Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Tacky
- pressure sensitive.
- Electrically insulating.
- Non curing.
- Film adhesive.
- Component attach.
- Heat sink attach.
- Substrate attach.
Applications & Uses
- Applications
- Application Area
- Application Procedures
- Cut or pre-cut to desired size.
- Remove one side of release paper from adhesive.
- Place on substrate or component with rolling finger pressure, then remove the other release paper.
- Place component on substrate with insertion pressure of 15 psi or more.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Electrical Resistivity (at 25°C, 1minute) | min. 1x10¹⁴ | Ω-cm | — |
| Dielectric Strength | min. 750 | Volts/mil | — |
| Glass Transition Temperature | -60.5 to -49.5 | °C | — |
| Lap Shear Strength | min. 0.69 | N/mm² | — |
| Device Push Off Strength | 1.26 - 1.54 | N/mm² | — |
| Hardness | 36 - 44 | Shore A | — |
| Cured Density | 1.98 - 2.42 | g/cc | — |
| Thermal Conductivity | 1.53 - 1.87 | W/m-°C | — |
| Coefficeint of Linear Thermal Expansion | 93.5 - 126.5 | ppm/°C | — |
| Maximum Continuous Operation Temperature | max. 150 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Product Availability
- TP7205 is available in sheet sizes or as custom preforms.
- Standard thicknesses are 0.004" and 0.006".
- Special thicknesses are available.
- TP7205 can be obtained in liquid form (LTP7205).
- This film is fiber glass reinforced.
Storage & Handling
- Shelf Life
- 1 Year (at 25°C)
- Storage Information
Storage temperature: 25°C in sealed package.