WIC PA6 15 BK

Identification & Functionality

Chemical Family

Polyamides

Fillers Included

Carbon Fiber

Polymer Name

Polyamide 6 (PA 6)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Labeling Claims

PFOA-free,

PFOS-free,

Persistent Organic Pollutants (POP)-free

Materials Features

Heat Aging Resistant,

Medium Viscosity

Applications & Uses

Markets

Consumer Goods

Applications

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Automotive Applications,

Sporting Goods

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Black

Mechanical Properties

	Value	Units	Test Method / Conditions
Flexural Modulus (Dry)	10100.0	MPa	ISO 178
Flexural Strength (Dry)	245.0	MPa	ISO 178
Tensile Modulus (Dry)	12000.0	MPa	ISO 527
Tensile Modulus (Conditioned)	6000.0	MPa	ISO 527
Tensile Strength (Dry)	160.0	MPa	ISO 527
Tensile Strength (Conditioned)	95.0	MPa	ISO 527
Tensile Elongation at Break (Dry)	2.6	%	ISO 527
Tensile Elongation at Break (Conditioned)	6.0	%	ISO 527
Impact Strength (Dry, Charpy, at 23°C)	48.0	kJ/m²	ISO 179/1eU
Impact Strength (Conditioned, Charpy, at 23°C)	68.0	kJ/m²	ISO 179/1eU
Notched Impact Strength (Dry, Charpy, at 23°C)	6.0	kJ/m²	ISO 179/1eA
Notched Impact Strength (Conditioned, Charpy, at 23°C)	10.0	kJ/m²	ISO 179/1eA

Physical Properties

	Value	Units	Test Method / Conditions
Density (Dry)	1200.0	kg/m³	ISO 1183
Global Warming Potential (GWP)	5.91	kg CO₂ eq.	ISO 14040, 14044

Thermal Properties

	Value	Units	Test Method / Conditions
HDT / A (Dry, 1.8 MPa)	206.0	°C	ISO 75-1/-2
DSC (Melt Point, Dry)	220.0	°C	ISO 11357-1/-3

Typical Properties

	Value	Units	Test Method / Conditions
Moisture Content	max. 0.12	%	-

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistance (Conditioned)	max. 161	Ohm	IEC 62631-3-2
Specific Volume Resistance (Dry)	1.61	Ohm*m	IEC 62631-3-1

Processing Information (Injection Molding)

	Value	Units	Test Method / Conditions
Melt Temperature	250 - 270	°C	-
Mould Temperature	60 - 100	°C	-

Rheological Properties

	Value	Units	Test Method / Conditions
Melt Index (MVR, Dry)	80.0	cm³/10min	ISO 1133
MVR Temperature (Dry)	275.0	°C	-
MVR Load (Dry)	5.0	kg	-
Molding Shrinkage (parallel, Dry)	0.2	%	ISO 294-4, 2577
Molding Shrinkage (normal, Dry)	0.5	%	ISO 294-4, 2577

Injection Moulding Processing Conditions

Under certain conditions the increased thermal conductivity must be considered.

Regulatory & Compliance

Certifications & Compliance

IATF 16949,

ISO 13485,

ISO 14001,

ISO 17025,

ISO 45001,

ISO 50001,

ISO 9001,

RoHS Compliant

Technical Details & Test Data

Pre-Drying Conditions

• 80°C in a dry-air dryer for 2-8h
• Dependant on moisture content

Storage & Handling

Storage Conditions

Store in dry, protected from light.