Products

Induron AC 403 Acrylic Elastomeric Coating is a 100% acrylic, water borne, high build elastomeric coating that fills and bridges minor hairline cracks. AC 403 is available in AC 403S Smooth and AC 403TX Texture. This flexible finish coat provides long-term protection against wind driven rain and alternate freezing and thawing. It has excellent resistance to long-term exposure to sun light and will allow moisture vapor to escape from the substrate. It will expand and contract allowing minor substrate movements even at temperatures below freezing.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

AC 301 Exterior Wood Primer is a premium quality primer and surfacer specially formulated for very high performance and easy application. AC 301 is an oil-based, alkyd primer pigmented with stain, mold, and mildew blocking pigments. It is capable of being applied in a thick film to allow for sanding to achieve a smooth surface. It is formulated free of lead, mercury, and strong solvents.

E-Bond 100 Penetrating Sealer is a very low viscosity, two component epoxy specially formulated to penetrate and seal concrete, masonry, rusted steel and most chalky coatings. It is available in amber clear and non-opaque off-white. When used as recommended, it is 100% solids, zero VOC, and will not shrink or entrap solvent upon curing.

InduraGuard 9200 is a high-solids, high-build, single-component, self-priming one-coat solution for weathered galavanized and previously painted structures. It is ideal for a single coat application on transmission towers, substation structures, quanset huts, chain-link fencing, and other aged galvanized structures. InduraGuard 9200 is a modified linseed oil, metallic and ceramic pigmented coating designed for maximum corrosion protection over minimal surface preparation. InduraGuard 9200 provides excellent wetting, is easy to apply by airless spray, roller, brush or paint mitt, and can be applied up to 12 mils DFT in a single coat.

Aquanaut© II Acrylic Enamel is a state of the art, single component, water borne, chemically resistant, acrylic gloss enamel. It can be sprayed, brushed and rolled and has excellent dry fall properties when applied correctly. It has excellent flow & leveling characteristics, long term color & gloss retention and excellent dry fall capabilities. Aquanaut© II does not contain lead or chromates, has very low volatile organic content and is available in a wide variety of colors. Conforms to ANSI/AWWA D102-06, OCS-3.

Armorlux 2500 Enamel is the latest innovation in a high gloss, tough, durable industrial maintenance alkyd enamel. It is resistant to mild industrial fumes. It is extremely colorfast and is available in a wide range of colors. It is carefully formulated for excellent smoothness and easy application and contains no lead, mercury or other toxic pigments.

Induron’s AC 303 Acrylic Epoxy Enamel is a two component, high gloss, low odor, water borne acrylic epoxy formulated for exceptional toughness and stain resistance. It has user friendly application properties and is available in a wide range of colors. It is the ultimate in chemical, corrosion, and scrub resistance as available in a water-thinned product.

Induron DTM Enamel is a very fast drying direct to metal spraying enamel. This product has a high gloss finish available in a wide range of colors and it exhibits an excellent clarity and gloss retention on exterior exposure.

Aquanaut Acrylic Primer is a new and improved single component, water borne, rust inhibitive primer. This primer is a Direct to Metal (DTM) Primer with rust inhibitive pigmentation that also has improved flow & leveling characteristics as well as better dry fall capabilities. Aquanaut© Acrylic Primer does not contain lead or chromates, is very low in volatile organic content and is available in tan. Aquanaut Acrylic Primer conforms to priming requirements as outlined in ANSI/AWWA D102-06, OCS-3.