Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 4000.0 | MPa | ISO 178 |
Flexural Strength | 75.0 | MPa | ISO 178 |
Tensile Modulus | 3800.0 | MPa | ISO 527 |
Tensile Strength at Break | 40.0 | MPa | ISO 527 |
Tensile Elongation at Break | 1.2 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 7.5 | kJ/m² | ISO 179/1eU |
Value | Units | Test Method / Conditions | |
Density | 1230.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 102.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 86.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Mould Temperature | 10 - 70 | °C | — |
Melt Temperature | 180 - 260 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 3.5 | cm³/10min | ISO 1133 |
MVR Temperature | 200.0 | °C | — |
MVR Load | 5.0 | kg | — |
Shrinkage (24h) | 0.3 - 0.6 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 60-80 °C for 2-3 h
- In an air circulatIng dryer 60-80 °C for 2-3 h
- Dependant on moisture content
Storage & Handling
- Shelf Life
- Minimum 24 months
- Storage Conditions
Store in dry, protected from light not above 30°C.