Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 9000.0 | MPa | ISO 178 |
| Flexural Strength | 100.0 | MPa | ISO 178 |
| Tensile Modulus | 8850.0 | MPa | ISO 527 |
| Tensile Strength at Break | 60.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 0.8 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 9.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 9.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1320.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 105.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 100.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Mould Temperature | 10 - 70 | °C | — |
| Melt Temperature | 180 - 260 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 1.5 | cm³/10min | ISO 1133 |
| MVR Temperature | 200.0 | °C | — |
| MVR Load | 5.0 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 60-80 °C for 2-3 h
- In an air circulatIng dryer 60-80 °C for 2-3 h
- Dependant on moisture content
Storage & Handling
- Shelf Life
- Minimum 24 months
- Storage Conditions
Store in dry, protected from light not above 30°C.