Suppliers in Protective Coatings

Since 1968 Duromar, Inc. has been heavily involved with erosion, corrosion and process control problems. Erosion and corrosion acting together are many times beyond the resistance capabilities of most metals and concrete. Direct experience with these problems coupled with the limited performance of available protective materials, encouraged Duromar to search for new engineering solutions through the use of “state of the art” polymeric materials. Duromar recognized early that the key to solving these erosion and corrosion problems, would be in the selection and use of 100% solids, zero VOC, polymeric materials. These new products, while outperforming conventional solvent based or hazardous polymeric coatings, would also be safe for the applicator to use, and be non-toxic to the environment. Today Duromar continues to pioneer in the field of applied polymeric technology. It offers a wide variety of zero VOC, 100% solids materials for use in a broad spectrum of industrial applications. It manufactures rebuilding, resurfacing, and specialty products for industrial maintenance; concrete repair and flooring systems; high performance linings for the severest corrosive and abrasive environments; and structural adhesives. Its production facilities and quality control procedures are continually being upgraded to provide “state of the art products” to meet today’s stringent standards for quality and performance.

"Sunnyside’s hallmark for over 125 years. Sunnyside carries a full line of thinners, solvents, paint removers, cleaners, mildew treatments and paint additives marketed under several brands including Sunnyside, ProSolutions, Green Envy, Back to Nature, M-1 and 2-Minute Remover. Sunnyside continues to improve and expanded its manufacturing facility, with significant on-going capital investment in automated equipment and high-speed filling lines. Sunnyside’s main manufacturing and distribution facility is centrally located in Wheeling Illinois. Sunnyside also has a distribution center in Southern California, facilitating timely shipments throughout the Western United States, Canada and Mexico."

Founded in 1980 and headquartered in Salisbury, NC, Aldo manufactures a comprehensive line of roof coatings including silicone, polyurethane and acrylic coatings for restoration of virtually all commercial roof systems. Aldo works closely with contractors, facility managers and consultants to make sure that restoration projects employing Aldo products result in lasting solutions. Roof restoration with Aldo roof coatings can save 50-70% compared to roof replacement in addition to providing numerous sustainability and operational benefits. Our silicone, polyurethane and acrylic coatings, extend the life of the roof for at least 10 years with the possibility of a renewal application. Products are manufactured using “Just in Time” production methods supporting quality, freshness and ease of application.

ARCOR offers high performance epoxy coatings and metal rebuilding compounds with offices in Boston and New Orleans. Our manufacturing facility in Harwich, Massachusetts provides turn-key application services and supervision/training for personnel and contractors. All ARCOR products are solvent-free and can be applied in confined spaces with rapid cure times. A plural component spray system allows for large scale projects with increased efficiency. ARCOR focuses on the most rigorous raw materials to ensure resistance to chemicals, heat, and abrasion, particularly in immersion environments.

We strive for excellence in the development of speciality products for the building envelope. We are experts in the manufacturing and marketing of Waterproofing Membranes, Sealants, Air Barriers, Recreational Surfaces, Protective Coatings and Finishes, Integral Chemical Waterproofing and Speciality Concretes. PennKote provides a unique approach to problem solving through application-specific product implementation as well as on-site technical assistance.

We market primarily to original equipment manufacturers (OEMs). Our company is founded on a research, development and testing strategy that responds quickly to the demands of customers. While PyroTech owns and markets a product line of formulated flame retardant chemicals and coatings, it is the adaptation of these flame retardant systems to the specifications of OEMs Lab scientistthat distinguishes our company. We excel in our ability to modify our product line to meet the customer's specialized needs. This feature has been enhanced repeatedly during recent years by consistent investment in laboratory facilities, providing rapid customer support on both routine problems and development projects.

Founded in 1955, M.G. Chemicals is a manufacturer and wholesaler of chemical products for the electronics industry. Our chemical products include dusters and circuit coolers, cleaner / degreasers, flux removers, contact cleaners, protective coatings, solder, epoxies, adhesives, RTV silicones, lubricants, EMI/RFI shielding coatings, thermal management products, prototyping supplies, and more. We also distribute related non-chemical products, such as wipes, swabs, brushes, desoldering braid, and copper clad boards. M.G. Chemicals has been registered to the ISO 9001 quality system since February 1996, and we are a firm believer in the ISO 9001 philosophy of producing quality products that are designed to meet the specific needs of our customers.

"Cantex Coatings Ltd.’s chemical engineer formulated what we feel to be the most durable and consistent materials in this category. Our continued Research and Development assures continued supply of quality and innovative products. Cantex Coatings is very quick to respond to our clients needs. If a custom blend of any of our products is required we are more than happy to help. Many of our clients require different viscosities of Trowel and Roller/Brush products for different applications. Our production methods allow for those requests easily. The revolutionary environmentally responsible, products are designed to give options to the already existing roofing, waterproofing, and protective coatings industry. Cantex Coatings Ltd. materials are cold applied products, unique for civil and structural waterproofing, secondary containment and many other water proofing requirements. All of Cantex Coatings Ltd. modified asphalt materials are comprised of waterborne and non-flammable liquids and contain no V.O.C.’s. With all of Cantex Coatings Ltd. modified materials being cold applied application they will not have the inherent faults of hot applied systems such as cracking and the changing of its composition to a brittle surface. When applied properly all of our materials can be used in a multitude of areas, such as secondary and primary containment, waste water treatment plants, ponds liner, landfill sites, reservoirs, acid plants, many different architectural uses and also in landscaping applications. All of our products have been engineered to assist each other to achieve a seamless monolithic membrane that will bond to most known construction materials. Cantex Coatings Ltd. has allowed contractors to expand their markets, revenues and services. The limits of application, using the traditional materials have been virtually eliminated."

"CPD Construction Products knows how important it is to work with experts who are as respected in their industry as you are in yours; experts who know how to get the job done right. We are celebrating 40 years in business providing diversified product families of over 100 products. These include polymer flooring materials, structural grouts, waterproofing and cement-based systems used in construction projects across North America and Internationally. And we like to think we’ve learned a thing or two about the construction industry. We’re fiercely proud of our products, our people, and service. Since 1978, we’ve earned a reputation as a business of integrity, quality, and service while constantly innovating and adapting. We’d like to invite you to check out some of those innovations on our product pages on our website or contact us to discover for yourself how we can partner with you to help meet and exceed the needs of your expanding customer base. You deserve to work with people who care about your business like it’s their own, a construction partner who treats you like an actual partner. We actively seek clients who are as motivated as we are to complete their construction projects with quality chemical products. Whatever your needs for a specific project are, we will have the solutions that meet or exceed the most demanding architectural and engineering specifications for toughness, strength, and durability. "

PPG: WE PROTECT AND BEAUTIFY THE WORLDâ„¢ At PPG (NYSE:PPG), we work every day to develop and deliver the paints, coatings and materials that our customers have trusted for more than 130 years. Through dedication and creativity, we solve our customers biggest challenges, collaborating closely to find the right path forward. With headquarters in Pittsburgh, we operate and innovate in more than 70 countries and reported net sales of $14.3 billion in 2016. We serve customers in construction, consumer products, industrial and transportation markets and aftermarkets. To learn more, visit www.ppg.com and follow @PPG on Twitter

"Childers™ Products manufactures high-quality, proven mastics, coatings, adhesives and sealants for the Thermal Insulation and HVAC industries. Whether you need Weather Barrier Coatings for above ambient temperatures, Vapor Barriers for below ambient temperatures or Adhesives and Sealants for Thermal Insulation, Choose Childers™."

IPC is an industry leader in Electroless Nickel and Polymer coatings with over 30 years of experience. They offer high performance coatings specifically designed to last in extreme environments. IPC is ISO 9001:2000 compliant and follows strict quality standards as required by their customers. Facilities are located in Sherwood Park, Alberta, Calgary, Alberta, and Tianjin, China.

"We manufacture superior high-quality ceramic coatings and advise plant owners and maintainers world wide as they ensure maximum energy process equipment performance. When you’re in the business of protection, nothing matters more than trust. This is why we keep an unwavering commitment to quality and integrity at the core of all we do. It isn’t just about how we engineer and design our products to be better than everything else on the market; our philosophy also extends to the way we treat our customers, applicator partners and internal personnel. Edward Lloyd, President of Fireside Coatings, has been involved in designing and applying specialized coatings for biomass and utility power generation, pulp and paper, cogeneration and chemical processing industries for over 30 years. He especially enjoys providing recommendations and technical assistance to our customers. Ed has held positions in production management and executive positions as Vice President and President of several industrial applications companies during his career. He has designed and provided technical specifications for many of the protective coating systems currently being used to protect boiler tubing and other high temperature industrial process equipment worldwide. He has personally managed many application projects in Europe, South America, Asia and North America."

Chemical Products Industries, Inc. (CPI) provides proprietary high performance surfactant ingredients, formulated cleaners and degreasers for surface preparation and industrial cleaning applications as well as water repellents, oil repellents, and densifiers for new construction and routine maintenance. Additionally, we are a manufacturer of patented and proprietary sulfur removal adsorbents, scavengers and catalysts for oil, gas and air purification applications. As a Woman Owned Small Business (WOSB), CPI is committed to providing State and Federal clients economical products with outstanding performance.

The company first established its market presence as Oil Gard in February of 1976 and was co-founded by Gordon F. Hawken and his son Donald F. Hawken. Today, Donald Hawken is still President of GardGroup and all its divisions. GardGroup Inc. is Canada's leading developer and distributor of surface coatings to the automotive, marine and aviation industries since 1976. For over 45 years our proprietary products and services incorporate and maintain some of the most stringent clinical, industrial and eco environmental guidelines in today’s competitive marketplace. We continually strive to make GardGroup the world’s name for trusted product standards and service excellence.

Since the 1920s, innovators have come to Beacon Adhesives for answers to impossible problems. Crafters, designers, and engineers alike count on us-the creative adhesive company, for customized solutions in every field. From fashion accessories to aerospace technology and crafting to construction, we believe in making products so the modern maker can move forward. Keeping production local in Mount Vernon, New York, we continue inventing new adhesives, stirring up sealants, coatings, potting compounds and more. Look in any craft closet, workshop, lab or DIY space, you’ll likely find a supply of Beacon Adhesives hard at work on ideas that stick.

US Coatings is a leading provider of high-performance coatings and linings. We custom tailor our industrial coating products to fit the needs of clients across a wide variety of markets, and we pride ourselves on offering superior customer service through the duration of the job. Founded in 2000 in St. Louis, Missouri, US Coatings has emerged as a company doing business all over the country, with close connections spanning a vast number of specialty coatings markets. Despite this success, we’re committed to remaining nimble enough to be able to take on any coatings challenge, large or small. US Coatings is focused on building relationships with our customers so we’re here before, during and after the sale with personalized attention to your project that our competitors can’t match. More than just purveyors of paint, we take collaborating with our customers seriously, providing superior service throughout the course of your job.

"Nycote® Laboratories Corporation is the only global advanced surface-coating manufacturer that can deliver unrivaled anti-corrosion protection technology for mission-critical systems to the aerospace, automotive, and railway industries, among others. Through a multi-block copolymerization process, Nycote produces clear, chrome-free, lightweight liquid coatings with the flexibility of nylon and the strength of epoxy. These coatings offer unprecedented protection capable of withstanding severe weather conditions and harsh environments. Trusted and approved for decades by Boeing, Airbus, Embraer and other OEMs worldwide, Nycote’s optimized highly cross-linked copolymer coating creates a self-leveling, pinhole-free complex barrier against corrosion, friction and conductivity that can increase asset lifespan, enhance safety, and reduce maintenance costs. Its one-coat technology can be custom tinted and applied on a multitude of surfaces including fiberglass, carbon fiber, and fabric. Located in Los Angeles since 1959, Nycote® Laboratories Corporation is proudly owned by a United States Veteran (VOSB), as well as a highly accomplished woman (WOSB). Nycote’s advanced coating technology is manufactured to order, suitable for both OEM and MRO application, and is EU/ IATA/ REACH Compliant."

"Headquartered in Memphis, Tennessee, we are one of the leading suppliers of innovative chemical products for industrial, commercial and residential wood applications. In particular, we’re specialists in the production and sale of wood protection products, including Woodguard®, a leading choice in preservation for log home builders, dealers and owners in the U.S. Our extensive product lineup also features a wide range of sapstain control and decay prevention formulations for the sawmill industry, along with other life-extending products for utility poles, pallets, roofs, fences, as well as hardwoods for furniture, flooring, cabinetry and millwork. You’ll find our full line of wood protection products at work throughout the U.S. and Canada, as well as in New Zealand and South America."

"Broadview Technologies is a U.S. based chemical supply company in Newark, New Jersey established in 1970. Broadview is a leader in material science, providing innovative solutions to performance problems. We provide superior customer service and cater to the individual needs of our customers. We are committed to quality, safety, and environmental care. During the 1960’s Broadview Technologies’ affiliate ACI (Anhydrides and Chemicals, Inc) pioneered intumescent fireproof technology with the introduction of Para-nitroanaline ortho-sulfonic acid ammonium salt, code-named NASA Salt. This was a key component in heat/fire protection during the early days of space exploration."

Greenmaker Industries has a full line of EIFS/ CI & Stucco materials and products that are designed to enhance your buildings appearance and durability. Our superior quality and premiere warranties surpass industry standards. Greenmaker Industries also serves both commercial and residential customers offering a comprehensive inventory of construction materials. From drywall, insulation, acoustical tile, to sheetrock – we carry it all.

ProCoat® started with a dream over 30 years ago. A dream to grow a family-owned and -operated business that has since become a sustainable force and a top brand in the USA that is also expanding into other countries. Our roots and values have allowed us to incorporate real customer feedback in our manufacturing, and innovate the market with new product solutions that are eco-friendly, low-odor, and of course, American made. Though we have grown, we maintain relationships with our contractors and know many by name. We pride ourselves in first hand customer service, our customers know that when they call, we provide answers they can bank on. We are committed to continual innovation and diversification of our products so we can be flexible to inevitable shifts and market changes. Our long-term goal is to continue making outstanding American products. Though we have grown, we maintain relationships with our contractors and know many by name. We pride ourselves in first hand customer service, our customers know that when they call, we provide answers they can bank on.

"Our corporate strategy is to build upon our established brand equity and proven industry expertise. We aim to better serve our customers through the expansion of our product portfolios and engineered solutions across multiple market segments. The VersaFlex Family of Companies brings together the power of several industry leading brands: VersaFlex, SPI, Milamar Coatings, Raven Lining Systems and Vanberg Specialized Coatings. We provide our customers with the “Best of the Best” products and solutions including protective linings, foams, concrete repair and equipment. We provide Innovative Solutions to meet our customers Toughest Challenges. We provide Protective Coatings, Sealants, Containment solutions, Water Proofing, Geo-Stabilization foams, and Insulating products. Our combined team has been in business for over 46 years serving the Food & Beverage, Oil & Gas, Industrial, Transportation Infrastructure, Water & Wastewater, OEM, Agricultural, Power, and Construction Market Segments."

"Dynesic Technologies’ official beginning was early in 2005, although it’s initial onset stemmed from multiple experiences in advanced sealants, adhesives & coatings in multiple industries. Jim Chafin, the companies’ founder contacted Scott Phillips, co-owner and President about the opportunities they could build on and Dynesic was established. The partners are childhood friends in Dallas, Texas which provided the company with trust and compatibility in it’s early stages and increased as Dynesic’s opportunities advanced. The conceptual idea in the beginning was to develop products in the HVAC industry with the understanding that there were no reasonable products that could be ideal, permanent repairs to leaking and corroded surfaces in HVAC. As Dynesic continued to develop, they increased product offerings in the HVAC industry and develops products designed to permanently seal leaks and prevent corrosion in many industries. Today Dynesic continues to produce advanced products that are widely used in surface preparation and application that share attributions important to the company and it’s customers. Dynesic products share the unmatched characteristics in that they contain NO VOC’s, have very minimal odor, offer long-term protection, excellent chemical resistance and have the highest adhesion strength. Dynesic credits their valued distributors, retail stores and contractors for their growth. The quickness and ease of applications, give Dynesic products a big advantage, but continues to grow due to the result of their customers’ loyalty and positive outcomes."

Ecology Roof Systems has extensive experience in designing cost-effective, long-term solutions to commercial roof problems. With our thorough, step-by-step program, you can be sure you're getting the best, most comprehensive roof care system available.

Welcome to Titan Coatings, your manufacturer of high quality coatings for the protection of metal surfaces. Specializing in the coil coating, aluminum extrusion, and transportation markets, we create innovative products in our state-of-the-art facility, where rigorous testing ensures only the highest quality products. But that’s only the beginning of what we do. Because at the end of the day, we’re about more than coatings. We’re a business that goes back five generations. We’re a family that extends beyond our own. And, most importantly, we’re your provider of coatings whose quality is only matched by the level of service we provide. Whether it’s in our products or with our clients, at Titan Coatings, you’ll always find good chemistry. Explore our site, our products, and our way of doing business. Then give us a call or stop by. Welcome to Titan Coatings.

Design Polymerics began manufacturing sealants, adhesives, insulation mastics and indoor air quality products in 1985. Design Polymerics manufactures products for several major industries ie HVAC, Insulation, Indoor Air Quality, Commercial. Through commitment to providing sustainable high quality products and great customer service, Design Polymerics has grown steadily over the years. With a diversified business strategy, we are aggressively looking at new technology to solve industrial problems and to expand market share. Design Polymerics is devoted to providing innovative quality products supported by strong customer and technical service. Design Polymerics is dedicated to servicing our customers by developing, producing and delivering premium products. We are a technology driven company committed to supporting our customers. Our professional staff are your personal link with Design Polymerics. Our highly trained representatives are available, accessible and able to assist customers whenever and wherever the need arises.

The Sansin Corporation is a leading global provider of environmentally-friendly wood protection products, specializing in high-performance water-borne finishes. They are dedicated to creating the most beautiful finishes for wood surfaces.

Rust Bullet, LLC is a coatings manufacturer specializing in rust inhibitive and corrosion control coatings. Rust Bullet, LLC began operations in Reno, Nevada in 2001, conducting intensive research, testing and certifications culminating in Rust Bullet Products reaching the consumer markets in 2003. Rust Bullet Products have been specified as the designated coatings product by U.S. Federal Agencies for application on a wide variety of projects, including naval battleships and guided missile cruisers, security screening and armored vehicles, communication towers, bridges, commercial building roofing and concrete flooring. As a Small Business, Rust Bullet has qualified as a GSA Multiple Award Schedule Contractor for the United States Government.

"Founded in 1980, KECO Engineered Coatings, Inc. is a nationally recognized industry leader specializing in developing and applying lab-tested and technically superior coatings. Our coatings increase the quality and performance of a product, while maintaining its integrity, and decrease the overall labor costs and production expense. One of 23 licensed Chemours Teflon® industrial applicators (LIAs) in the United States as well as a licensed applicator in Cerakote, KECO’s signature coating portfolio includes antimicrobial, automated powder, ceramics, dry film lube, epoxy, liquid, plasma, thermal barrier thermoplastic, and plasma. KECO’s service industries include aircraft, automotive, CPI, food processing, HVAC, lighting, OEM, packaging, pharmaceutical, semiconductor, transportation, and more. We dedicate a significant amount of resources to guarantee the quality and reliability of its products. It is an integral part of KECO’s mission and substantiated through its ISO 9001:2015 certification. While we sell the service of applying coatings, we are not a distributor of coatings nor are we a blaster, as we have a number of pretreatment solutions but we do not allow our clients to use them."

30 years of experience in putting chemicals to work to waterproof, repair, protect concrete, wood, fiberglass and steel surfaces. Now focusing on improving existing formulations and explore new technologies to provide the best solutions to meet the demands of our customers. Started my tenure at Polygem as Director of sales, later promoted to General Manager and in 2011 purchased Polygem, Inc. My goal is to keep Polygem positioned to provide the best products with the best service in our industry. New chemistries provide new opportunities with new challenges that will allow Polygem to continue to provide unique solutions for our customers project requirements.

Master Chemical Corporation, now Master Fluid Solutions was founded by Clyde A. Sluhan in 1951, not simply as a business for the sake of making profit, but as a company dedicated to the improvement of manufacturing productivity to benefit mankind with a higher standard of living at an ever lower cost. Clyde believed that he was put on the earth not to "pursue happiness", but to help others, and in the words of philosopher Leo Rosten, "to have it make some difference that (he) lived at all."