Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 1800.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 36.0 | MPa | ISO 178 |
| Tensile Modulus | 1600.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 20.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 1.5 | % | ISO 527 |
| Tensile Elongation at Break | 40.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 165.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 125.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 7.5 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1030.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 87.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 75.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Mould Temperature | 10 - 70 | °C | — |
| Melt Temperature | 180 - 260 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 4.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 200.0 | °C | — |
| MVR Load | 5.0 | kg | — |
| Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 60-80 °C for 2-3 h
- In an air circulatIng dryer 60-80 °C for 2-3 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.