Products

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

BRUGGOLEN® TP-H1805 - High Heat Stabil­izer for Aliphatic Poly­amides above 200°C. It is a granular form heat stabilizer package with synergists. Powerful long-term protection of aliphatic polyamides at very high temperatures: PA6 up to 200°C, PA6.6 up to 230°C: tensile strength retention >50% for 3000 h at 200°C no activation required easy processing during compounding upgrades aliphatic polyamides to the performance range of high temperature nylons

Zinc Oxide RAC by Brüggemann is a type of active zinc oxide that is produced through a special precipitation process. It is suitable for use in the vulcanization of a variety of rubber types, including:Natural rubber (NR)Styrene-butadiene rubber (SBR)Isoprene rubber (IR)Nitrile rubber (NBR)The product has excellent vulcanization properties due to its gentle thermal treatment and chemical origin. It is known for its high specific surface area, which enables it to provide excellent mechanical properties even when used in smaller amounts compared to traditional zinc oxides. Zinc Oxide RAC has a shelf life of 12 months.

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

Bruggolite® FF6 M is the first formaldehyde-free sulfur-based reducing agent which enables adherence to stringent regulatory requirements of emulsion polymers. Recommended pH range is 4 - 8. Effective for main and post-polymerization at temperatures as low as 20°C. Advanced Formaldehyde Free Reducing Agents Formaldehyde-free reducing agents from Brüggemann enable solutions for the latest technical challenges of environmental awareness, rising quality demands, and improved application performance. Our products and techniques enable emulsion polymer producers to improve efficiency with more sustainable raw materials. All offer the following attributes: Formaldehyde and VOC free Increased reactivity – better performance at lower dosage and time Low to zero residual free monomer level Non-yellowing FDA Direct Food Contact Approval Dust-free micro granules

Bruggolite® E28 offers improved performance for emulsion polymers requiring a reducing agent applied at a pH range of 2 - 4. Advanced Formaldehyde Free Reducing Agents Formaldehyde-free reducing agents from Brüggemann enable solutions for the latest technical challenges of environmental awareness, rising quality demands, and improved application performance. Our products and techniques enable emulsion polymer producers to improve efficiency with more sustainable raw materials. All offer the following attributes: Formaldehyde and VOC free Increased reactivity – better performance at lower dosage and time Low to zero residual free monomer level Non-yellowing FDA Direct Food Contact Approval Dust-free micro granules

BRUGGOLEN® TP-H1804 is a copper-based heat stabilizer package with synergists for use in aliphatic polyamides. This product is available in granular form. It is a very effective protection agent and antioxidant against premature fatigue of the mechanical properties and embrittlement of the finished parts under long-term stress, both in unreinforced and glass-fiber reinforced or mineral-filled aliphatic polyamides up to 190°C.