Products

MOCOM Compounds ALTECH® PP-B A 2020/150 GF20 CP is a heterophasic copolymer of polypropylene with 20% glass fibers that is chemically coupled, processing stabilized, and heat stabilized. It is suitable for applications in the machinery, automotive, sport, and leisure sectors, such as injection molded parts, interior decoration/finishing, sports equipment, and exterior parts. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALFATER® XL A70I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It is suitable for a variety of market segments such as automotive, building and construction, electrical and electronic, sport and leisure, and furniture. Typical applications of this product include seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, casters, and 2K components. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber. Additionally, it has a service temperature range of -40-125°C.

MOCOM Compounds ALTECH® PP-H B 2012/500 GF12 is a Polypropylene Homopolymer pre-dried in an air circulating dryer or in a dry air (dessiccant) dryer. The melt temperature for processing injection molding is 200-250°C and the mold temperature is 20-70°C. The filler/additive system is 12% glass fibers, chemically coupled, heat stabilized, with an easy release (demolding) and slip agent. The market segment for this material is Furniture, building and construction, sport and leisure, and various. The application area is for household goods and domestic appliances and the typical applications are furniture profile and racking/shelving.

WIC PA66 30 BK EF is a polyamide 66 base polymer with 30% carbon fiber filler and black color, specially designed for easy flow and heat aging stabilization. It is mainly used in the automotive and sport market segments. Processing conditions include injection molding with a melt temperature of 280-300°C and a mold temperature of 80-120°C. Under certain conditions, increased thermal conductivity must be considered. To ensure optimal performance, it should be stored in a dry, light-protected environment.

MOCOM Compounds ALFATER® XL A60I 3EF0010 is a black thermoplastic vulcanisate (PP+EPDM) designed for injection molding. It has a melt temperature of 190-220°C, mold temperature of 10-60°C, and injection speed of middle to high. It has back pressure of >3 bar and a holding pressure of 50-70% of the injection pressure. It is easy to flow, has a high surface quality, and is weather-resistant, chemical-resistant, ozone-resistant, hot air and hydrolysis resistant. Its market segment is automotive, building and construction, electrical and electronic, sport and leisure, and furniture, and its application areas are seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PA6 A 2003/712 GF3 IM UV is a polyamide 6 with a 3% glass fiber filler/additive system. It has been impact modified, fast solidifying, has easy demolding and is UV and processing stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C and is used in the automotive, machinery, building and construction and sport and leisure market segments. Typical applications include functional components and it should be stored dry, protected from light and not above 30°C.

WIC PP 15 N is a base polymer of Polypropylene reinforced with 15% carbon fiber in natural (carbon optic) color. It features heat aging stabilization, making it suitable for automotive, sport and other markets. The pre-drying conditions require it to be heated to 80°C in an air circulating dryer for 2-4h, dependent on the moisture content, with a maximum moisture content of 0.10%. The processing conditions require injection molding with a melt temperature between 210-260°C, and a mold temperature between 30-60°C. Under certain conditions, the increased thermal conductivity must also be taken into consideration for optimal performance.

MOCOM Compounds ALCOM® HM PA6 1000 AG UV 15046 WT1077-15 is a pre-dried polyamide 6-based material with an additive system containing a hygienic material and light stabilizer. It is white in color, similar to RAL 9003 and RAL 9016, and has antibacterial properties according to ISO 22196. This material is suitable for use in personal care, household goods, furniture, building and construction, and sport and leisure applications. When processing with injection molding, the recommended melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

WIC PP 30 N is a natural (carbon-optic) material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 30% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, and the mold temperature should range from 30 to 60°C.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

WIC PP 20 N is a polypropylene with 20% carbon fiber filler, suitable for use in the automotive and sports markets. Prior to processing, the material must be dried in an air-circulating dryer at 80°C for 2-4 hours, with a maximum moisture content of 0.10%. During processing, injection molding is recommended with a melt temperature range of 210–260°C and a mold temperature range of 30–60°C. The material comes in a natural color with a carbon optic and has heat-age stabilization as its special feature.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

WIC PA6 15 BK IM is a heat aging stabilized, impact modified Polyamide 6 base polymer with 15% carbon fiber filler in black color, suitable for Automotive and Sport market segments. Its pre-drying conditions are 80°C in a dry-air dryer for 2-8h, depending on moisture content up to 0.12% max. moisture content. The processing conditions are injection molding with melt temperature 250-270°C and mold temperature between 60-100°C. The increased thermal conductivity must be considered under certain conditions. It should be stored in a dry, light-protected environment and used within six months after opening the package.

WIC PP 10 BKD is a polypropylene-based material with 10% carbon fiber filler and a deep black color. It is suitable for injection molding with a melt temperature range of 210-260°C and a mold temperature range of 30-60°C. It has heat aging stabilization and is ideal for the Automotive and Sport markets. Additionally, under certain conditions, the increased thermal conductivity must be taken into account.

WIC PP 40 N is a natural-colored material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C. It is important to note that the increased thermal conductivity of this material must be taken into account when selecting the parameters for injection molding.

WIC PP 10 N is a polypropylene-based polymer filled with 10% carbon fiber and colored naturally (carbon optic). It is suitable for injection molding with a melt temperature range of 210-260°C and a mold temperature range of 30-60°C. It is used in the automotive and sport markets, and features heat aging stabilization. Under certain conditions, the increased thermal conductivity must also be taken into consideration.

WIC PP 15 BK is a polypropylene base polymer filled with 15% carbon fiber and colored black. Its processing conditions involve injection molding with a melt temperature of 210-260°C and a mold temperature of 30-60°C. It has special features such as heat aging stabilization and is suitable for the Automotive and Sport market segments. Under certain conditions, the increased thermal conductivity needs to be considered.

WIC PP 20 BK LE is a black polypropylene-based composite with 20% carbon fiber filler. It has low emissions and is heat-age stabilized. The material requires pre-drying at 80°C for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.10%. Injection molding is the recommended processing method, with a melt temperature range of 210–260°C and a mold temperature range of 30–60°C. The material is well-suited for use in the automotive and sports industries.

WIC PP 30 BK LE is a black polypropylene material with 30% carbon fiber filler that is suitable for injection molding with a melt temperature range of 210–260 °C and a mold temperature range of 30–60 °C. Pre-drying is required at 80°C for 2-4 hours with a maximum moisture content of 0.10%. The material has low emission and heat-age stabilization properties and is suitable for use in the automotive and sports market segments.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALFATER® XL A90I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding applications. It comes in natural color, bright inherent color, and black and has low emission, good colorability, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air and hydrolysis resistance. It can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and casters and has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® CFX PBT 1000 16072 is a polybutylene terephthalate with a metallic effect and is used in applications such as housings, bezels, and injection molded parts in the electrical and electronic, building and construction, and sport and leisure markets. For proper use, it must be pre-dried in a dry air (dessiccant) dryer at 100-120°C for 2-4 h, or in an air circulating dryer at 100-120°C for 4-8 h depending on moisture content. Injection molding should be done by melting the material at 250-270°C and molding at 60-100°C. To ensure optimal performance, it should be stored in a light-protected environment and used within a reasonable time.

MOCOM Compounds ALPERFORM® ABS AS A 0031-05 is a dosage of 5% extrusion and 5% injection molding dependent on application and operational area. The base polymer is Acrylonitrile/Butadiene/Styrene/Copolymer and the filler/additive system is antistatic - short term. It is suitable for use in Acrylonitrile/Butadiene/Styrene/Copolymer and is ideal for market segments such as automotive, electrical and electronic, building and construction, sport and leisure, and domestic appliances. It can be applied for both injection molded and extruded parts.

MOCOM Compounds ALCOM® CFX ABS 1000 18037 SV1035-18MC is a pre-dried acrylonitrile/butadiene/styrene/copolymer with a metallic effect that is used for injection molded parts such as housings and bezels. It is suitable for electrical and electronic, building and construction, and sport and leisure applications. Pre-drying conditions are 80°C in a dry air dessiccant dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C. It is important to protect the material from light and store it in a dark, dry place.

WIC PP 30 BK IM1 is a black polypropylene compound with 30% carbon fiber filler. It is suitable for injection molding and must be dried at 80°C for 2-4 hours prior to processing to achieve a moisture content of 0.10% maximum. The recommended melt temperature range is between 210 and 260°C, with a mold temperature of 30 to 60°C. The material has been formulated with heat stabilization and impact modification, making it a suitable choice for use in automotive and sports applications. It is also resistant to wear and tear and has a good surface finish.

MOCOM Compounds ALFATER® XL A75I 4GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material that features low emission, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It can be used in injection molding, with melt temperatures between 190-220°C, mold temperatures of 10-60°C, injection speed of middle to high, and back pressure of greater than 3 bar. It is suitable for use in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications, such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, 2K components, and casters. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber, and has a service temperature range of -40-125°C.

MOCOM Compounds ALCOLOR® PBT A BK979-3116 is a black colorant, similar to RAL 9004, for use in Polybutylene Terephthalate. It has a dosage of 5% extrusion and 5% injection molding, dependent on wall thickness and required color intensity, as well as the application and operational area. It has a light fastness colorant of blue woolscale 8 and must be pre-dried with a maximum moisture content of <0.04%. Furthermore, it has a high additive content, is free from cadmium, lead and diarylide pigments, has high dispersibility, and is dust-free. It is suitable for use in automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure applications.

WIC PP 15 BK LE is a high-performance, black-colored material specifically designed for use in the automotive and sports industries. Its base polymer is polypropylene, reinforced with 15% carbon fiber to provide excellent strength and stiffness. This material has low emissions and heat aging stabilization, making it ideal for use in demanding environments. It can withstand high temperatures and remain stable throughout the production process, making it a reliable choice for these industries.

WIC PP 40 BK UV is a black material with UV and heat age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C.

WIC PP 20 BK LE2 is a black polypropylene-based thermoplastic composite with 20% carbon fiber filler. It is suitable for injection molding, with a melt temperature range of 210–260 °C and a mold temperature range of 30–60 °C. Pre-drying is required at 80°C in an air-circulating dryer for 2-4 hours, depending on the moisture content, which should not exceed 0.10%. The material is UV- and heat-stabilized and has low emissions. It is primarily intended for use in the automotive and sports markets and offers excellent dimensional stability.

WIC PP 20 BK is a polypropylene based polymer filled with 20% carbon fiber and colored black. It is designed for use in injection molding with a melt temperature between 210-260°C and a mold temperature between 30-60°C. The product is heat aging stabilized and is suitable for use in the automotive and sport market segments. Under certain conditions, the increased thermal conductivity should be taken into account.

MOCOM Compounds ALCOM® ABS 530/50 HM is a white, pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with a hygienic filler/additive system and antibacterial properties according to ISO 22196. It has a melt temperature range of 220-260°C and a mold temperature range of 50-80°C. This product is suitable for injection molded parts such as sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings, and is used for applications in the packaging, personal care, household goods, furniture, building and construction, and sport and leisure markets. For optimal results, it should be stored in a dry, light-tightly sealed environment.

MOCOM Compounds ALFATER® XL A40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding. It has a melt temperature of 190-220°C and a mold temperature of 10-60°C with injection speed in the middle to high range, back pressure (hydraulic) greater than 3 bar and a holding pressure of 50-70% of injection pressure. It has a natural color with bright inherent color and is low emission, with good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets, and can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and two-component components.