Products

DeCAL 4287 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment and provide maximum color development properties at these loadings. It is the same polymer as DeCAL 4286 but is supplied as the monoethanolamine salt for use in formulations where slower drying or better resolubility is required.

AFCONA 2505 is a water-based defoamer and anti-foam, especially designed for micro foams. It is an organically modified polysiloxane, providing good defoaming and anti-foaming properties in all water-based coatings. It offers excellent performance against micro foam, even in high shear applications such as long period grinding. It maintains its good defoaming and anti-foam performance under high shear conditions.

DeCAL 4201 is an acrylic binder ideally suited for use in water-based flexographic inks. The product exists as an alkali-soluble carboxylated copolymer emulsion but can also be supplied in its neutralized varnish form as DeCAL 4202. Inks prepared using DeCAL 4201 possess excellent machine stability/resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics.

AFCONA 2027 is a moderate defoamer with minimal side effects. AFCONA 2027 prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by spray and brush.

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

DeCAL 4202 is an acrylic binder ideally suited for use in water-based flexographic inks for paper and corrugated board. It possesses excellent machine stability and resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics. It is supplied in its neutralized varnish form.

Dar-Tech Hauthane HD-4638 DMM is a soft, NMP-free, APEO-free, aliphatic, waterborne polyurethane dispersion. It was designed for use in textile applications as a versatile polyurethane coating. This product is ideally suited for use as an anti-fray finish on textile fabrics that must have a soft hand. HD-4638 DMM is also suitable for textile coating applications that require excellent low-temperature flexibility and crack resistance.

AFCONA 2503 is a waterbased defoamer and anti-foam agent with leveling properties that is especially useful in high shear applications such as pigment concentrates. AFCONA 2503 is an organically modified polysiloxane which is designed to give good defoaming, anti-foam and leveling performance in all waterbased applications.

AFCONA 2501 is a defoamer for water-based paint. It is a silicone-based defoamer containing a small amount of silicone to give better deaeration. It is recommended for all kinds of water-based coatings ranging from decorative paints to water-based printing inks.

DeCAL 4286 is a low molecular weight carboxylated acrylic copolymer with the capacity to carry very high levels of pigment and to provide maximum color development properties at these loadings. To obtain the full benefits of DeCAL 4286, it is essential to use the highest possible pigment binder ratios and the highest possible pigment loading.

DCL 5154 Phthalocyanine Blue, PB.15:4 is a beta-type, non-crystallizing, non-flocculating green-shade phthalocyanine blue, recommended for various coatings and printing ink applications. It is FDA-approved (Section 178.3297) and is recommended for use in various industrial paint applications, such as air-dry and baking alkyds, as well as nitrocellulose and polyamide inks.

DCL AG123 Fine Satin Silver, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 1836 Azo Orange, PO.36 is an opaque grade of PO.36 that exhibits a reddish-shaded orange color with excellent light and weather fastness characteristics. 1836 provides high opacity and good flow properties in a variety of plastics, coatings, and inks.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL AG120 Shiny Satin, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 1482 2B Red, PR.48:2 is a calcium precipitated bright blue shade of 2B red with good properties. With exceptional resistance properties, this product is widely used in various applications, especially in water flexo inks and UV inks.

DCL 5613 Blue GS, PB.15:3 is a beta-form phthalocyanine blue pigment. It is a stir-in dispersible product that can be used without the need for expensive grinding equipment. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL A3RJ Indanthrone Blue, PB.60 is a strong red shade and highly saturated blue pigment that combines very good tinctorial properties with excellent fastness properties. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL MADDERCLDX Alizarine Red, PR.83 is a bright blue-shaded red pigment used primarily for offset inks. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability, making it a reliable and versatile choice for a range of coating and ink applications.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL 1403B 2B Red, PR.48:3 is a yellow-shaded red pigment 48:3. This product is a good alternative to barium lithol pigments with good wax bleed resistance. DCL 1403B 2B Red is yellower than Red 48:2. It is recommended to be used in plastic, ink, and coating applications.

DCL AG351 Glitter Gold, 20 - 80 m is a gold translucent pearlescent pigment with a glittery finish. This product is composed of a mixture of titanium, mica, and iron oxide that takes on the appearance of a gold powder, and is approved by the FDA under Section 178-3297.

DCL 06-905 DNA Orange, PO.5 is a bright, semi-opaque orange pigment with good lightfastness. It is used in some applications to replace molybdate oranges. However, due to its poor solvent stability in some solvents, it is not recommended for baking systems. It is recommended for trade-sale paints, air-dry industrial coatings, water, solvent, and UV based printing inks.

DCL 1202 Diarylide Yellow, PY.14 is a green-shaded, semi-opaque yellow pigment. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL AG522 Red Brown Satin, 5 - 25 m is a reddish-shaded brown pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL PR-258 Barium Lithol Red, PR.49:1 is a transparent blue-shaded red pigment with low viscosity and excellent tinting strength. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for a wide range of inks and coating applications.

DCL 8916 Transparent Yellow Iron Oxide, PY.42 is a high-performance transparent yellow iron oxide offering high color strength, weather resistance, and UV protection properties. 8916 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL AG323 Royal Satin, 5 - 25 m is a gold pearlescent pigment with a satin finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 1176 Benzimidazolone Red, PR.176 is a transparent, bright, blue-shaded red with good overall fastness properties. The product has a wide range of applications, including its use in plastics such as PVC, PP, PS and PE, as well as in powder and industrial coatings. Additionally, it is also used in solvent flexo and inkjet inks.

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL AG120A Shiny Satin, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL AG302 Satin Gold, 5 - 25 m is a gold transulcent pearlescent pigment with a satin finish and is FDA approved (Section 178-3297). This pigment finds major applications in the following: Plastics such as PVC, PP. PS, PE and PET. Powder and industrial coatings. UV and offset inks Rubber products

DCL RE531 Red, PR.83 is a blue-shaded red pigment that exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for use in general industrial applications, water flexo inks and artist paints.

DCL 1243 Diarylide Yellow, PY.83 is a red-shade diarylide yellow pigment specially formulated for use in nitrocellulose, polyamide, and polyurethane solvent-based inks. This product offers excellent transparency, high gloss, and strong tinting strength, making it ideal for applications in solvent-based inks.