Products

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

LOPON® DA 400 is a universal dispersing agent formulated with middle-molecular-weight sodium polyacrylate. It delivers outstanding deflocculation results when utilized in highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. LOPON® DA 400 exhibits remarkable alkaline stability and demonstrates strong compatibility with polyphosphates like POLYRON® N. This combination ensures excellent storage stability for the product.

LOPON® E 81 is a light yellow, opaque, and viscous defoamer for use in paints and plasters. It is VOC, mineral oil, and silicone-free and provides good processing properties, compatibility with different binders, and a long-term effect. It does not negatively affect the storage stability of the final product and conforms to Ecolabel, BfR XIV, and FDA regulations.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

LOPON® DA 201 is a highly effective dispersing agent formulated with low-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 201 achieves exceptional deflocculation results when incorporated into highly filled systems containing inorganic pigments like titanium dioxide, calcium carbonate, and mica. The product demonstrates excellent alkaline stability and exhibits strong compatibility with polyphosphates such as POLYRON® N, resulting in impressive storage stability.

POLYRON® 322 NEW is a white, hygroscopic agglomerate dispersing agent designed for use in emulsion paints, plasters, and adhesives. Its dispersing action ensures that an optimal particle size is rapidly achieved, making it best suited as a dispersing agent for waterborne paints, especially emulsion paints. POLYRON® 322 NEW slows down sedimentation, reduces water hardness, and has a good binding capacity with respect to calcium and heavy metal ions.

TARGON® FM is a processing aid employed as an auxiliary agent for cementitious leveling compounds. It constitutes a blend of sodium phosphate, hydroxypolycarboxylic acid, and a wetting agent. This product is particularly well-suited for ternary systems involving Portland cement, gypsum, and refractory cement.

TARGON® G 5 is a secondary retarder derived from condensed phosphates. It presents as a white, fine, non-hygroscopic powder, serving as a secondary retarder element for pre-mixed gypsum plaster. This product exerts a dispersing influence on the plaster's solid components. It ensures consistent setting and extends the interval for manipulation between cutting and felting stages. TARGON® G 5 further enhances the final treatment characteristics.

LOPON® E 13 is a defoamer that is specifically designed for use in paints and plasters. It is mineral oil-free and silicone-free, making it an excellent choice for those who prefer alternative solutions. LOPON® E 13 provides a good long-term effect and has a wide range of applications. It is also highly compatible with different types of emulsions and has low sedimentation during storage. Additionally, LOPON® E 13 is compliant with BfR XIV and FDA regulations, ensuring its safety for use.

TARGON® GA 1 is a setting retarder formulated with sodium phosphate, hydroxypolycarboxylic acid, and an anticaking agent. This white powder can be blended with TYLOSE® MC variants and other processing auxiliaries, such as surfactants. Serving as a setting retarder, it finds application in gypsum plaster that is devoid or has minimized calcium hydroxide content (both manual and mechanical applications), as well as in plaster adhesives.

POLYRON® 322 is a white powder dispersing agent designed for use in emulsion paints, plasters, and adhesives. When applied in combination with polyacrylates such as LOPON® DA 200, POLYRON® 322 improves the storage stability of the product. Its dispersing action also ensures an optimal particle size is rapidly achieved, enhancing the final product's quality.

TARGON® G 2 is a distinct product grounded in condensed phosphates, coupled with an anticaking agent characterized by hydrophobic attributes. It appears as a white, finely textured powder with commendable flowability. Serving as a secondary retarder element for pre-mixed gypsum plaster, this product prevents abrupt caking, establishes consistent setting, extends the time allocated for treatment between cutting and felting, and enhances the qualities of the final treatment.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

LOPON® E 100 is a defoamer for glossy paints that is VOC-, mineral oil-, and silicone-free. It is designed to provide a high gloss on the paint surface while offering a long-term effect. With its wide range of applications, this product exhibits excellent compatibility with various types of emulsions. Additionally, it boasts low sedimentation, ensuring smooth and consistent performance.

LOPON® DA 200 is a universal dispersing agent formulated with low-molecular-weight sodium polyacrylate. It provides exceptional deflocculation results in systems with high filler content, including inorganic pigments like titanium dioxide, calcium carbonate, and mica. LOPON® DA 200 exhibits excellent alkaline stability and demonstrates strong compatibility with polyphosphates such as POLYRON® N. This combination ensures remarkable storage stability for the product.

POLYRON® N NEW is a white, hygroscopic agglomerate dispersing agent that is ideal for emulsion paints, plasters, and adhesives. Its high dispersing effectiveness quickly achieves optimal particle size. It reduces water hardness, deflocculates pigments and fillers in aqueous suspensions, and can help achieve high solid contents in emulsion paints with low viscosity.

LOPON® ST is a highly effective stabilizer for emulsion silicate paints that prevents the formation of a polymeric network by the silicate groups in water glass during storage. The viscosity of the paint quickly levels off and remains stable for an extended period of time.

LOPON® DA 401 is a highly effective dispersing agent formulated with middle-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 401 achieves excellent deflocculation results when incorporated into highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. The product possesses high alkaline stability and exhibits strong compatibility with polyphosphates like POLYRON® N, offering very good storage stability.

POLYRON® N is a white powder dispersing agent for emulsion paints, plasters, and adhesives. Its high dispersing effectivity quickly achieves an optimal particle size. It is ideal for use as a dispersing agent for emulsion paints and plasters, and it reduces water hardness and deflocculates pigments and fillers in aqueous suspensions. It can achieve high solid contents in emulsion paints with low viscosity.

LOPON® 890 is a viscous liquid dispersing agent for emulsion paints, varnishes, plasters, and adhesives. It offers excellent dispersing properties, high solid content availability, and good storage stability for the paints. It is also stable with glycol and offers high gloss, making it an ideal choice for a wide range of applications.

TARGON® G3 functions as a secondary retarder, operating in conjunction with citric or tartaric acid based on the formulation's pH. For formulations exhibiting an alkaline pH, G3 collaborates with tartaric acid. In formulations with a neutral pH, G3 partners with citric acid. TARGON® G3 contributes to the attainment of consistent setting, an extended working duration, and enhanced qualities during the finishing treatment phase.