Products

MOCOM Compounds ALTECH® ABS A 1000/670 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability. It is suitable for processing in injection molding with melt temperatures of 200-240°C and mold temperature of 50-80°C, and is suitable for applications in Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene products, and various injection molded parts. Pre-drying Conditions are 80°C in an air circulating dryer for 3-6 h, 80°C in a dry air (dessiccant) dryer for 2-4 h depending on moisture content with a maximum moisture content of <0.20%. To ensure the best results, it should be stored in a dry and light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 2020/550 GF20 CP is a polypropylene heterophasic copolymer pre-dried with a dessiccant dryer at 80-120°C for 2-3 h or an air circulating dryer at 80-120°C for 2-4 h and with a filler/additive system of 20% glass fibers. Processing with injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material has special features such as being chemically coupled, UL-listed, having slip agent, being processing stabilized, having easy release (demolding), being heat stabilized and being suitable for the building and construction, machinery and automotive market segments. Typical applications include housings, fixing elements, and functional components. For optimal performance, this material should be stored in darkness and at not above 30°C.

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

MOCOM Compounds ALTECH® PP-H A 1000/546 FR is a flame retardant polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C. It is known for its easy flow, easy release (demolding), and heat stabilized properties. It is commonly used in the electrical and electronic, building and construction market segments for injection molded parts, electrical components, and clothing/fasteners, with typical applications including fixing elements, functional components, and housings.

MOCOM Compounds ALTECH® PA6 A 1000/320 UV is a Polyamide 6-based polymer with UV stabilization, used for injection molded parts, functional components, and housings. It should be stored in a dry, light-protected environment, not above 30°C. Pre-drying Conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content, with a maximum moisture content of <0.15%. Processing Injection molding should involve a melt temperature of 250-270°C and a mold temperature of 40-80°C. Its target market segments are Automotive, Machinery, Electrical and Electronic, Building and Construction, and Sport and Leisure.

MOCOM Compounds ALCOM® CFX ABS 1000 UV 16002 GY1001-16MCS is a UV stabilized Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect. It is suitable for injection molded housings and should be pre-dried by 80°C in a dry air (dessiccant) dryer for 2-4 hours, or 80°C in an air circulating dryer for 3-6 hours depending on moisture content. The melt temperature for processing should be between 220-260°C and the mold temperature should be between 50-80°C. Additionally, it should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® PC 740/1.1 CF20 is a polycarbonate base polymer filled with 20% carbon fibers that is electrically conductive, has reduced surface resistivity, high stiffness, and is heat stabilized. It is suitable for use in machinery and various other market segments, and is typically used in the injection molding of housings, functional components, and protection caps. To ensure optimal performance, pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of <0.02%. The melt temperature for injection molding should be between 290-330°C and the mold temperature should be between 80-130°C.

MOCOM Compounds ALCOM® ABS 530/3 GY31-749MCF is a pre-drying condition acrylonitrile/butadiene/styrene copolymer with a metallic effect, low tendency to flow lines, and easy flow. It is used in the market segments of electrical and electronic and building and construction, with typical applications such as housings and domestic appliances. It is processed using injection molding, with a melt temperature of 220-260°C and a mold temperature of 50-80°C. For optimum performance, it should be stored in a cool, dry place, away from light and not above 30°C.

MOCOM Compounds TEDUR® L 9409-3.2 is a Polyphenylene Sulfide base polymer containing 30% carbon fibers and 15% PTFE filler/additive system. It has reduced surface resistivity, is electrically conductive, and improved sliding/wear characteristics. It is used in the automotive, machinery, electrical and electronic market segment for functional components, housings, bearings and sliding elements. Pre-drying conditions require a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature greater than 140°C, with appropriate cooling times.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALTECH® PP-H A 2045/500 is a Polypropylene Homopolymer with 45% glass fibers, heat stabilized, extrusion grade, low emission, and processing stabilized. It is suitable for Pre-Drying Conditions in an air circulating dryer 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer 80-120°C for 2-3 h. Processing Injection molding is done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is used for building and construction, sport and leisure applications, such as functional components, housings, and sports equipment. It should not be exposed to strong UV radiation and should not be stored in direct sunlight.

MOCOM Compounds ALTECH® ECO PC 1000/128 UV is a UV-stabilized polycarbonate that has been pre-dried under 120°C in a dry air (dessiccant) dryer for 2-3 hours and in an air circulating dryer between 100-120°C for 4-12 hours, depending on the moisture content, with a maximum moisture content of less than 0.02%. It is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for exterior parts, light transparent components, injection molded parts, and various other lighting, electrical, and electronic applications such as lamp covers, housings, and more.

MOCOM Compounds Alcom® CFX ABS 1000 UV 17058 SV1049-17MC is a UV-stabilized acrylonitrile/butadiene/styrene copolymer base polymer that features a metallic effect. It is designed for injection-molded parts, particularly housings and clothing/fasteners. To maintain its properties, it should be stored in dry conditions and protected from light and UV radiation.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds ALCOM® PC 740/3162.1 CF10 GF10 TF10 is a polycarbonate base polymer with 10% glass fibers, 20% carbon fiber/PTFE filler/additive system. It is electrically conductive, has improved sliding/wear and high stiffness, and is used in the automotive and machinery market segments for applications such as housings and functional components. Pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer of 100-120°C for 4-12 hours, depending on moisture content, are required for processing. For injection molding, melt temperature should be set between 310-330°C and mold temperature should be set between 80-130°C.

MOCOM Compounds ALCOM® MED PS 1000 AS 14114 is a polystyrene impact resin with a permanent antistatic filler/additive system designed for Medical/Personal Care applications, suitable for injection molded parts such as housings. Its melt temperature should be between 180-260°C and its mold temperature should be between 10-70°C. Pre-drying should be done in an air circulating dryer at 60-80°C for 2-3 hours, or in a dry air (dessicant) dryer at 60-80°C for 2-3 hours, depending on the moisture content.

MOCOM Compounds ALCOM® PC 740/1 is a polycarbonate base polymer with 10% PTFE filler/additive system, which improves its sliding and wear features. It is used in the automotive and machinery industries for a variety of applications such as housings, functional components, bearings, and sliding elements. The maximum moisture content should not exceed 0.02%, and the melt temperature should be between 280-320°C, while the mold temperature should range from 80-130°C. Additionally, the material must be stored in a dry place, away from light.

MOCOM Compounds ALTECH® ECO PA6 4230/100.02 GF10 MR20 is a heat-stabilized polyamide 6 that contains 10% glass fibers and 20% mineral filler/additive system. It is recommended to pre-dry the material at 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on its moisture content, with a maximum moisture content of <0.15%. For injection molding, the melt temperature should be between 270-290°C, and the mold temperature should be between 80-100°C. Typical applications include engine covers and housings, which offer good flow, low warpage, and high surface quality.

MOCOM Compounds ALCOM® PC 740/1.1 CF10 PTFE15 is a base polymer of polycarbonate combined with 10% carbon fibers and 15% PTFE, providing improved sliding/wear, electrically conductive, and reduced surface resistivity features. It is commonly used in the automotive and machinery industries for housings, functional components, bearings, and sliding elements. For pre-drying, the material should be heated to 120°C in a dry air (dessiccant) dryer for 2-3 hours, depending on moisture content, with a maximum moisture content of 0.02%. Injection molding requires a melt temperature of 310-330°C and a mold temperature of 80-130°C.

MOCOM Compounds ALTECH® PP-B A 4815/510 MR15 IM is a polypropylene heterophasic copolymer that is processed by injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 15% chalk and has special features such as impact modification, injection molding grade, heat stabilization, easy release (demolding), and processing stabilization. It is used in electrical and electronic, automotive, and other applications such as electrical components, interior decoration/finishing, clothing/fasteners, functional components, fixing elements, and housings.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H A 3020/100 GB20 is a Polypropylene Homopolymer with 20% glass beads, heat stabilized, easy release (demolding), and processing stabilized. It is suitable for building and construction, automotive, packaging, and injection molded parts, exterior parts, clothing/fasteners, and interior decoration/finishing applications. Pre-drying conditions are in a dry air (dessiccant) dryer 80-120°C for 2-3 hours, or an air circulating dryer 80-120°C for 2-4 hours. Processing Injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be dry and stored in a cool place, not above 30°C.

MOCOM Compounds ALCOM® MED PS 2030 07001 is a base polymer with a minimum shelf life of 24 months. It is processed with injection molding, with a melt temperature of 180-260°C and a mold temperature of 10-70°C. It is composed of 30% glass fibers, is heat stabilized, and has easy release (demolding). It is used primarily in medical and personal care applications for injection-molded parts, such as housings.

MOCOM Compounds ALTECH® PP-H FC 4940/500 TV 40 is a polypropylene homopolymer pre-dried with a desiccant dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. It is suitable for applications in the packaging, building and construction markets, as well as food contact and toys, with typical applications including functional components and housings. To ensure optimal performance, it should be stored in a dry, light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 2030/157.01 GF30 is a polypropylene homopolymer pre-dried in an air circulating dryer at 80-120°C for 2-4 h or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h. It is processed through injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The material contains 30% glass fibers that are chemically coupled and heat stabilized, making it easy to flow. It is suitable for applications such as housings and fixing elements in the automotive, electrical and electronic, and machinery market segments, ensuring reliable performance.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALCOM® CFX ABS+PC 1000 UV 19004 is a modified Acrylonitrile/Butadiene/Styrene/Copolymer with polycarbonate and UV stabilized filler/additive system designed to give a special metallic effect and good flow. It is suitable for injection molding applications in the automotive, building and construction industries, and is used for housing and clothing/fastener applications.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.

MOCOM Compounds ALTECH® PP-B B 4020/506 MR20 is a polypropylene copolymer with 20% mineral filler/additive system featuring easy release (demolding), processing stabilized, heat stabilized, and easy flow properties. It is suitable for the packaging, building and construction market segments, and typical applications include housings, functional components, and fixing elements. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C.

MOCOM Compounds ALTECH® PC-HT A 1000/500 is a high heat polycarbonate with special features that make it suitable for automotive and lighting applications. It should be stored in a dry and protected environment at a temperature not exceeding 30°C. The recommended processing injection molding temperatures are a melt temperature of 320-340°C and a mold temperature of 100-130°C. Typical applications include housings and light switches.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALCOM® PC 740/1.1 CF30 is a polycarbonate base polymer with 30% carbon fibers that has special features of being electrically conductive and having reduced surface resistivity and high stiffness. It is typically used for injection molding parts such as housings and functional components. Its pre-drying conditions are 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of 0.02%. The melt temperature for injection molding is between 290-330°C, and the mold temperature is between 80-130°C. The product should be stored in a dry and light-protected environment. It is used in the Machinery market segment and should be handled with care to ensure the highest quality.

MOCOM Compounds ALTECH® PP-H A 4920/108 MR20 is a polypropylene homopolymer heat stabilized, easy release (demolding) and processing stabilized, suitable for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. It is suitable for automotive, electrical, and electronic applications like housings, functional components, interior decoration/finishing, and clothing/fasteners. To maintain its quality, keep it dry and protected from light at temperatures not exceeding 30°C. Pre-drying conditions should be in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or in an air circulating dryer at 80-120°C for 2-4 hours.