Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 27000.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 340.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 30000.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 18000.0 | MPa | ISO 527 |
| Tensile Strength (Dry) | 225.0 | MPa | ISO 527 |
| Tensile Strength (Conditioned) | 160.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 1.2 | % | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 2.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 60.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | 44.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Notched Impact Strength (Conditioned, Charpy, at 23°C) | 9.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1330.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 4.54 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 257.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 260.0 | °C | ISO 11357-1/-3 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.12 | % | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistance (Conditioned) | max. 10 | Ohm | IEC 62631-3-2 |
| Specific Volume Resistance (Dry) | 0.1 | Ohm*m | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 280 - 300 | °C | - |
| Mould Temperature | 80 - 120 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR, Dry) | 7.0 | cm³/10min | ISO 1133 |
| MVR Temperature (Dry) | 300.0 | °C | - |
| MVR Load (Dry) | 1.2 | kg | - |
| Molding Shrinkage (parallel, Dry) | 0.1 | % | ISO 294-4, 2577 |
| Molding Shrinkage (normal, Dry) | 0.5 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in a dry-air dryer for 2-8h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.