CYCOLOY™ FR Resin CX7240

Identification & Functionality

Additives Included

Flame Retardant

Polymer Name

PC/ABS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free

Materials Features

Chemical Resistant,

Flame Retardant,

Good Flow,

High Flow,

High Flowability,

High Hydrolytic Stability,

Medium Flow,

Non-brominated,

Non-chlorinated,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma,

Industrial,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Aftermarket Parts & Components,

Automotive Lighting,

Exterior & Body,

Interior,

Powertrain & UTH

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures,

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Consumer Electronics,

Displays,

Lighting

Healthcare & Pharma — Medical

Disposable Nonwovens,

Medical Devices & Assemblies,

Surgical Instruments & Trays,

Tubing & Fluids Handling

Industrial — Military & Defense

Advanced Materials

Printing & Packaging — Packaging

Healthcare Packaging,

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Batteries,

Connectors,

Housings & Enclosures,

Switches & Relays

Consumer Goods — Sports & Recreation

Automotive & Transportation — Transportation

Aerospace & Aviation,

Off Road & Recreational Vehicle (RV),

Rail & Mass Transit

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Plastics & Elastomers End Uses

AC Charging Cabinet,

AR/VR Enclosure,

AR/VR Headsets,

AR/VR Housing,

Aerospace Applications,

Air Cabin Interior,

Air Conditioner,

Air Filtration,

Appliances,

Audio Equipment,

Automotive Applications,

Automotive Exterior Parts,

Automotive Under The Hood,

Batteries,

Battery Cell,

Battery Pack,

Building Materials,

Cables,

Camera Applications,

Cell Phones,

Circuit Protection,

Commercial Appliance,

Computer Components,

Construction Applications,

Consumer Applications,

Containers,

Covers,

Dishwasher,

Displays,

EV Charging System,

Electric Vehicles,

Electrical Components,

Electrical Housing,

Electrical/Electronic Applications,

Electronic Components,

Enclosure,

Energy Management,

Energy Storage,

Faucet System Components,

Fittings,

Fixture Bath/Shower,

Fluid Handling,

Gaming player,

Gears,

Head Phone Speaker Component,

Heavy Vehicles,

Home Appliances,

Housings,

Industrial Applications,

Interior Rail Components,

LED Lighting,

Lighting Applications,

Medical Device Housings,

Medical Devices,

Medical Reusable Masks ,

Medical/Healthcare Applications,

Military Applications,

Non-LED Lighting,

Personal Accessories,

Pharmaceutical Packaging,

Power Manangement,

Pump Parts,

Rail Seating,

Rail Window Glazing,

Rails,

Recreational Vehicle Components,

Reflectors,

Refrigerator,

Smart Card (ID Card),

Specialty Vehicles,

Sporting Goods,

Surgical Devices,

Tablets,

Toys,

Vacuum Cleaners,

Washing Machine,

Water Management,

Wearable Device,

White Goods & Small Appliances,

Wireless Communication,

Wires,

Wiring Devices

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 5VA,

UL 94 5VB,

UL 94 V0,

UL 94 V1,

UL 94 V2

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	65	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	58	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	4.1	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	100	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	2600	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	104	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2500	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	65	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	50	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	90	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2600	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	96	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2500	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.19	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ʰ ¹¹	0.4 - 0.6	%	SABIC method
Melt Flow Rate (at 260°C, 2.16 kgf) ¹¹	18	g/10 min	ASTM D1238
Density ¹¹	1.2	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.2	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.1	%	ISO 62
Melt Volume Rate (at 260°C, 2.16 kg) ¹¹	15	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	110	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	110	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	100	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	89	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	99	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000075	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000075	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000075	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000075	1/°C	ISO 11359-2
Thermal Conductivity ¹¹	0.2	W/m-°C	ISO 8302
Ball Pressure Test (at 73°C to 77°C) ¹¹	Pass	—	IEC 60695-10-2
Vicat Softening Temperature (Rate B/120) ¹¹	113	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	93	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	90	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	90	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	90	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	min. 1.E+15	Ω.cm	IEC 60093
Surface Resistivity (ROA) ¹¹	min. 1.E+15	Ω	IEC 60093
Dielectric Strength (in oil, at 0.8mm) ¹¹	35	kV/mm	IEC 60243-1
Dielectric Strength (in oil, at 1.6mm) ¹¹	25	kV/mm	IEC 60243-1
Dielectric Strength (in oil, at 3.2mm) ¹¹	17	kV/mm	IEC 60243-1
Comparative Tracking Index (UL, PLC) ¹¹	3	PLC Code	UL 746A
Hot Wire Ignition (PLC 1) ¹¹	min. 3	mm	UL 746A
Hot Wire Ignition (PLC 3) ¹¹	min. 0.75	mm	UL 746A
High Ampere Arc Ignition (PLC 0) ¹¹	min. 0.75	mm	UL 746A

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	700	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	175	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	65	J	ASTM D3763
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹	20	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*3, at -30°C) ¹¹	10	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	25	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	10	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	20	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	22	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	10	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	10	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80 - 90	°C	—
Drying Time ⁷	2 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	250 - 300	°C	—
Nozzle Temperature ⁷	250 - 300	°C	—
Front - Zone 3 Temperature ⁷	250 - 300	°C	—
Middle - Zone 2 Temperature ⁷	240 - 290	°C	—
Rear - Zone 1 Temperature ⁷	230 - 280	°C	—
Hopper Temperature ⁷	60 - 80	°C	—
Mold Temperature ⁷	60 - 85	°C	—
Vent Depth ⁷	0.03 - 0.075	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94-5VA Flame Class Rating) ᵖ	min. 3	mm	UL 94
UL Recognized (94-5VB Flame Class Rating) ᵖ	min. 1.5	mm	UL 94
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.75	mm	UL 94
UL Recognized (94V-1 Flame Class Rating) ᵖ	min. 0.6	mm	UL 94
UL Recognized (94V-2 Flame Class Rating) ᵖ	min. 0.4	mm	UL 94
Glow Wire Ignitability Temperature (at 3.0 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.0 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 0.75 mm) ᵖ	800	°C	IEC 60695-2-13
Glow Wire Flammability Index (at 3 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 2 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 0.75 mm) ᵖ	960	°C	IEC 60695-2-12
UV-light (Water exposure/immersion) ᵖ	F2	—	UL 746C
Glow Wire Flammability Index (passes at 960°C, by VDE) ᵖ	0.75	mm	IEC 60695-2-12
Glow Wire Ignitability Temperature (at 0.75 mm, by VDE) ᵖ	775	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm, by VDE) ᵖ	775	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 3.0 mm, by VDE) ᵖ	775	°C	IEC 60695-2-13
Oxygen Index (LOI) ᵖ	34	%	ISO 4589

Note

• ʰ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America