Products

MOCOM Compounds ALTECH® ABS A 1000/587 is a black acrylonitrile/butadiene/styrene/copolymer injection molding grade suitable for various injection molded parts and extrusion applications. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of <0.20%. Melt temperature for injection molding is 200-240°C and mold temperature is 50-80°C. The product should be protected from light and stored at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds ALTECH® MBS A 1000/500 is a polystyrene copolymer that is processing stabilized, elastomer modified, and injection molding grade. When used for injection molding, the melt temperature should range from 190-230°C and the mold temperature should range from 10-60°C. This product is suitable for various applications and provides excellent results.

MOCOM Compounds ALTECH® ABS A 1000/667 is a Base Polymer made of Acrylonitrile/Butadiene/Styrene/Copolymer that features improved surface, low gloss, and heat stabilization. It is used in the Automotive Market Segment for injection molded parts and clothing/fasteners. Pre-drying Conditions require 80°C in a dry air (dessiccant) dryer for 2-4 h and 80°C in an air circulating dryer for 3-6 h, depending on moisture content, with a maximum moisture content of <0.20%. For Processing Injection molding, a melt temperature between 200-240°C and a mold temperature between 50-80°C is recommended. Additionally, it should be stored dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® ABS A 1000/100 is a heat-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer with medium viscosity and a maximum moisture content of 0.20%. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C. Typical applications include housings and injection molded parts for various market segments, such as domestic appliances and electrical and electronic (E&E). Pre-drying Conditions should be 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content. The product should be stored in a dry and light-protected environment, not exceeding 30°C. It is important to adhere to the recommended pre-drying and storage conditions to ensure optimal performance of the product.

MOCOM Compounds ALCOM® MED PS 1000 AS 14115 has a minimum shelf life of 24 months. It is based on a polystyrene impact polymer and contains an antistatic and permanent filler/additive system. It is designed for medical and personal care applications such as housings and is processed by injection molding with a melt temperature of 180-260°C and a mold temperature of 10-70°C. To ensure optimal performance, pre-drying conditions should be conducted in an air circulating dryer at 60-80°C for 2-3 h or in a dry air (dessiccant) dryer at 60-80°C for 2-3 h, depending on moisture content.

MOCOM Compounds ALTECH® ABS A 1000/530 is a copolymer of acrylonitrile/butadiene/styrene that has high surface gloss, slip agent, easy flow, injection molding grade, and antistatic properties. It can be used in various injection molded parts. To ensure optimal performance, pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-4 hours, or 80°C in an air circulating dryer for 3-6 hours depending on moisture content, with a maximum moisture content of 0.20%. Processing injection molding should be done with a melt temperature of 200-240°C and a mold temperature of 50-80°C. For best results, store in a dry location, protected from light, at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALTECH® ABS A 1000/100 GY1079-19 is a heat and processing stabilized Acrylonitrile/Butadiene/Styrene/Copolymer (ABS) polymer with an antioxidant filler/additive system, suitable for the production of various injection molded parts for a variety of markets and applications. The recommended melt temperature for injection molding is 200-240°C and the mold temperature should be 50-80°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® AWL 15/1 WT1471-04LB is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer blend containing 15% special filler, which is highly reflective and opaque. It is designed for applications in the automotive and various market segments, such as lighting and light blocking components, light guides, and reflectors. The material should be processed using injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. It should not exceed a maximum moisture content of 0.02%.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds ALTECH® ABS A 1000/172 UV is a acrylonitrile/butadiene/styrene/copolymer with good flow, processing stabilized and UV stabilized, suitable for information technology, electrical and electronic and telecommunications applications including display elements, keyboards, and other various applications. For processing, injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C is recommended. Pre-drying conditions should be 80°C in an air circulating dryer for 3-6 hours or 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.20%.

MOCOM Compounds ALTECH® ABS FC 1000/106 BK1280-05 is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized and injection molding grade features. It has a maximum moisture content of less than 0.20%. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content. This material can be used in various markets, such as the food processing industry, and is suitable for applications such as domestic appliances and injection molded parts with food contact. It is ideal for food industry applications that require a low absorption rate.

MOCOM Compounds ALCOM® MED PS 1000 14113 is a polystyrene with a minimum shelf life of 24 months and is suitable for injection molded parts such as housings. The melt temperature for injection molding should be 180-260°C, and the mold temperature should be 10-70°C.

MOCOM Compounds ALCOM® MED PS 1000 04002 is a polystyrene base polymer with a minimum shelf life of 24 months. For processing injection molding, the melt temperature should be 180-260°C and the mold temperature should be 10-70°C. It can be used for various applications.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.

MOCOM Compounds ALTECH® ABS A 1000/180 is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer with special features of injection molding grade and easy release (demolding). It has a maximum moisture content of <0.20%. For processing injection molding, the melt temperature should be between 200-240°C and the mold temperature should be between 50-80°C. This product is suitable for automotive, medical/personal care, and various other market segments and is recommended for applications such as domestic appliances, household goods, interior decoration/finishing, dashboard/instrument panels, impact protection/shock absorbers, and various other typical applications.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALTECH® ABS A 1000/170 is a copolymer of Acrylonitrile/Butadiene/Styrene with good flow and processing stability, suitable for injection molding at melt temperatures of 200-240°C and mold temperatures of 50-80°C. It is used in a variety of applications such as electrical and electronic, building and construction, Medical/Personal Care, ducting/piping systems, domestic appliances, valve components, housings, printer housings, paper dispensers, and operating elements.

MOCOM Compounds ALTECH® ABS A 1000/566 is a high heat stabilized, low gloss Acrylonitrile/Butadiene/Styrene/Copolymer suitable for injection molded parts, clothing, and fasteners in the automotive market. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content, with a maximum moisture content of 0.20%. The melt and mold temperatures for processing injection molding should be 200-240°C and 50-80°C respectively. Care should be taken to ensure that the temperature is not exceeded during processing.

MOCOM Compounds ALTECH® ABS A 1000/907 is an acrylonitrile/butadiene/styrene/copolymer base polymer with high surface quality, easy flow, and injection molding grade. It is suitable for pre-drying conditions at 80°C in a dry air (dessiccant) dryer for 2-4 hours, 80°C in an air circulating dryer for 3-6 hours depending on moisture content (maximum moisture content <0.20%). Processing should be done using injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C. Typical applications include housings and gardening tools for injection molded parts.

MOCOM Compounds ALTECH® ABS A 3230/516 GK20 GF10 is a black, impact-modified, high-stiffness, and processing-stabilized acrylonitrile/butadiene/styrene/copolymer containing 30% glass fibers/glass beads. For injection molding, the suggested melt temperature is between 220-260°C and the mold temperature should be between 50-80°C. This material is suitable for various injection-molded parts and has numerous applications in multiple market segments.

MOCOM Compounds ALCOM® AWL 15/1 UV WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of 15% special filler. It is highly reflective, opaque, and UV stabilized, used in the automotive and lighting markets for applications such as light guides and reflectors. Processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. This product should be stored in a dry, light-protected environment.

MOCOM Compounds ALTECH® PS-HI A 1000/901 GN1232-20 is a base polymer of Polystyrene with impact and special features of easy release (demolding) and injection molding grade, suitable for applications such as injection molded parts, bezels, and housings in the automotive, electrical and electronic, and building and construction market segments. Pre-drying conditions should be in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, and in an air circulating dryer at 60-80°C for 2-3 hours. Processing Injection molding should be done at a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds ALTECH® ABS A 1000/187 is an Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized, and injection molding grade features. It is suitable for various injection molded parts applications and has a maximum moisture content of <0.20%. For processing injection molding, the melt temperature should be between 200-240°C and the mold temperature should be between 50-80°C. Additionally, it should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® CFX ABS 1000 18037 SV1035-18MC is a pre-dried acrylonitrile/butadiene/styrene/copolymer with a metallic effect that is used for injection molded parts such as housings and bezels. It is suitable for electrical and electronic, building and construction, and sport and leisure applications. Pre-drying conditions are 80°C in a dry air dessiccant dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C. It is important to protect the material from light and store it in a dark, dry place.

MOCOM Compounds ALTECH® SAN A 1000/587.01 is a Styrene/Acrylonitrile/Copolymer that has improved stress cracking resistance, good chemical resistance, high stiffness, high surface gloss, easy release (demolding), and good flow. It is suitable for various applications and should be stored dry and protected from light at temperatures not exceeding 30°C. The recommended processing injection molding temperature range is 210-260°C for the melt and 40-80°C for the mold.

MOCOM Compounds ALCOM® MED PS 1000 19041 is a polystyrene injection molding grade suitable for medical and personal care applications, with a minimum shelf life of 24 months. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. It is typically used for manufacturing housings and other medical devices.

MOCOM Compounds ALTECH® PS-HI A 1000/100 is a Polystyrene-based injection molding grade with high impact properties and is suitable for applications such as light switches, functional components and various fixtures/fittings in market segments such as lighting, packaging, and various. Pre-drying conditions vary depending on moisture content, but can include a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. For optimal results, it should be stored in a dry place, protected from light, and not above 30°C.

MOCOM Compounds ALCOM® ABS 530/22 SV1287-04MCS is a Base Polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect color. It has good flow and is typically used to make housings for domestic appliances. Pre-drying Conditions include 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content. For processing Injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C.

MOCOM Compounds ALTECH® ABS A 1000/627 UV is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with special features such as high heat stabilization, good flow, processing stabilization, injection molding grade, low emission, and UV stabilization. It is used for injection molded parts in various market segments with excellent performance.

MOCOM Compounds ALTECH® ABS A 1000/106 YL1248-05LS is an Acrylonitrile/Butadiene/Styrene/Copolymer pre-dried with 80°C in an air circulating dryer for 3-6 h or 80°C in a dry air (dessiccant) dryer for 2-4 h depending on the moisture content, with a maximum moisture content of <0.20%. It is an easy flow, injection molding grade laser etchable (dark etching) polymer suitable for various electrical and electronic applications such as domestic appliances and various injection molded parts. For optimal processing conditions, it should be processed with a melt temperature of 200-240°C and a mold temperature of 50-80°C. Cooling time should also be considered for proper molding of the parts.

MOCOM Compounds ALTECH® PS-HI A 1000/902 WT1223-20 is a polystyrene-based injection molding grade with easy release (demolding) properties and impact resistance, ideal for use in the automotive, electrical and electronic, and machinery markets. For processing, injection molding should be used with a melt temperature of 180-260°C and a mold temperature of 10-70°C. Typical applications include bezels, profiles, and housings. This product should be stored in a dry, light-protected environment.

MOCOM Compounds Alcom® CFX ABS 1000 16012 SV1017-16MC is a metallic-effect acrylonitrile/butadiene/styrene copolymer base polymer, designed for injection-molded parts, particularly housings. Prior to processing, it requires pre-drying in a dry air (dessiccant) dryer at 80°C for 2-4 hours or in an air circulating dryer for 3-6 hours, depending on the moisture content.

MOCOM Compounds ALTECH® PS A 1000/920 UV NC0001-00 is a Polystyrene base polymer with special features of easy release (demolding) and UV stabilization. It is suitable for extruded parts, injection molded parts and exterior parts, and is commonly used in the Automotive, electrical and electronic, and Machinery market segments. Pre-drying conditions should be carried out in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be carried out with a melt temperature of 180-260°C, and a mold temperature of 10-70°C.