Products

MOCOM Compounds ALTECH® PP-H A 4920/200 TV20 is a Polypropylene Homopolymer base polymer pre-dried in a dry air (dessiccant) dryer or an air circulating dryer at temperatures of 80-120°C for 2-4 hours. It is then processed through injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It offers benefits such as 20% talcum, good flow, low warpage, easy release (demolding), and slip agent. This material is suitable for electrical and electronic, building and construction, and sport and leisure applications and is used for injection molded parts, interior decoration/finishing, clothing/fasteners, housings, functional components, and different automotive powertrain parts.

MOCOM Compounds ALTECH® PP-B B 4920/526 MR20 UV is a polypropylene heterophasic copolymer with a 20% talcum filler/additive system that is UV stabilized, heat stabilized, easy to release (demolding), and processing stabilized. It is typically used for housings, handles, functional components, fixing elements, and other interior, power tools, exterior parts, and electrical components in the automotive, machinery, sport and leisure, and electrical and electronic market segments. It has good mechanical and thermal properties, providing a good balance between stiffness and impact resistance.

MOCOM Compounds ALTECH® PP-B A 4930/506 TV30 is a heat stabilized polypropylene heterophasic copolymer with a 30% talcum filler/additive system. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, providing features such as easy release (demolding) and good flow. It is suitable for use in building and construction, as well as in sport and leisure applications, such as functional components, housings, fixing elements, and bezels. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours.

WIC PP 40 BKD is a deep black material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C.

MOCOM Compounds ALTECH® ECO PP-H 2020/W100.05 BK0002 is a polypropylene homopolymer filled with 20% glass fiber and colored black. It features processing stabilization and is suitable for market segments such as automotive and various. For pre-drying conditions, it should be heated in an air circulating dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.10%. For processing conditions, injection molding should be used with a melt temperature of 200-270°C and a mold temperature of 20-60°C.

MOCOM Compounds ALTECH® PP-H FC 4920/100 MR20 is a polypropylene homopolymer with 20% talcum filler/additive system. When processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. It is characterized by easy release (demolding), processing stabilization, and heat stabilization. It is mainly used for building and construction, packaging, injection molded parts, domestic appliances, and interior decoration/finishing, such as bezels, housings, and functional components.

WIC PP 20 BK LE2 is a black polypropylene-based thermoplastic composite with 20% carbon fiber filler. It is suitable for injection molding, with a melt temperature range of 210–260 °C and a mold temperature range of 30–60 °C. Pre-drying is required at 80°C in an air-circulating dryer for 2-4 hours, depending on the moisture content, which should not exceed 0.10%. The material is UV- and heat-stabilized and has low emissions. It is primarily intended for use in the automotive and sports markets and offers excellent dimensional stability.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds ALTECH® ECO PP-H 2030/156 CP GF30 is a Polypropylene Homopolymer with a 30% glass fibers filler/additive system that is chemically coupled, heat stabilized, and contains recycled material. Processing Injection molding can be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. Typical applications include various injection molded parts.

MOCOM Compounds ALTECH® PP-H A 2020/159 GF20 CP is a polypropylene homopolymer reinforced with 20% glass fibers. It is chemically coupled and offers high stiffness and high toughness. This material is suitable for use in automotive, building and construction, and other markets. It can be used for engine and drive systems, transport systems, and various injection molded parts such as housings and operating elements. To ensure peak performance, store it in a dry place, away from light, and not above 30°C.

MOCOM Compounds ALTECH® PP-H A 3030/100 is a polypropylene homopolymer with a 30% glass bead filler/additive system, specially designed for easy release (demolding) and slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C and can be used to create building and construction, sport and leisure applications, such as injection molded parts, interior and household goods, hygiene products, and housings. To ensure best results, pre-drying conditions should be in an air circulating dryer at 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h.

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® PP 620/8 GF30 PTFE15 is a heat-stabilized polypropylene homopolymer with a 30% glass fiber and 15% PTFE filler/additive system. It is used in the automotive and machinery market segments for various applications and should be pre-dried either in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours or in an air circulating dryer at 80-100°C for 2-4 hours, depending on the moisture content. Processing should be done with a melt temperature of 200-270°C and a mold temperature of 29-90°C.

MOCOM Compounds ALTECH® PP-H A 2040/159 GF40 CP is a polypropylene homopolymer suitable for injection molding with a melt temperature of 200-270°C and mold temperature of 20-90°C, containing 40 % glass fibers with special features such as chemical coupling, high toughness, and high stiffness. Typical applications are varied and it should be stored in a dry, dark place at a temperature no higher than 30°C. Ensure that it is well sealed to avoid contamination.

MOCOM Compounds ALTECH® PP-B A 2020/157 GF20 CP is a polypropylene heterophasic copolymer containing 20% glass fibers that is chemically coupled, processing stabilized, easy to release (demolding), and heat stabilized. It is typically used in building and construction for exterior parts such as air ducts and functional components. For optimal results, pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 h or in an air circulating dryer at 80-120°C for 2-4 h. For injection molding, the melt temperature should be set to 200-250°C and the mold temperature should be set to 20-70°C.

LUPOLEN KONZENTRAT AB 20 GF is a high-quality additive designed for use in polyethylene low density. It contains an anti-blocking agent and silica as a filler/additive system. The recommended dosage for extrusion is 3-5%. It is important to store this product in a dry place and protect it from light.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

WIC PP 15 N is a base polymer of Polypropylene reinforced with 15% carbon fiber in natural (carbon optic) color. It features heat aging stabilization, making it suitable for automotive, sport and other markets. The pre-drying conditions require it to be heated to 80°C in an air circulating dryer for 2-4h, dependent on the moisture content, with a maximum moisture content of 0.10%. The processing conditions require injection molding with a melt temperature between 210-260°C, and a mold temperature between 30-60°C. Under certain conditions, the increased thermal conductivity must also be taken into consideration for optimal performance.

MOCOM Compounds ALTECH® PP-B A 4930/507 MR30 is a Polypropylene Heterophasic Copolymer containing 30% talcum and is specially designed for building and construction, machinery, and household goods applications. It is highly heat stabilized and has easy release (demolding) and slip agent properties. Pre-Drying Conditions should be carried out in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding should be carried out at a melt temperature of 200-250°C and a mold temperature of 20-70°C. The product should be stored in a cool, dry place and should not be exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® NXT PP -H A 2035/752.02 GF35 CP UV is a polypropylene homopolymer with a 35% glass fiber filler/additive system that is chemically coupled, high heat stabilized, high stiffness, high toughness, UV stabilized, and heat stabilized. It is suitable for pre-drying conditions in an air circulating dryer at 80-120°C for 2-4 hours and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This product is suitable for use in the automotive market segment for various injection molded parts.

MOCOM Compounds ALTECH® PP-H B 4920/306 MR20 is a Polypropylene Homopolymer with 20% talcum that is highly processing stabilized, easy to release (demolding), and heat stabilized. It is used in the automotive market for transport systems, fixtures/fittings, housings, functional components, and fixing elements. Pre-Drying Conditions should be done in a dry air (desiccant) dryer between 80-120°C for 2-3 hours, or an air circulating dryer between 80-120°C for 2-4 hours. Processing Injection molding should be done with a melt temperature between 200-250°C and mold temperature between 20-70°C.

WIC PP 10 BK LE is a polypropylene-based filler with 10% carbon fiber and black color, designed for injection molding with a melt temperature of 210-260°C and a mold temperature of 30-60°C. It offers low emission, heat aging stabilization, and is suitable for use in the Automotive and Sport market segments. Under certain conditions, increased thermal conductivity should also be considered.

MOCOM Compounds ALTECH® PP-H FC 1000/578 is a Polypropylene Homopolymer with a hygienic material filler/additive system designed for Medical/Personal Care, packaging, and medical device applications. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. Typical applications include functional components. To ensure optimal performance, it is recommended to protect from light and store at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® NXT PP -H A 2040/456.02 GF40 CP is a polypropylene homopolymer pre-dried in an air circulating dryer and a dry air (dessiccant) dryer. It is composed of 40% glass fibers and is chemically coupled, high heat stabilized, high stiffness, high toughness, low emission, and heat stabilized. It is designed for injection molding and is often used in automotive applications and various injection molded parts. For optimal performance, it should be stored in a dry and protected environment, away from light, and not above 30°C.

MOCOM Compounds ALTECH® ECO PP-H 2030/W100.05 BK0002 is a polypropylene homopolymer with 30% glass fiber filled, black in color and pre-dried at 80-100°C in an air circulating dryer for 2-4 hours, depending on moisture content with a maximum moisture content of 0.10%. It is suitable for injection molding with a melt temperature of 200-270°C and mold temperature of 20-60°C, and is processing stabilized for Automotive and Various market segments. For optimal performance, it should be stored in a dry and light-protected area to maximize its effectiveness.

MOCOM Compounds ALTECH® PP-B B 4430/500 MR30 is a polypropylene copolymer suitable for injection molding. It includes a 30% mineral filler/additive system, providing easy release (demolding) and processing stability. This product is suitable for automotive, building and construction applications, such as housing and automotive trim unpainted, buffer, and functional components. For optimal performance, it should be stored in a dry and light-protected area at temperatures not exceeding 30°C.

WIC PP 15 BK LE is a high-performance, black-colored material specifically designed for use in the automotive and sports industries. Its base polymer is polypropylene, reinforced with 15% carbon fiber to provide excellent strength and stiffness. This material has low emissions and heat aging stabilization, making it ideal for use in demanding environments. It can withstand high temperatures and remain stable throughout the production process, making it a reliable choice for these industries.

WIC PP 30 BK IM1 is a black polypropylene compound with 30% carbon fiber filler. It is suitable for injection molding and must be dried at 80°C for 2-4 hours prior to processing to achieve a moisture content of 0.10% maximum. The recommended melt temperature range is between 210 and 260°C, with a mold temperature of 30 to 60°C. The material has been formulated with heat stabilization and impact modification, making it a suitable choice for use in automotive and sports applications. It is also resistant to wear and tear and has a good surface finish.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

WIC PP 30 BK LE is a black polypropylene material with 30% carbon fiber filler that is suitable for injection molding with a melt temperature range of 210–260 °C and a mold temperature range of 30–60 °C. Pre-drying is required at 80°C for 2-4 hours with a maximum moisture content of 0.10%. The material has low emission and heat-age stabilization properties and is suitable for use in the automotive and sports market segments.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALTECH® PP-H A 2030/159 GF30 CP is a Polypropylene Homopolymer reinforced with 30% glass fibers that have been chemically coupled and heat stabilized, resulting in excellent stiffness and toughness. This material is suitable for injection molded parts, with a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H A 2030/158 GF30 CP is a Polypropylene Homopolymer filled with 30% glass fibers which is chemically coupled, heat stabilized, processing stabilized, and easy release (demolding). It is suitable for building and construction, as well as automotive applications, and is typically used for housings, functional components, and injection molded parts. Pre-drying conditions include a dry air (dessiccant) dryer of 80-120°C for 2-3 hours, or an air circulating dryer of 80-120°C for 2-4 hours. For processing injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C is required.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.