Products

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07 is a polycarbonate base polymer, which is impact modified, UV stabilized, and contains recycled material. It is suitable for electrical and electronic, lighting, and various other applications such as light guides, lamps, sockets, etc. It can be processed through injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® POM 770/1.1 CF20 is a Polyoxymethylene Copolymer with 20% carbon fibers that offers electrically conductivity, reduced surface resistivity and high stiffness. It is commonly used for functional components and bearings in automotive, machinery, and other industries. For pre-drying, the material should be placed in a dry air (dessiccant) dryer at 100-110°C for 2-3 hours, or in an air circulating dryer at 100-110°C for 3-5 hours, with a maximum moisture content of less than 0.02%. The melt temperature for injection molding is 190-230°C and the mold temperature is 60-120°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1416-04LD is a polycarbonate base polymer with a special filler and additive system that is UV stabilized and features translucent, light scattering, and easy flow properties. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds TEDUR® L 9200-1 U is a polyphenylene sulfide base polymer with a filler/additive system of 60% glass fiber/mineral. It is designed for pre-drying conditions in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. It offers high toughness, high stiffness, low warpage, and low anisotropic shrinkage, making it suitable for use in the automotive and various market segments. It is typically used for applications such as seals.

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds TEDUR® L 9107-1 is an injection molding grade of Polyphenylene Sulfide base polymer with 40% glass fibers filler/additive system. The melt temperature should be 320-340°C and the mold temperature should be greater than 140°C. It has special features such as high toughness, reduced flash, and increased burst strength. Typical applications include pump components such as pump impellers. For optimal performance, it should be stored dry and protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PC A 1000/526 UV is a polycarbonate-based injection molding grade with a light stabilizer, antistatic, and UV stabilized filler/additive system. It is pre-dried in a dry air (dessiccant) dryer at 120°C for 2-3 hours and in an air circulating dryer at 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of 0.02%. It is then processed in injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C, and has special features such as easy release (demolding) and processing stabilization. Typical applications of this material include various injection molded parts that require light stabilization, antistatic protection and UV stabilization.

MOCOM Compounds ALCOM® PC 740/30 UV FR WT1030-08LD is a polycarbonate base polymer with special filler, flame retardant, halogen and phosphorus free, UV stabilized, with light scattering, extrusion grade and suitable for injection molding. It is used for light transparent components in the automotive, lighting, electrical and electronic market segments, such as lamp covers, display elements and operating elements.

MOCOM Compounds ALCOM® LB PBT FC 2015 17125 BL1118-17 is a Polybutylene Terephthalate base polymer containing 15% glass fibers and is blue in color. It is opaque and is used in the electrical and electronic, medical/personal care market segments for light blocking components. Typical applications include injection molded parts.

MOCOM Compounds ALCOM® LD PC 1000 UV 15112 GY1027-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features translucent, light scattering, high light diffusion, and good flow properties. It is suitable for use in automotive and lighting market segments and is typically used for display elements, operating elements, and light transparent components. It has approvals of GS93016 and is suitable for injection molding using a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16042 WT1048-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering, high light diffusion, and good flow. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALCOM® PC 730/5 UV WT1231-10LDX is a polycarbonate extrusion grade that is UV stabilized and contains a special filler. It is translucent, light scattering, and has high light diffusion, making it ideal for use as lamp covers and other light transparent components in automotive and lighting applications. The melt temperature for extrusion should be in the range of 240-280°C.

MOCOM Compounds ALCOM® PC 740/4 CC1121-05LD is a polycarbonate base polymer containing a special filler/additive system for light scattering, high light transmission, and easy flow. It is approved for GMW15702 and GS93016, and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C. To ensure optimal performance, the product should be stored in a dry place, away from light.

MOCOM Compounds ALTECH® PBT+ABS A 2020/620 GF 20 UV is a highly UV and heat stabilized base polymer composed of Polybutylene Terephthalate and Acrylonitrile Butadiene Styrene with 20% glass fibers, suitable for various injection molded parts. Pre-drying conditions should be done in a dry air (dessiccant) dryer at a temperature of 90-115°C for 2-4 h depending on moisture content, with a maximum moisture content of less than 0.04%. For processing injection molding, the melt temperature should be between 250-280°C and mold temperature between 60-90°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17132 WT1125-17 is a polycarbonate base polymer with a special filler/additive system, designed for the Automotive and Lighting market segments. It is typically used for lamp covers, display elements, and operating elements, and has GS93016 approvals. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1104-20 is a polycarbonate-based polymer with a special filler and UV stabilized additive system, suitable for automotive and lighting applications. It is used for creating light transparent components and black panel technology, with typical applications including display elements and operating elements.

MOCOM Compounds ALCOM® PC 740/4 CC1084-07LD is a polycarbonate base polymer with a special filler/additive system designed for light scattering and high light diffusion. It is commonly used in applications such as lamp covers, display elements, and operating elements in the automotive and lighting markets. The injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C. It has also been approved by GS93016.

MOCOM Compounds ALTECH® PA6 A 1000/320 UV is a Polyamide 6-based polymer with UV stabilization, used for injection molded parts, functional components, and housings. It should be stored in a dry, light-protected environment, not above 30°C. Pre-drying Conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content, with a maximum moisture content of <0.15%. Processing Injection molding should involve a melt temperature of 250-270°C and a mold temperature of 40-80°C. Its target market segments are Automotive, Machinery, Electrical and Electronic, Building and Construction, and Sport and Leisure.

MOCOM Compounds ALTECH® PC A 1000/228 UV is a polycarbonate base polymer with a light stabilizer, antioxidant, and lubricant filler/additive system. It is highly UV stabilized and is suitable for various applications. The pre-drying conditions for this material are 120°C in a dry air (desiccant) dryer for 2-3 h and in an air circulating dryer 100-120°C for 4-12 h, depending on moisture content, with a maximum moisture content of 0.02%. The processing injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C. This material should be stored in a dry and light-protected environment, not exceeding 30°C. No additional sentence required.

MOCOM Compounds ALCOM® PC 740/1.1 CF20 is a polycarbonate base polymer filled with 20% carbon fibers that is electrically conductive, has reduced surface resistivity, high stiffness, and is heat stabilized. It is suitable for use in machinery and various other market segments, and is typically used in the injection molding of housings, functional components, and protection caps. To ensure optimal performance, pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of <0.02%. The melt temperature for injection molding should be between 290-330°C and the mold temperature should be between 80-130°C.

MOCOM Compounds ALCOM® PBT 700/12 PTFE10 is a Polybutylene Terephthalate-based material containing 10% PTFE. It has improved sliding/wear properties, is heat-stabilized, and has good flow properties. It is used for functional components in the Automotive and Machinery markets and should be processed via injection molding at a melt temperature of 250-270°C and a mold temperature of 60-100°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1217-10LD3 is a polycarbonate base polymer filled with a special filler that offers light scattering and high light diffusion. It is mainly used in the automotive and lighting industry for applications such as lamp covers, display components, and operating elements. To pre-dry the polymer, it should be kept at 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, ensuring a moisture content of less than 0.02%. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of less than 0.12%. The recommended processing injection molding melt temperatures are between 270-290°C and mold temperatures between 40-80°C. The base polymer is Polyamide 66, and it features easy release (demolding) and heat stabilization. It is suitable for the packaging, Medical / Personal Care market segments and can be used for injection molded parts of various shapes and sizes.

MOCOM Compounds ALCOM® PA46 920/1 PTFE15 is a polyamide 4.6-based filler/additive system with 15% PTFE, providing improved sliding/wear, heat stability, and is applicable to a range of market segments, such as machinery and automotive. Its applications include functional components, bearings, and sliding elements. To ensure optimal performance, the product should be pre-dried using 80°C in a dry air (dessiccant) dryer for 2-12 hours, dependent on the moisture content, with a maximum moisture content of 0.01%. For injection molding, the melt temperature should be 305-320°C and the mold temperature should be 40-100°C.

MOCOM Compounds TEDUR® L 9409-3.2 is a Polyphenylene Sulfide base polymer containing 30% carbon fibers and 15% PTFE filler/additive system. It has reduced surface resistivity, is electrically conductive, and improved sliding/wear characteristics. It is used in the automotive, machinery, electrical and electronic market segment for functional components, housings, bearings and sliding elements. Pre-drying conditions require a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature greater than 140°C, with appropriate cooling times.

MOCOM Compounds TEDUR® L 9113-2 is a Polyphenylene Sulfide injection molding grade with a filler/additive system of 60% glass fibers. It has a high stiffness and is suitable for use in the Automotive and Machinery markets. Pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing Injection molding should be done with a melt temperature of 320-340°C and a mold temperature greater than 140°C. It is recommended to protect from light and store at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1415-04LD is a polycarbonate injection molding grade with a special filler/additive system that is translucent, light scattering, processing stabilized, UV stabilized, and approved by GS93016. It is designed for pre-drying conditions of 120°C in a dry air (desiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h, with a maximum moisture content of <0.02%. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements. The processing injection molding melt temperature should be 270-310°C, and the mold temperature should be 80-110°C.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® PC 740/4 UV WT1102-04LD is a special filler base polymer polycarbonate that is UV stabilized, has light scattering, high light transmission, and easy flow properties. It is GS93016 approved and is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALTECH® PBT A 1000/100 is a special heat-stabilized Polybutylene Terephthalate base polymer with good flow used for various injection-molded parts. The recommended processing injection-molding melt temperature is 250-270°C and mold temperature 40-70°C. After use, it should be stored dry, in a dark place, and not above 30°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16156 GY1118-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features the properties of being translucent, light scattering, high light diffusion, and having good flow characteristics. It is approved by GS93016 and is suitable for Automotive and Lighting market segments, with typical applications such as lamp covers, display elements, and operating elements. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature should be 80-110°C. When storing this material, it should be kept dry and protected from light.

WIC PA66 10 N is a polyamide 66 base polymer with 10% carbon fiber filler and a natural (carbon optic) color. It has medium viscosity and heat aging stabilized properties, making it ideal for use in the Automotive and Sport market segments. To ensure optimal performance, this polymer must be protected from light. Processing conditions involve injection molding using a melt temperature of 280-300°C and a mold temperature of 80-120°C. As it has increased thermal conductivity, this must be taken into consideration when setting up the injection molding process.

MOCOM Compounds Alcom® LD PC 1000 18002 CC1001-18 is a polycarbonate base polymer with a special filler/additive system that provides translucency, high light transmission, light scattering, and good flow. It is approved by GS93016 and is suitable for applications in lighting and light transparent components, such as lamp covers, display elements, and operating elements. For processing, injection molding should be used with a melt temperature of 270-300°C and a mold temperature of 80-100°C. The product must be pre-dried at 120°C in a dry air (dessiccant) dryer for 2-3 hours with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/128 UV is a UV-stabilized polycarbonate that has been pre-dried under 120°C in a dry air (dessiccant) dryer for 2-3 hours and in an air circulating dryer between 100-120°C for 4-12 hours, depending on the moisture content, with a maximum moisture content of less than 0.02%. It is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for exterior parts, light transparent components, injection molded parts, and various other lighting, electrical, and electronic applications such as lamp covers, housings, and more.