, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Service Life Extension, Non Abrasive, Low Friction
    • Density:2320.0 - 2320.0 kg/m³
    • Tensile Modulus:1750.0 - 1750.0 MPa
    • Color:Tan
    Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.
    Ketron® CM CA30 PEEK banner
    Knowde company logo
    Mitsubishi Chemical Group CorporationKetron® CM CA30 PEEK
    • Polymer Name:Polyetheretherketone (PEEK)
    • Physical Form:Plates, Rods
    • Features:Low Thermal Expansion, Good Heat Dissipation, High Impact Resistance, Good Compressive Strength, Corrosion Resistant, Wear Resistant, High Strength, High Tolerance, Odorless, Chemical Resistant, High Stiffness, Good Thermal Conductivity, Abrasion Resistant
    • Density:1420.0 - 1420.0 kg/m³
    • Tensile Modulus:9648.8 - 9648.8 MPa
    • Color:Black
    Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

    Show

    of 1,837 results

    Go to page