Products
Gellner
Ottopol SX-30
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces: Paper, Metal, Plastics
Glass Transition Temperature (Tg): -30.0 - -30.0 °C
Features: Good Leveling, Solvent Resistance, Multi-Substrate Adhesion, High Gloss, Alkali Resistance, Long Open Time, Excellent Flow, Excellent Adhesion
Ottopol SX-30 is a self-crosslinking acrylic emulsion for flexo or gravure printed films. This translucent emulsion polymer exhibits resistance to alkalis and solvents, such as diluted alcohol solutions. It has excellent adhesion to substrates and provides excellent resolubility properties when applied.
Gellner
Ottopol KX-101
Chemical Family: Acrylics & Acrylates
Glass Transition Temperature (Tg): 32.0 - 32.0 °C
Features: Water Resistance
Ottopol KX-101 is a hydroxyl-functional cationic acrylic solution polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 11.5% epoxy silane and 11.5% polyisocyanate based on solids. This product undergoes ambient curing very quickly, and in 15 minutes the film will have water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs of acetone resistance. Detergents and cleaners will not remove this film, and the final dried film resists staining.
Gellner
Ottopol SF-49
Chemical Family: Acrylics & Acrylates
End Uses: Primer
Compatible Substrates & Surfaces: Metal
Features: Corrosion Resistance, High Gloss, Water Resistance
Ottopol SF-49 is a self-crosslinking acrylic emulsion that can be formulated into a corrosion-resistant primer or semi-gloss paint. The dry film has outstanding water resistance and will not blush even after prolonged exposure to water.
Gellner
Ottopol 1960
Chemical Family: Acrylics & Acrylates
End Uses: Solventless & High Solids Coating
Compatible Substrates & Surfaces: Masonry, Plastics, Metal
Glass Transition Temperature (Tg): 42.0 - 42.0 °C
Features: Excellent Adhesion, Multi-Substrate Adhesion, Corrosion Resistance, High Performance
Ottopol 1960 is an anionic acrylic emulsion used as a high-solids binder. It exhibits excellent adhesion to metal, plastic, and masonry substrates and provides built-in flash rust protection. This product is suitable for high-performance sealants, patching compounds, contact adhesives, and coating formulations.
Gellner
Ottopol KO
Chemical Family: Styrenics, Styrene Copolymers, Styrene-Acrylic Copolymer
Glass Transition Temperature (Tg): 0.0 - 0.0 °C
Features: Blocking Resistance, Excellent Adhesion, Multi-Substrate Adhesion, Stain Resistance
Ottopol KO is a cationic styrene/acrylic emulsion. This co-polymer is the latest in stain-blocking technology. It blocks tannin oils, stains on drywall, water stains from concrete blocks in basements, and fungal growth in damp or humid environments. The products made from this polymer display excellent adhesion to a variety of surfaces.
Gellner
Gellner Wonderblock
Chemical Family: Acrylics & Acrylates
End Uses: Top Coat, Primer, Waterborne Coating
Features: Stain Resistance, Blocking Resistance
Gellner Wonderblock is a new binder technology for waterborne stain-blocking primers. This product forms a resistant barrier to water-soluble tannins and prevents topcoats from staining. The polymer backbone discovered by our research chemists is resistant to tannin and nicotine stains. It forms an impenetrable barrier that outperforms all other attempts at solving the bleeding of stains.
Gellner
Ottopol 502
Chemical Family: Acrylics & Acrylates
End Uses: Waterborne Coating
Glass Transition Temperature (Tg): 88.0 - 88.0 °C
Features: Blocking Resistance, Good Compatibility
Ottopol 502 is a non-ionic acrylic emulsion designed to increase the blocking of ordinary systems. This hard, non-film forming polymer improves the resistance properties of a standard ink or coating and has excellent compatibility with a wide range of resins.
Gellner
Ottopol SX-50
Chemical Family: Acrylics & Acrylates
Compatible Substrates & Surfaces: Paper, Metal, Plastics
Glass Transition Temperature (Tg): 0.0 - 0.0 °C
Features: Good Leveling, Solvent Resistance, Blocking Resistance, Abrasion Resistance, Multi-Substrate Adhesion, High Gloss, Alkali Resistance, Long Open Time, Excellent Flow, Excellent Adhesion
Ottopol SX-50 is a self-crosslinking acrylic emulsion with good adhesion to non-porous surfaces. This product has alkali resistance and exceptionally good adhesion to plastic films, foils, and other metallic surfaces. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.
Gellner
Ottopol 25-50E
Function: Binder, Grinding Aid
Chemical Family: Acrylics & Acrylates
Compatible Polymers & Resins: Polystyrenes (PS), Polyesters, Polyvinyl Chloride (PVC), Cellulose & Cellulosics
Ottopol 25-50E converts into a low-cost solution polymer for pigment grinding and high-gloss flexo and gravure inks. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.
Gellner
Ottopol K-66
Chemical Family: Acrylics & Acrylates
End Uses: Varnishes
Compatible Substrates & Surfaces: Paper, Metal, Textiles, Plastics
Glass Transition Temperature (Tg): 86.0 - 86.0 °C
Features: Good Leveling, Alkali Resistance, Long Open Time, Excellent Flow, High pH Resistance, Excellent Solubility
Ottopol K-66 is a hard cationic acrylic emulsion for alkali resistance. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. To aid in film formation, a coalescent solvent such as Texanol can be added.
Gellner
Ottopol S-75
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces: Paper
Glass Transition Temperature (Tg): 25.0 - 25.0 °C
Features: Excellent Adhesion, Excellent Solubility, High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow
Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.
Gellner
Ottopol 300
Chemical Family: Acrylics & Acrylates
End Uses: Waterborne Coating, Sealer
Features: Outdoor Durability, Low Foaming, Less Dirt Pick Up Potential, Low Odor
Ottopol 300 is a flexible, 100% anionic acrylic emulsion polymer with excellent film-forming properties and resistance to grain cracking and flaking when applied over bare wood. This product also exhibits superior tint retention when compared to other conventional acrylic polymers.
Gellner
Ottopol K-65
Chemical Family: Acrylics & Acrylates
End Uses: Varnishes
Compatible Substrates & Surfaces: Plastics, Paper, Metal, Textiles
Glass Transition Temperature (Tg): 81.0 - 81.0 °C
Features: Long Open Time, Excellent Flow, High pH Resistance, Excellent Solubility, Good Leveling, Alkali Resistance
Ottopol K-65 is a hard cationic acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to plastic films, foils, and other metallic surfaces. Additionally, when this product is formulated with Ottopol K-633, it has improved flow, leveling, and open time when compared to Ottopol K-362.
Gellner
Ottopol K-672
Chemical Family: Cationics, Acrylics & Acrylates
Glass Transition Temperature (Tg): 10.0 - 10.0 °C
Features: Water Resistance, Stain Resistance, Room Temperature Curing
Ottopol K-672 is a hydroxyl-functional cationic acrylic emulsion polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 11.5% epoxy silane based on solids. Detergents and cleaners will not remove this film, and the final dried film has excellent water resistance and stain resistance.
Gellner
Ottopol SX-75
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Glass Transition Temperature (Tg): 25.0 - 25.0 °C
Features: Excellent Adhesion, Abrasion Resistance, High Gloss, Good Leveling, Alkali Resistance, Solvent Resistance, Blocking Resistance, Long Open Time, Excellent Flow
Ottopol SX-75 is a self-crosslinking acrylic emulsion with good gloss for flexo and gravure printing. This product has alkali resistance and exceptionally good adhesion to vinyl and other non-porous substrates. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.
Gellner
Ottopol S-100
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces: Paper
Glass Transition Temperature (Tg): 50.0 - 50.0 °C
Features: High Gloss, Good Leveling, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-100 is a non-film-forming emulsion polymer for glossy flexo and gravure inks. This product has exceptionally good adhesion to vinyl and other non-porous substrates and provides non-curling properties. It has improved flow and leveling characteristics, which provide a high gloss finish.
Gellner
Ottopol K-12T
Chemical Family: Acrylics & Acrylates
End Uses: Solventborne Coating, Top Coat, Primer, Waterborne Coating
Glass Transition Temperature (Tg): 0.0 - 0.0 °C
Ottopol K-12T is a cationic acrylic emulsion that is used as a rust-converting primer. It converts the rust of the coating application to a black iron oxide barrier, which can be further top-coated with water- or solvent-based paints. This product does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid.
Gellner
Ottopol S-50
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Glass Transition Temperature (Tg): 0.0 - 0.0 °C
Features: High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-50 is an acrylic emulsion polymer with good adhesion to vinyl and other non-porous surfaces. It provides excellent resolubility properties for flexo and gravure printing applications, and the flow and leveling characteristics provide a high gloss finish. This resin also has non-curling properties.
Gellner
Ottopol 523
Chemical Family: Acrylics & Acrylates
Glass Transition Temperature (Tg): 105.0 - 105.0 °C
Features: Solvent Resistance, Stain Resistance, Blocking Resistance
Ottopol 523 is a hard acrylic emulsion with hydroxyl functionality. This functionality allows crosslinks with melamine and isocyanates for excellent solvent resistance. Formulations using aziridine will require a plasticizer or coalescent solvent to aid in the film formation of the dried coating. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using melamine and PTSA (Para-Toluene Sulfonic Acid) are stable for a minimum of thirty days. The starting formulation requires a web temperature of 180°F to activate the cross-linking of the resins. An increase in PTSA will lower the temperature required to activate cross-linking, but larger amounts of PTSA will increase the hardness of the dry film. There are no plasticizers or coalescent aids required for film formation when using a melamine resin with this product.
Gellner
Ottopol 1320
Chemical Family: Acrylics & Acrylates
End Uses: Sealer
Compatible Substrates & Surfaces: Terrazzo, Concrete, Masonry, Tile
Glass Transition Temperature (Tg): 18.0 - 18.0 °C
Features: Good Toughness, Abrasion Resistance, Chemical Resistance, Reduced Wear, Alkali Resistance, UV Resistance
Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.
Gellner
Ottopol M-49
Chemical Family: Acrylics & Acrylates
Glass Transition Temperature (Tg): 20.0 - 20.0 °C
Features: Good Compatibility, Excellent Adhesion, Good Pigment Wetting, Water Resistance, Improved Ageing Resistance
Ottopol M-49 is an emulsion polymer with excellent adhesion properties. It has been neutralized with dimethylethanolamine, which yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA do not promote the tarnishing of metallic pigments. This product has been proven to have good aging stability and compatibility with additives and other resin systems.
Gellner
Ottopol KX-99
Chemical Family: Acrylics & Acrylates
Glass Transition Temperature (Tg): 32.0 - 32.0 °C
Features: Solvent Resistance, Water Resistance, Stain Resistance, Room Temperature Curing, Reduced Wear
Ottopol KX-99 is a hydroxyl-functional cationic acrylic solution polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 20% epoxy silane and 20% polyisocyanate based on solids. This product undergoes ambient curing very quickly, and in less than one hour the film will have water resistance. Allowing the film to cure for two hours will result in a film that has over 100 double rubs of acetone resistance. Detergents and cleaners will not remove this film, and the final dried film resists staining.
Gellner
Ottopol 151
Chemical Family: Acrylics & Acrylates
Compatible Substrates & Surfaces: Elastomers & Rubbers
Glass Transition Temperature (Tg): 25.0 - 25.0 °C
Features: Water Resistance
Ottopol 151 is an anionic acrylic emulsion with a low glass transition temperature of -25°C. It showed excellent water resistance after a 4 hour ambient cure of a wet, 25 mil thick film. This product is mainly used for elastomeric roof coatings.
Gellner
Ottopol SX-100
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces: Paper
Glass Transition Temperature (Tg): 50.0 - 50.0 °C
Features: Abrasion Resistance, Multi-Substrate Adhesion, High Gloss, Good Leveling, Alkali Resistance, Solvent Resistance, Blocking Resistance, Long Open Time, Excellent Flow
Ottopol SX-100 is a self-crosslinking acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to substrates and is non-film-forming for glossy flexo and gravure inks. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.
Gellner
Ottopol S-30
Chemical Family: Acrylics & Acrylates
End Uses: Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces: Plastics
Glass Transition Temperature (Tg): -20.0 - -20.0 °C
Features: High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-30 is an acrylic emulsion with a low glass transition temperature of -20°C. It is used for adhesion to plastic films, vinyl, and other non-porous substrates that require a hard film. This product is suitable for flexo or gravure printing applications.
Gellner
Ottopol 25-30
Function: Binder, Grinding Aid
Chemical Family: Acrylics & Acrylates
Compatible Polymers & Resins: Polystyrenes (PS), Polyesters, Polyvinyl Chloride (PVC), Cellulose & Cellulosics
Ottopol 25-30 is the ammonia-cut version of Ottopol 25-50E. This solution polymer has good adhesion to non-porous surfaces. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.
Gellner
Ottopol SF-45
Glass Transition Temperature (Tg): 39.0 - 39.0 °C
Ottopol SF-45 is a unique acrylic polymer that results in a high-density, cross-linked polymer upon drying at room temperature. Where solvent resistance is required, many coatings can be derived from this polymer. It is mainly used as a coating for wood or wooden furniture.
Gellner
Ottopol 1450
Glass Transition Temperature (Tg): 24.0 - 24.0 °C
Ottopol 1450 is a hard-modified anionic acrylic emulsion with abrasion and wear resistance. This product has good UV resistance, chemical resistance, and resistance to blush. It has outstanding compatibility with urethane emulsions, providing essentially water-clear blends. It is used as wood finishes and cement sealers.