Products

TP7209 is a low bond strength thermoplastic film adhesive. It is designed for bonding heat-sink, component, and substrate. This unique diamond flled material has excellent thermal conductivity and is tacky at room temperature.

Tack-film TK7758 is a reworkable, aluminum nitride-filled, electrically insulating epoxy film adhesive. It is designed for bonding die, component and substrate to a mismatched substrate or carrier. This B-Staged conductive adhesive offers excellent reworkability at 80-150°C and is storable at-40°C for one year. TK7758 has excellent thermal conductivity. Its low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing

EG8050 is an electrically conductive, silver filled epoxy which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). Post bake at 100°c or 125°c for 24 hrs using a vacuum or air flow oven is recommended in order to pass NASA outgassing testing. It can be readily reworked at 80-150°C and is ideal for applications such as large area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE.

MC8880 is a one part, silver-filled cyanate ester adhesive that is electrically and thermally conductive. It is designed for use in both chip and component level attach application to reduce stress. It can withstand temperatures up to 300°C without thermal degradation. Its unique chemistry results in very low moisture absoption, high adhesive strength.

MEB650-DA is a low viscosity silver filled flexible epoxy paste. This low ionic silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It is ideal for automatic dispensing in die- attach application with fine definition. Absolutely solvent-free and diluent free composition with low ionic impurities for high reliability. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This stress free adhesive shows consistent medium bond strength up to 250°C at 200 psi.

ME8452-A is an accelerated version of ME8452 for snap-curing applications.This novel silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C and is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

EG 8050-HC is a more conductive version of EG 8050 which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked at 80-150°C and is ideal for applications such as large-area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE's.

EG8050-LV is an electrically conductive, silver filled epoxy which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked at 80-150°C and is ideal for applications such as large area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE.

TK 7759 is a reworkable, diamond-filled, tacky epoxy film adhesive. It is designed for bonding die, component and substrate to a large and mismatched substrate or carrier. Bonding may be reworked at >80°C. TK 7759 has excellent thermal conductivity. Its low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing.

EG7635 is a alumina filled, electrically insulating and thermally conductive rigid epoxy paste adhesive. While bonding at ambient temperature can be achieved overnight, elevated temperatures will accelerate curing, exponentially. EG7635 high thermal conductivity and high strength makes it excellent for bonding substrates, components and heat sinks where thermal management is critical. It has more than 15 years of proven records of providing bonding to difficult substrates. EG7635 exibits reduced bond strength at 80-100°C for easier rework.

ME8155 is a silver filled paste, reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This paste can be used for screen printing and it can be readily reworked at 80-100°C.

ME7158 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The very high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-150°C with torque or peel stress.

ESP7666-FOW is the modified boron nitride filled thermally conductive version of the high flow DAF of ESP7660-FOW. It is a high-bond strength epoxy film adhesive tor high flow when melted to easily flow over Wire-bond in stack chip die attach application. This new generation wafer level die- attach film is flexible before curing. This ESP7660-FOW is mounted onto the back of the wafer at 80-100°C, which is then diced into predetermined sizes using standard dicing tape. Depending on the different dicing tape used and with suitable releasing action such as UV or heat, the diced chip is picked and placed directly onto a lead frame or substrate. It is designed for bonding component and substrate to substrate and carrier with matched thermal coefficients of expansion. ESP7660-FOW has good thermal stability. The dry, tack-free handling of the film makes it suitable for an automated assembly.

ME 8452 is a reworkable, solvent free, pure silver filled, electrically and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C. It is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

ME7159 is a reworkable, diamond filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The ultra high thermal conductivity of this diamond filled material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-100°C.

TC8750 is a silver-filled, B-staged epoxy film adhesive. It is designed for bonding component and substrate to a mismatched substrate or carrier. Its low Tg imposes minimum thermal stress on bonded parts during thermal cycling or shock testing. It has excellent thermal conductivity and can be used for most applications at temperatures from -65 to 150°C. It is reworkable at 80-150°C. Customers must test the adhesive for their specific applications to confirm its suitability. TC8750 is designed to meet the hybrid adhesive specification MIL-STD-883; Method 5011. It exhibits low outgassing at 125°C and passes NASA Outgassing requirements.

TP 7855 is an alumina crystrallites filled, electrically insulating, medium bond strength thermoplastic film adhesive. It is designed for bonding component and substrate. TP 7855 has good thermal conductivity. The dry, tack free handling of this film makes it suitable for an automated assembly. This high purity adhesive possesses excellent moisture resistance.

ME7155 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits not only outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper), but also exhibits high level of uniformity and consistency in appearance and smoothness of texture, yielding potential ease of use and success in applications. The high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. MEZ155 can be readily reworked at 80-1502.