Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus (Dry) | 11500.0 | MPa | ISO 178 |
Flexural Modulus (Conditioned) | 7500.0 | MPa | ISO 178 |
Flexural Strength (Dry) | 240.0 | MPa | ISO 178 |
Flexural Strength (Conditioned) | 150.0 | MPa | ISO 178 |
Tensile Modulus (Dry) | 12500.0 | MPa | ISO 527 |
Tensile Modulus (Conditioned) | 8000.0 | MPa | ISO 527 |
Tensile Strength (Dry) | 140.0 | MPa | ISO 527 |
Tensile Strength (Conditioned) | 100.0 | MPa | ISO 527 |
Tensile Elongation at Break (Dry) | 3.0 | % | ISO 527 |
Tensile Elongation at Break (Conditioned) | 5.2 | % | ISO 527 |
Impact Strength (Dry, Charpy, at 23°C) | 54.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Conditioned, Charpy, at 23°C) | 59.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Dry, Charpy, at -40°C) | 55.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Conditioned, Charpy, at -40°C) | 47.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Dry, Charpy, at 23°C) | 7.0 | kJ/m² | ISO 179/1eA |
Notched Impact Strength (Conditioned, Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Conditioned, Charpy, at -40°C) | 5.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Dry, Charpy, at -40°C) | 6.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density (Dry) | 1550.0 | kg/m³ | ISO 1183 |
Humidity Absorption (Dry) | 0.2 | % | Sim. to ISO 62 |
Water Absorption (Dry) | 2.2 | % | Sim. to ISO 62 |
Global Warming Potential (GWP) | 0.84 | kg CO₂ eq. | ISO 14040, 14044 |
Value | Units | Test Method / Conditions | |
DSC (Melt Point, Dry) | 265.0 | °C | ISO 11357-1/-3 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.12 | % | — |
Value | Units | Test Method / Conditions | |
Melt Temperature | 280 - 300 | °C | — |
Mould Temperature | 80 - 120 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR, Dry) | 20.0 | cm³/10min | ISO 1133 |
MVR Temperature (Dry) | 300.0 | °C | — |
MVR Load (Dry) | 1.2 | kg | — |
Molding Shrinkage (parallel, Dry) | 0.3 | % | ISO 294-4, 2577 |
Molding Shrinkage (normal, Dry) | 0.7 | % | ISO 294-4, 2577 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in an air circulating dryer for 2-8h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.