Electrical & Electronics

19,562 products found in Electrical & Electronics
Applications
Devices & Assemblies
Parts & Components
Wire & Cable
Other Electrical & Electronics Applications
Packaging & Assembly
Fast Response Times
With SDS
With TDS
3h Vinacom Xlpe Compound 3h Vinacom Ha-5010 product card banner

3H Vinacom

3H Vinacom XLPE compound 3H VINACOM HA-5010

Polymer Name: Crosslinked Polyethylene (XLPE / PEX)

Processing Methods: Extrusion

End Uses: Cables

Tensile Strength: 0.01911 - 0.01911 MPa

3H Vinacom XLPE compound 3H VINACOM HA-5010 is a silane cross-linkable polyethylene compound for low voltage electrical wire and cable insulation. Both the grafting and wire coating process are performed in one single step in the usual wire and cable production extruder for polyethylene and cross-linking takes place through a reaction involving water vapor after being extruded. Difficulty in maintaining dimensional accuracy during cross-linking is avoided because the temperature of cross-linking is below the crystalline melting point of the polymer. Therefore, 3H VINACOM XLPE HA-5010 allow cross-linked polyethylene wire and cable without the need for much capital in special equipment like peroxide or radiation cross-linking.

Tarnoform® 300 Gb2 product card banner

Grupa Azoty S.A

Tarnoform® 300 GB2

Flexural Modulus: 2700.0 - 2700.0 MPa

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Vatan Plastik San. Tic. As V150 product card banner

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V150

Function: Plasticizer

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Pentamid™ A L10 H Black product card banner

PENTAC Polymer GmbH

Pentamid™ A L10 H black

Applications: Terminal Blocks, Plugs & Sockets, Parts & Components

Product Families: Polyamides, Engineering & Specialty Polymers

Chemical Family: Polyamides

Polymer Name: Polyamide 66 (PA 66)

End Uses: Plugs

Pentamid A L10 H black is a normal viscosity, impact modified, heat stabilized polyamide 66.

Multilon® Tn-7500 product card banner

Teijin Limited

Multilon® TN-7500

Density: 1180.0 - 1180.0 kg/m³

Flexural Modulus: 2600.0 - 2600.0 MPa

PC/ABS polymer alloy, Non-halogen type flame resistant series

Torelina® A673m product card banner

Toray

Torelina® A673M

Flexural Modulus: 10000.0 - 10000.0 MPa

Toray Torelina® A673M is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Accura® Ceramax product card banner

3D Systems

Accura® CeraMAX

Tensile Strength: 78.0 - 87.0 MPa

Accura® CeraMAX is a a rigid ceramic-reinforced composite with excellent thermal, moisture and abrasion resistance.applications heat and wear resistant components stiff/rigid assemblies and prototypes composite ceramic-like components esthetic components for art and archival models moisture stable components automotive and aerospace applications a plastic-ceramic composite high thermal resistance excellent abrasion resistance moisture resistant extremely rigid benefits esthetically beautiful white parts withstand temperatures of up to 220°C models that can withstand wear in aggressive applications components can survive in adverse thermal environments components can be plated parts retain properties & dimensions for extended durations.

Idemitsu Ps Ht50 product card banner

Idemitsu PS

Idemitsu PS HT50

Melt Flow Index: 3.5 - 3.5 g/10 min

Idemitsu PS HT50 is high impact polystyrene that is easy for mold ability, size stability and recyclability. High impact polystyrene feature high impact strength and with different characteristics that suit for various type of application. These grades have a good balance of flow rates and flexural modulus features.

Utec® 4040 product card banner

Braskem North America

UTEC® 4040

Applications: Pipes & Plumbing, Automotive Electronics, Pipes & Hoses

Product Families: Polyolefins, Basic Thermoplastics

Chemical Family: Polyolefins, Polyethylenes

Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)

End Uses: Pipes, Filters

Braskem North America UTEC®4040 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction what makes it a self-lubricating material.

Vynova™ S6030 product card banner

VYNOVA

VYNOVA™ S6030

Applications: Food & Beverage Packaging, Healthcare Packaging, Other Packaging Materials

Product Families: Vinyl Polymers, Basic Thermoplastics

Chemical Family: Vinyls, Vinylics & Vinyl Derivatives

Polymer Name: Polyvinyl Chloride (PVC)

End Uses: Flexible Packaging, Rigid Films, Medical Packaging

VYNOVA™ S6030 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.

Metablen™ S 2030 product card banner

The Mitsubishi Chemical Group

METABLEN™ S 2030

Function: Impact Modifier

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Metablen™ A 3000 product card banner

The Mitsubishi Chemical Group

METABLEN™ A 3000

Function: Processing Aid

Synonyms: Fluon, Perfluoroethylene polymer, Poly(ethylene tetrafluoride), Polyperfluoroethylene, Polytetrafluoroethene, Polytetrafluoroethylene, PTFE, Teflon, Tetrafluoroethene homopolymer, Tetrafluoroethene polymer, Tetrafluoroethylene homopolymer, Tetrafluoroethylene polymer, Tetrafluoroethylene resin

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Sasol Mp45 product card banner

Sasol

Sasol MP45

Chemical Name: p-cresol, m-cresol

Chemical Family: Cresolic Compounds, Phenols & Phenolics, Phenols

Meta Para Cresol (85-91% max). It is used for wire enamel solvents, resins, feedstock for the production of meta-cresol and other chemical intermediates. The product is also called MP-Cresol 45. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Kalrez® 9600 product card banner

DuPont

Kalrez® 9600

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Erosion Resistance, Low Compression Set, Good Thermal Stability, Low Outgassing, Good Seal Force Retention

End Uses: Semiconductor Applications, Pump Parts

Color: Green

Kalrez® 9600 perfluoroelastomer parts are designed for high purity, high temperature vacuum applications where seals are exposed to damaging Fluorine and Oxygen plasma radicals. In addition to its extremely low erosion rate and weight loss from plasma attack, this well balanced material provides excellent chemical resistance to Ammonia, Ozone, and Water Vapor. Its outstanding resilience in compression and ultra-low outgassing at high temperature conditions makes it especially suitable for applications where purity of the process environment is paramount, such as Plasma-Enhanced Atomic Layer Deposition and Chemical Vapor Deposition processes used in fabricating next generation semiconductor chips. A maximum application temperature of 315°C is suggested. Ultrapure cleaning and packaging are standard for all Kalrez® 9600 parts._x005F

Vespel® Scp-5050 product card banner

DuPont

Vespel® SCP-5050

Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)

Physical Form: Rods, Bars

Features: High Temperature Strength, Impact Resistance, Wear Resistant, Durable

End Uses: Semiconductor Applications, Pump Parts

A shroud is a segmented ring with holes drilled radially outward for variable vane stems used inside a jet engine compressor. Some are split.

Kalrez® 8085 product card banner

DuPont

Kalrez® 8085

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Mechanical Properties, Excellent Resistance To Plasma Radicals, Long Seal Life

End Uses: Semiconductor Applications, Pump Parts

Color: Beige

Kalrez® 8085 perfluoroelastomer parts are a beige, general purpose product for select etch, ash/strip and deposition processes. It has been formulated for minimal particle generation in NF3 plasma. Kalrez® 8085 exhibits very low particle generation and low weight loss in oxygen and fluorine-based plasmas, has excellent mechanical strength and is well-suited for both static and dynamic sealing applications (e.g., bonded slit valve doors, bonded gate valves, bonded pendulum valves, gas orifice seals, gas feedthrough seals, chamber lid seals, etc.) A maximum continuous service temperature of 240 °C is suggested. Kalrez® 8085 can also withstand short-term excursions to 275 °C. Ultrapure post-cleaning and packaging is standard for all Kalrez® 8085 parts.

Vespel® Sp-2515 product card banner

DuPont

Vespel® SP-2515

Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)

Physical Form: Seals

Features: Low Friction, Good Thermal Stability, Dimensional Stability, Low Energy Consumption

End Uses: Semiconductor Applications, Bushings, Washer

Parts made from Vespel® SP-2515 offer a low coefficient of thermal expansion (CTE), excellent wear against both aluminum and steel alloys, and a low coefficient of friction in both dry and lubricated conditions. These properties make Vespel® SP-2515 parts ideal for applications such as seal rings, thrust washers, and bushings where high energy efficiency and dimensional stability, over a broad range of temperatures, are a requirement.

Kalrez® Spectrum™ 7275 product card banner

DuPont

Kalrez® Spectrum™ 7275

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Brown

Kalrez® Spectrum™ 7275 parts are a light brown product based on a proprietary crosslinking system targeted specifically for the chemical processing industry. It exhibits minimal swelling and improved retention of physical properties when exposed to aggressive chemicals, e.g., concentrated nitric acid, organosilanes, chlorosiloxanes, pure ethylene oxide, butyraldehyde, amines and vinyl and acrylic monomers. It also has excellent compression set resistance and good retention of physical properties after aging at high temperatures. A maximum service temperature of 300°C is suggested.

Elix™ Abs 158i product card banner

ELIX Polymers, S.L.

Elix™ ABS 158I

Applications: Other Parts & Components, Other Automotive Applications, Other Consumer Goods Applications

Product Families: Styrenics, Basic Thermoplastics

Chemical Family: Acrylonitrile Butadiene Styrene (ABS), Styrenics

Polymer Name: Acrylonitrile Butadiene Styrene (ABS)

High rubber content Acrylonitrile Butadiene Styrene modifier used to improve toughness of engineering thermoplastics & PVC. Typical applications: Provides superior impact strength performance at room & low temperature for blends containing Polycarbonate, Polyesters (PBT, PET) and copolymer SAN. Highly effective modifier for improving impact strength, elongation at break and process ability for opaque PVC compounds used for indoor profiles, semi-rigid sheets, decorative films, molded parts. Useful additive to improve mechanical properties of recycle ABS, SAN and ABS+PC.

Andisil® 78 Silane product card banner

AB Specialty Silicones

Andisil® 78 Silane

Function: Coupling Agent, Adhesion Promoter

Synonyms: (3-Glycidyloxy)propyldiethoxymethylsilane, [3-(Glycidyloxy)propyl]methyldiethoxysilane, 2-[[3-(Diethoxymethylsilyl)propoxy]methyl]oxirane, 3-(Glycidoxy)propyldiethoxymethylsilane, 3-(Glycidoxypropyl)methyldiethoxysilane, 3-(Methyldiethoxysilyl)propyl glycidyl ether, 3-GPMDES, Diethoxy-3-glycidoxypropylmethylsilane, Diethoxy[3-(glycidyloxy)propyl]methylsilane, NSC 252159, γ-Glycidoxypropylmethyldiethoxsilane, γ-Glycidoxypropylmethyldiethoxysilane, γ-Glycidyloxypropylmethyldiethoxysilane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Vamplen™ 2528 V0 Cb product card banner

Vamp Tech

Vamplen™ 2528 V0 CB

Applications: Appliances & Electronics, Optical Fiber & Telecom, Connectors

Product Families: Polyolefins, Basic Thermoplastics

Chemical Family: Polypropylenes (PP), Polyolefins

Polymer Name: Polypropylene (unspecified)

End Uses: Appliances, Telecommunications, Connectors

UL 94 V0, 25% glass fiber reinforced, chemically bonded, halogen free, high rigidity and thermal resistance, RoHS.

Okamoto Glass Co. Ltd. Og461 product card banner

Okamoto Glass Co. Ltd.

Okamoto Glass Co. Ltd. OG461

Function: Curing Agent

OG461 is a curing agent which find its applications in screenprinting where a good thermal resistance is required.

Armidan® Nt7510 product card banner

SACO AEI Polymers

ARMIDAN® NT7510

Polymer Name: Polyolefin Elastomer

Features: Excellent Impact Modifier

Density: 870.0 - 870.0 kg/m³

ARMIDAN® NT7510 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

Precision Polymer™ N73b product card banner

Precision Polymer Engineering

Precision Polymer™ N73B

Applications: Equipment & Parts, Pipes & Hoses, Cooling & Climate

Product Families: Nitrile Rubbers, Specialty Elastomers

Chemical Family: Nitrile Rubbers

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

End Uses: Valve Parts, Valves, Pump Parts

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

Tufel™ Iii 92506 product card banner

Momentive Performance Materials

Tufel™ III 92506

Applications: Surgical Instruments & Trays, Medical Devices & Assemblies, Equipment & Parts

Product Families: Silicone Elastomers, Specialty Elastomers

Chemical Family: Silicones

Polymer Name: Silicone Elastomer

End Uses: Surgical Instruments, Medical Devices, Valve Parts

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Kopel® Kp3339um product card banner

Kolon Industries

Kopel® KP3339UM

Density: 1120.0 - 1120.0 kg/m³

Flexural Modulus: 59.0 - 59.0 MPa

Kolon Industries Kopel® KP3339UM is a Thermoplastic Copolyester Elastomer (TPC-ET) product. It can be processed by extrusion or injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics includes flame rated and RoHS compliant.

Ethacure® 100 product card banner

Albemarle Corp

Ethacure® 100

Function: Curing Agent, Chain Extender, Hardener

Ethacure® 100 is an effective curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.

Nusil™ Med-6755 product card banner

NuSil Technology

NuSil™ MED-6755

Applications: Medical Devices & Assemblies, Adhesives & Sealants, Appliances & Electronics

Product Families: Encapsulants, Adhesives & Sealants

Chemical Family: Silicones

End Uses: Drug Delivery Pens

NuSil™ MED-6755 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: 1.46 R.I., OPTICALLY CLEAR.

Nusil™ Med-4044 product card banner

NuSil Technology

NuSil™ MED-4044

Applications: Medical Devices & Assemblies, Adhesives & Sealants, Appliances & Electronics

Product Families: Encapsulants, Adhesives & Sealants

Chemical Family: Silicones

End Uses: Drug Delivery Pens

NuSil™ MED-4044 is a low viscosity silicone elastomer.

Hax™ Hfc 0115/1 product card banner

Fainplast Compounds

Hax™ HFC 0115/1

Density: 1900.0 - 1900.0 kg/m³

Melt Flow Index: 82.0 - 92.0 g/10 min

Fainplast Compounds Hax™ HFC 0115/1 is a Polyolefin product. It is available in Africa & Middle East, Europe, Latin America, or North America. Typical application includes Wire & Cable. Characteristics includesFlame Retardant and Halogen Free.

Keballoy® 3d Fe 170302 Pp product card banner

BARLOG plastics GmbH

Keballoy® 3D FE 170302 PP

Applications: Glazing & Window Elements, Medical Devices & Assemblies, Consumer Electronics

Product Families: Polyolefins, Basic Thermoplastics

Chemical Family: Polypropylenes (PP), Polyolefins

Polymer Name: Polypropylene (unspecified)

End Uses: Appliances, Lawn Equipment, Garden Equipment

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

Bondyram® 4108 product card banner

Polyram Group

BONDYRAM® 4108

Function: Adhesion Promoter

Polyram Group BONDYRAM® 4108 is a maleic anhydride modified linear low density polyethylene recommended as coupling agent for pe composites filled with high filler content for halogen fee flame retarded cables composites.

Nilamid® A3 Gf30 Tf15 product card banner

Nilit

Nilamid® A3 GF30 TF15

Applications: Equipment & Parts, Housewares, Other Electrical & Electronics Applications

Product Families: Polyamides, Engineering & Specialty Polymers

Chemical Family: Polyamides

Polymer Name: Polyamide 66 (PA 66)

End Uses: Kitchenware, Industrial Applications, Electrical/Electronic Applications

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Kibisan® Pn-107 L125 Fg product card banner

Chi Mei Corporation

Kibisan® PN-107 L125 FG

Applications: Food & Beverage Packaging, Industrial & Transport Packaging, Batteries

Product Families: Styrenics, Basic Thermoplastics

Chemical Family: Styrenics

Polymer Name: Styrene Acrylonitrile Copolymer (SAN)

End Uses: Containers, Battery Cases, Reflectors

Kibisan® PN-107 L125 FG has high clarity.

Trirex® Compound Gs3025g20 product card banner

Samyang Corporation

TRIREX® Compound GS3025G20

Applications: Consumer Electronics, Automotive Lighting, Exterior & Body

Product Families: Polycarbonates, Engineering & Specialty Polymers

Chemical Family: Polycarbonate (PC)

Polymer Name: Polycarbonate (PC)

End Uses: Bezels, Headlight Cover, Electrical/Electronic Applications

TRIREX® Compound GS3025G20 is a Polycarbonate (PC) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Lim™ 6050-d2 product card banner

Momentive Performance Materials

LIM™ 6050-D2

Applications: Tubing & Fluids Handling, Surgical Instruments & Trays, Medical Devices & Assemblies

Product Families: Silicone Elastomers, Specialty Elastomers

Chemical Family: Silicones

Polymer Name: Liquid Silicone Rubber (LSR)

End Uses: Tubing, Surgical Instruments, Medical Devices

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.