company tower banner

ALCOM® MED

MOCOM Compounds Brand

Supplier:MOCOM Compounds

Products:10

View All ALCOM® MED Products

ALCOM® MED PA66 1000 19046

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Additives Included:Heat Stabilizer
Flexural Modulus:2900.0 - 2900.0 MPa

MOCOM Compounds ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of less than 0.12%. The recommended processing injection molding melt temperatures are between 270-290°C and mold temperatures between 40-80°C. The base polymer is Polyamide 66, and it features easy release (demolding) and heat stabilization. It is suitable for the packaging, Medical / Personal Care market segments and can be used for injection molded parts of various shapes and sizes.

ALCOM® MED PP 2040 BL1182-19

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber

MOCOM Compounds ALCOM® MED PP 2040 BL1182-19 is a polypropylene homopolymer with a 40% glass fiber filler/additive system specifically designed for use in the Medical/Personal Care market segment. It is typically used for housings. To ensure optimal performance, it is recommended that pre-drying be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done with a melt temperature of 200-270°C and mold temperature of 20-90°C. It is important to protect the material from light and not expose it to temperatures above 30°C, as this may cause material degradation.

ALCOM® MED PS 1000 04001

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding

MOCOM Compounds ALCOM® MED PS 1000 04001 has a minimum shelf life of 24 months. Pre-drying conditions include in an air circulating dryer between 60-80°C for 2-3 hours, or in a dry air (dessiccant) dryer between 60-80°C for 2-3 hours depending on the moisture content. Processing injection molding requires a melt temperature between 180-260°C and a mold temperature between 10-70°C. The base polymer is Polystyrene and it is typically used for various applications such as consumer goods, food packaging, medical devices, and more.

ALCOM® MED PS 1000 04002

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding

MOCOM Compounds ALCOM® MED PS 1000 04002 is a polystyrene base polymer with a minimum shelf life of 24 months. For processing injection molding, the melt temperature should be 180-260°C and the mold temperature should be 10-70°C. It can be used for various applications.

ALCOM® MED PS 1000 14113

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding

MOCOM Compounds ALCOM® MED PS 1000 14113 is a polystyrene with a minimum shelf life of 24 months and is suitable for injection molded parts such as housings. The melt temperature for injection molding should be 180-260°C, and the mold temperature should be 10-70°C.

ALCOM® MED PS 1000 19041

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding

MOCOM Compounds ALCOM® MED PS 1000 19041 is a polystyrene injection molding grade suitable for medical and personal care applications, with a minimum shelf life of 24 months. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. It is typically used for manufacturing housings and other medical devices.

ALCOM® MED PS 1000 AS 14114

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding
Additives Included:Anti-Static Agent

MOCOM Compounds ALCOM® MED PS 1000 AS 14114 is a polystyrene impact resin with a permanent antistatic filler/additive system designed for Medical/Personal Care applications, suitable for injection molded parts such as housings. Its melt temperature should be between 180-260°C and its mold temperature should be between 10-70°C. Pre-drying should be done in an air circulating dryer at 60-80°C for 2-3 hours, or in a dry air (dessicant) dryer at 60-80°C for 2-3 hours, depending on the moisture content.

ALCOM® MED PS 1000 AS 14115

Polymer Name:Polystyrene (unspecified)
Processing Methods:Injection Molding
Additives Included:Impact Modifier, Anti-Static Agent

MOCOM Compounds ALCOM® MED PS 1000 AS 14115 has a minimum shelf life of 24 months. It is based on a polystyrene impact polymer and contains an antistatic and permanent filler/additive system. It is designed for medical and personal care applications such as housings and is processed by injection molding with a melt temperature of 180-260°C and a mold temperature of 10-70°C. To ensure optimal performance, pre-drying conditions should be conducted in an air circulating dryer at 60-80°C for 2-3 h or in a dry air (dessiccant) dryer at 60-80°C for 2-3 h, depending on moisture content.

ALCOM® MED PS 2015 05001

Polymer Name:Polystyrene (unspecified)
Fillers Included:Milled Glass Fiber, Glass Fiber
Processing Methods:Injection Molding

MOCOM Compounds ALCOM® MED PS 2015 05001 is an injection molding grade material suitable for producing housings used in various applications. It is composed of impact polystyrene as the base polymer and 15% glass fibers as the filler/additive system. This material should be stored in a dry, protected location away from light, and not above 30°C.

ALCOM® MED PS 2030 07001

Polymer Name:Polystyrene (unspecified)
Fillers Included:Glass Fiber
Processing Methods:Injection Molding
Additives Included:Heat Stabilizer

MOCOM Compounds ALCOM® MED PS 2030 07001 is a base polymer with a minimum shelf life of 24 months. It is processed with injection molding, with a melt temperature of 180-260°C and a mold temperature of 10-70°C. It is composed of 30% glass fibers, is heat stabilized, and has easy release (demolding). It is used primarily in medical and personal care applications for injection-molded parts, such as housings.

carousel-background

Featured Products

ALCOM® MED PA66 1000 19046-carousel-image

ALCOM® MED

ALCOM® MED PA66 1000 19046

ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content,

Applications: Non-Food Consumer Packaging, Healthcare Packaging, Packaging

Product Families: Polyamides, Engineering & Specialty Polymers

Chemical Family: Polyamides

Polymer Name: Polyamide 66 (PA 66)

Labeling Claims: Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, PAH-Free, Conflict minerals-free, PFOS-free, PFOA-free

Knowde Brand Summary

Identification

Additives Included: Anti-Static Agent,
Heat Stabilizer,
Impact Modifier
Chemical Family: Polyamides,
Polyolefins,
Polypropylenes (PP),
Styrenics
Fillers Included: Glass Fiber,
Milled Glass Fiber
Polymer Name: Polyamide 66 (PA 66),
Polypropylene Homopolymer (HPP),
Polystyrene (unspecified)
Technologies: Plastics
Product Families: Basic Thermoplastics
Polyolefins,
Styrenics
Engineering & Specialty Polymers
Polyamides
Plastics & Elastomers Functions: Resin

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
PAH-Free,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free

Applications & Uses

Markets: Electrical & Electronics,
Healthcare & Pharma,
Printing & Packaging
Applications: Medical
Medical Devices & Assemblies
Packaging
Healthcare Packaging,
Non-Food Consumer Packaging
Parts & Components
Housings & Enclosures
Plastics & Elastomers End Uses: Housings,
Medical Devices
Plastics & Elastomers Processing Methods: Injection Molding

Knowde Brand Highlights

ALCOM® MED Highlights and Advantages: Alcom® Medical offers tailor-made compounds for the high requi- rements of the medical industry for medical, pharmaceutical or diagnostic applications.

With our technical and regulatory expertise as well as our customer-specific services, we reduce the complexity for your healthcare application.

Depending on the exact requirements needed for a certain application, combined with customer specific requests such as polymer, color, filler or additive packages, MOCOM offers individual niche products based on a variety of polymers and functional product solutions for the healthcare industry.

Alcom® Medical: the advantages at a glance

Manufacturing according to GMP acc. to EC 2023/2006

Production on a ISO 13485 certified production facility possible

Food contact statements (EU/FDA) available

Use of Medical Grade Plastics (MGP) according to VDI guideline 2017

Statements, testing and/or certification against relevant chapters of ISO 10993 and USP class VI such as EP possible

Notification of change (NoC) through individual agreements

ABS, PA, PC, PE, PP, PS, POM, TPU, PBT, SBC, MABS

Solutions for medical, pharmaceutical and diagnostic applications

Production with GMP (good manufacturing practice) standards

Defined change management

Formulation / ingredients locked

Controlled base resin

Customized optional agreements (quality agreements)