Products

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1416-04LD is a polycarbonate base polymer with a special filler and additive system that is UV stabilized and features translucent, light scattering, and easy flow properties. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds ALCOM® PC 740/30 UV FR WT1030-08LD is a polycarbonate base polymer with special filler, flame retardant, halogen and phosphorus free, UV stabilized, with light scattering, extrusion grade and suitable for injection molding. It is used for light transparent components in the automotive, lighting, electrical and electronic market segments, such as lamp covers, display elements and operating elements.

MOCOM Compounds ALCOM® LD PC 1000 UV 15112 GY1027-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features translucent, light scattering, high light diffusion, and good flow properties. It is suitable for use in automotive and lighting market segments and is typically used for display elements, operating elements, and light transparent components. It has approvals of GS93016 and is suitable for injection molding using a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16042 WT1048-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering, high light diffusion, and good flow. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016.

MOCOM Compounds ALCOM® PC 730/5 UV WT1231-10LDX is a polycarbonate extrusion grade that is UV stabilized and contains a special filler. It is translucent, light scattering, and has high light diffusion, making it ideal for use as lamp covers and other light transparent components in automotive and lighting applications. The melt temperature for extrusion should be in the range of 240-280°C.

MOCOM Compounds ALCOM® PC 740/4 CC1121-05LD is a polycarbonate base polymer containing a special filler/additive system for light scattering, high light transmission, and easy flow. It is approved for GMW15702 and GS93016, and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C. To ensure optimal performance, the product should be stored in a dry place, away from light.

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17132 WT1125-17 is a polycarbonate base polymer with a special filler/additive system, designed for the Automotive and Lighting market segments. It is typically used for lamp covers, display elements, and operating elements, and has GS93016 approvals. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1104-20 is a polycarbonate-based polymer with a special filler and UV stabilized additive system, suitable for automotive and lighting applications. It is used for creating light transparent components and black panel technology, with typical applications including display elements and operating elements.

MOCOM Compounds ALCOM® PC 740/4 CC1084-07LD is a polycarbonate base polymer with a special filler/additive system designed for light scattering and high light diffusion. It is commonly used in applications such as lamp covers, display elements, and operating elements in the automotive and lighting markets. The injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C. It has also been approved by GS93016.

MOCOM Compounds ALCOM® MS PP 1000 IM GY1153-20 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has high light transmission, light scattering, and easy flow. It is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements and has been approved by GS93016. For injection molding processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1217-10LD3 is a polycarbonate base polymer filled with a special filler that offers light scattering and high light diffusion. It is mainly used in the automotive and lighting industry for applications such as lamp covers, display components, and operating elements. To pre-dry the polymer, it should be kept at 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, ensuring a moisture content of less than 0.02%. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® AWL 10/3 WT1308-05LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer that is opaque, highly reflective, heat stabilized, and has easy flow. It is suitable for markets such as Automotive and various application areas like lighting and light blocking components. Typical applications include light guides and reflectors.

MOCOM Compounds ALCOM® PP 620/1 MR40 WT1034-05LB is a polypropylene homopolymer pre-dried using a dry air (dessiccant) dryer or an air circulating dryer at 80-100°C for 2-4 hours, with a maximum moisture content of <0.02%. It features 40% special filler, providing a highly reflective, opaque material. It is commonly used for light guides, reflectors, and light blocking components in the automotive and lighting markets. It is processed through injection molding with a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1415-04LD is a polycarbonate injection molding grade with a special filler/additive system that is translucent, light scattering, processing stabilized, UV stabilized, and approved by GS93016. It is designed for pre-drying conditions of 120°C in a dry air (desiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h, with a maximum moisture content of <0.02%. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements. The processing injection molding melt temperature should be 270-310°C, and the mold temperature should be 80-110°C.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® PC 740/4 UV WT1102-04LD is a special filler base polymer polycarbonate that is UV stabilized, has light scattering, high light transmission, and easy flow properties. It is GS93016 approved and is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16156 GY1118-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features the properties of being translucent, light scattering, high light diffusion, and having good flow characteristics. It is approved by GS93016 and is suitable for Automotive and Lighting market segments, with typical applications such as lamp covers, display elements, and operating elements. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature should be 80-110°C. When storing this material, it should be kept dry and protected from light.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds ALCOM® PC 740/4 UV CC1174-13LD is a polycarbonate base polymer with a special filler/additive system that is UV-stabilized and has high light transmission, light scattering, and high light diffusion. It is suitable for applications such as lamp covers, display elements, and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALTECH® PP-H A 3020/100 GB20 is a Polypropylene Homopolymer with 20% glass beads, heat stabilized, easy release (demolding), and processing stabilized. It is suitable for building and construction, automotive, packaging, and injection molded parts, exterior parts, clothing/fasteners, and interior decoration/finishing applications. Pre-drying conditions are in a dry air (dessiccant) dryer 80-120°C for 2-3 hours, or an air circulating dryer 80-120°C for 2-4 hours. Processing Injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be dry and stored in a cool place, not above 30°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17002 WT1002-17 is a polycarbonate-based material containing a special filler/additive system. It is UV stabilized and has light scattering and high light transmission properties. It has good flow, making it suitable for injection molding with a melt temperature between 270-310°C and a mold temperature between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1082-08LD2 is a polycarbonate-based polymer with a special filler/additive system that is UV stabilized, translucent, light-scattering, and has high light diffusion and good flow. It is typically used in automotive and lighting applications for lamp covers, display elements, and operating elements. It has been approved by GMW15702, GM3013, and GS93016 and should be processed using injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC+AWL 750/15.1 WT1378-04LB is a polycarbonate + acrylonitrile butadiene styrene blend with a special filler that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for lighting and light blocking components such as light guides and reflectors. The pre-drying conditions should include a dry air (dessiccant) dryer at 100-110°C for 2-4 hours, and an air circulating dryer at 100-110°C for 4-8 hours, with a maximum moisture content of <0.02%.

MOCOM Compounds ALTECH® PC-HT A 1000/500 is a high heat polycarbonate with special features that make it suitable for automotive and lighting applications. It should be stored in a dry and protected environment at a temperature not exceeding 30°C. The recommended processing injection molding temperatures are a melt temperature of 320-340°C and a mold temperature of 100-130°C. Typical applications include housings and light switches.

MOCOM Compounds ALCOM® PC 740/4 CC1119-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light transmission, and good flow. It has been approved by GS93016 and is suitable for the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C is required.

MOCOM Compounds ALCOM® LD2 PC 1000 14008 WT1011-14 is a polycarbonate base polymer with special features of being translucent, light scattering, high light diffusion, and easy flow. It is designed for automotive, lighting, and interior decoration/finishing applications such as lamp covers, display elements, and operating elements. It is approved by GS93016 and is processed by injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission, and chemically coupled. It is part of the Automotive market segment and is used to make profiles and bezels. It should be stored in a dry and light-protected environment at not more than 30°C.

MOCOM Compounds ALCOM® LD2 PC 1000 17059 GY1051-17 is a polycarbonate-based polymer containing a special filler and additives, providing high light transmission and light scattering. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved under GS93016.

MOCOM Compounds ALCOM® PC 740/4 GY1320-04LD is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, and high light diffusion properties, as well as good flow. It is approved by GS93016 and is suitable for use in automotive and lighting applications such as lamp covers, display elements, and operating elements. Processing injection molding temperature ranges from 270-310°C, with a mold temperature of 80-110°C. To ensure proper performance, this material must be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17090 WT1087-17 is a polycarbonate base material with a special filler/additive system that is UV stabilized and provides light scattering and high light transmission. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016. For pre-drying, conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours or in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should occur at a melt temperature of 270-310°C and a mold temperature of 80-110°C.