Products

HALOX® XTAIN® L-44 is a very effective liquid tannin stain-blocking additive that provides high performance and good compatibility in most water-based coating systems. Excellent tannin stain blocking properties can be achieved with HALOX® XTAIN® L-44 without the need for zinc oxide, which is required to achieve performance by most tannin blocking polymers on the market today. HALOX® XTAIN® L-44 eliminates the need for zinc oxide without sacrificing performance, resulting in improved package stability and shelf life of the coating system.

LOPON® PO is a light yellow, viscous liquid dispersing agent formulated for use in emulsion paints, varnishes, and pigment pastes. It enables improved scrubbing resistance and high gloss in emulsion varnishes and is especially suitable for tinting systems. LOPON® PO also ensures good storage stability for paints, ensuring the longevity of the final product.

HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.

POLYRON® 322 is a white powder dispersing agent designed for use in emulsion paints, plasters, and adhesives. When applied in combination with polyacrylates such as LOPON® DA 200, POLYRON® 322 improves the storage stability of the product. Its dispersing action also ensures an optimal particle size is rapidly achieved, enhancing the final product's quality.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® RC-980 is an organic additive designed to convert red rust to black iron oxide. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It converts the rust within minutes of the coating application and forms a black iron oxide barrier that can be further top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid.

POLYRON® N is a white powder dispersing agent for emulsion paints, plasters, and adhesives. Its high dispersing effectivity quickly achieves an optimal particle size. It is ideal for use as a dispersing agent for emulsion paints and plasters, and it reduces water hardness and deflocculates pigments and fillers in aqueous suspensions. It can achieve high solid contents in emulsion paints with low viscosity.

HALOX® BW-191 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is recommended for use in most waterborne systems, such as latexes and water reducibles, and due to its lower oil absorption, it can also be effective in anticorrosive high-solids coatings. On the other hand, HALOX® BW-111 is recommended for use in solventborne epoxy systems, both conventional and high-solids.

HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne coating systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems. It may also be used as a metal pretreatment additive.

LOPON® 890 is a viscous liquid dispersing agent for emulsion paints, varnishes, plasters, and adhesives. It offers excellent dispersing properties, high solid content availability, and good storage stability for the paints. It is also stable with glycol and offers high gloss, making it an ideal choice for a wide range of applications.

HALOX® CW-22/221 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-22/221 is recommended for use in primer systems based on traditional solvent alkyd technology. It can effectively be formulated into such resins as medium- and long-oil alkyds. HALOX® CW-22/221 is compliant with ASTM D7089, which specifies the requirements for calcium borosilicate pigments for use in paints.

LOPON® PL is formulated using a blend of amine phosphonate and polyacrylate copolymer. It provides excellent dispersing properties, ensuring uniform distribution of pigments. This feature effectively prevents color variations and fluctuations. LOPON® PL prevents uneven color shading caused by different brush stroke directions.

HALOX® CW-491 is a white, non-refractive, heavy metal-free pigment used as a corrosion inhibitor in protective coating systems. It is versatile and can be used with a variety of solvent and waterborne resin systems. The recommended loading levels for HALOX® CW-491 vary depending on the type of system used. For waterborne systems, the recommended loading levels range from 5–8% based on the total formula weight, while for solventborne systems, the recommended loading levels range from 7–12% based on the total formula weight.

POLYRON® N NEW is a white, hygroscopic agglomerate dispersing agent that is ideal for emulsion paints, plasters, and adhesives. Its high dispersing effectiveness quickly achieves optimal particle size. It reduces water hardness, deflocculates pigments and fillers in aqueous suspensions, and can help achieve high solid contents in emulsion paints with low viscosity.

LOPON® E 81 is a light yellow, opaque, and viscous defoamer for use in paints and plasters. It is VOC, mineral oil, and silicone-free and provides good processing properties, compatibility with different binders, and a long-term effect. It does not negatively affect the storage stability of the final product and conforms to Ecolabel, BfR XIV, and FDA regulations.

HALOX® CW-291 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-291 has the lowest oil absorption of all our borosilicate products and is recommended for use in protective coating systems based on alkyd technology. Because of its low oil absorption, HALOX® CW-291 is specifically suggested for use in high-solids, medium-gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. HALOX® CW-291 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 1, class B.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

LOPON® ST is a highly effective stabilizer for emulsion silicate paints that prevents the formation of a polymeric network by the silicate groups in water glass during storage. The viscosity of the paint quickly levels off and remains stable for an extended period of time.

LOPON® DA 201 is a highly effective dispersing agent formulated with low-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 201 achieves exceptional deflocculation results when incorporated into highly filled systems containing inorganic pigments like titanium dioxide, calcium carbonate, and mica. The product demonstrates excellent alkaline stability and exhibits strong compatibility with polyphosphates such as POLYRON® N, resulting in impressive storage stability.

LOPON® DA 200 is a universal dispersing agent formulated with low-molecular-weight sodium polyacrylate. It provides exceptional deflocculation results in systems with high filler content, including inorganic pigments like titanium dioxide, calcium carbonate, and mica. LOPON® DA 200 exhibits excellent alkaline stability and demonstrates strong compatibility with polyphosphates such as POLYRON® N. This combination ensures remarkable storage stability for the product.

LOPON® E 71 is a VOC-, mineral oil-, and silicone-free defoamer for use in paints and plasters. It has a good long-term effect, a wide application range, and is compatible with different emulsions. It has low sedimentation and does not cause fogging. It conforms to BfR XIV and FDA regulations for safety.

HALOX® 515 is a liquid organic corrosion inhibitor for high-gloss (direct-to-metal) coating systems and will provide cost-effective flash rust protection and long-term corrosion protection when used as recommended. HALOX® 515 is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal-free, nitrite-free, and contains no chromates or phosphates. Testing with HALOX® 515 has shown improved adhesion at the scribe and good humidity resistance. Testing has also shown HALOX® 515 to be effective as a flash rust inhibitor on weld seams.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

HALOX® XTAIN® A is a white, non-refractive, tannin stain-inhibiting pigment used in protective coating systems. HALOX® XTAIN® A is a highly efficient tannin stain inhibitor providing a high level of performance and compatibility in a variety of resin systems such as styrene-butadiene latexes, acrylic latexes, vinyl acrylic latexes, and solventborne alkyds.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

LOPON® DA 400 is a universal dispersing agent formulated with middle-molecular-weight sodium polyacrylate. It delivers outstanding deflocculation results when utilized in highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. LOPON® DA 400 exhibits remarkable alkaline stability and demonstrates strong compatibility with polyphosphates like POLYRON® N. This combination ensures excellent storage stability for the product.

LOPON® DA 401 is a highly effective dispersing agent formulated with middle-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 401 achieves excellent deflocculation results when incorporated into highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. The product possesses high alkaline stability and exhibits strong compatibility with polyphosphates like POLYRON® N, offering very good storage stability.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® CW-2230 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-2230 has the highest borate content and can be effectively formulated into resins such as medium and long-oil alkyds, epoxy-esters, and modified alkyd systems. HALOX® CW-2230 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 2.

HALOX® 515 LFG is a low-freeze-grade liquid organic corrosion inhibitor suitable for high-gloss (direct-to-metal) coating systems. When used as recommended, HALOX® 515 LFG provides cost-effective flash rust protection and long-term corrosion protection. It is effective for thin film applications (<2 mils). HALOX® 515 LFG is heavy metal-free, nitrite-free, and does not contain chromates or phosphates. Testing with HALOX® 515 LFG has shown improved adhesion at the scribe and good humidity resistance. Additionally, it has been proven effective as a flash rust inhibitor on weld seams.

HALOX® FLASH-X® 330 is a liquid additive that is effective in preventing flash rust and in-can rusting in waterborne protective coatings without the use of nitrites. It is a nitrite-free product that provides excellent flash rust inhibitory performance on various metal substrates and is recommended for use in high-gloss systems. It does not detract from gloss, is easy to use, and can be incorporated at any stage of coating manufacture. Additionally, it can be post-added to any coating system with ease. However, it is important to check compatibility before use, as with any additive.

HALOX® 350 is a highly active organic corrosion inhibitor with 97–100% solids, specifically designed to prevent flash rust and in-can corrosion while also providing temporary corrosion protection. This product is an effective alternative to toxic nitrite-based flash rust inhibitors. It is in the form of a slightly yellow powder.

LOPON® E 13 is a defoamer that is specifically designed for use in paints and plasters. It is mineral oil-free and silicone-free, making it an excellent choice for those who prefer alternative solutions. LOPON® E 13 provides a good long-term effect and has a wide range of applications. It is also highly compatible with different types of emulsions and has low sedimentation during storage. Additionally, LOPON® E 13 is compliant with BfR XIV and FDA regulations, ensuring its safety for use.

LOPON® DV is a white, crystalline powder that contains disodium phosphate and is designed to function as a corrosion inhibitor and afterglow suppressant for water-based paints. It is particularly effective as a corrosion inhibitor for emulsion paints and plasters. When binding iron ions, a recommended dosage of 5.0–7.5 mg of LOPON® DV per mg of iron is recommended.

POLYRON® 322 NEW is a white, hygroscopic agglomerate dispersing agent designed for use in emulsion paints, plasters, and adhesives. Its dispersing action ensures that an optimal particle size is rapidly achieved, making it best suited as a dispersing agent for waterborne paints, especially emulsion paints. POLYRON® 322 NEW slows down sedimentation, reduces water hardness, and has a good binding capacity with respect to calcium and heavy metal ions.