Products

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE BK 1175 is a blocked isocyanate suitable for the formulation of non-yellowing IK stoving enamels; it can be used in traditional stoving enamels to flexibilize and to increase adhesion.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,

POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.

POLURENE IR 51 AB is recommended for the formulation of PU sealers and matt topcoat.

POLURGREEN PRP 450 Olis a polyether based prepolymer with high elongation andgood modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 450 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

HYDRORENE AW 4 01 is a low Monomer Content solvent-free product.

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

POLURENE OK. D. AE is recommended for the formulation of overprinting coatings for paper and polishable varnishes and enamels with good color retention for wood, metal, plastic.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

POLURGREEN PRP 750 01 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 750 01 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE IR 51 EA is recommended for the formulation of hardener for 2K PU system.

POLURGREEN MT100 LLV-is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

BLUEPUR 3038 is a aliphatic-aromatic isocyanurate.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

UCOPOL M 4054 is an urethane prepolymer recommended for the maintenance of wood, for anti-skid floors, gymnasiums and for highly abrasion resistant coatings.

POLURENE LP100NPF is a yellow liquid. Compliance with EC and REACH.

UCOPOL M 541 is used for the formulation of one component and two component sealants and industrial adhesives. UCOPOL M 541 is recommended for the formulation of both sealants and coatings for concrete substrates.It can be mixed with UCOPOL M 551 in order to provide tough flexible sprayable films.

POLURENE IR 51 BA is recommended for the formulation of hardener for 2K PU sealers and matt topcoat. POLURENE IR 51 BA is used to formulate fast curing hardener. POLURENE IR 51 BA can be used in combination with POLURENE AD, for the formulation of sealers and matt topcoat, clear or pigmented, when fast curing and high scratch resistance are required.

POLURGREEN FP 75 01 is Low monomer version of POLURENE FP 75K. Polyurethane adduct version in accordance with EU, BFR and FDA regulations for food packaging.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

POLURENE LP 100 LV, with very low viscosity, is excellent for improving the flexibility of epoxy systems and for adhesives and sheaths. It is recommended for adhesion of wood with building materials (concrete, ceramic, stoneware, marble).

POLURENE M 75 BA is a aliphatic biuret with high flexibility, suitable for the formulation of no yellowing 2K PU coating and stoving enamel.

POLURCAST PE90A is a aromatic prepolymer.

UCOPOL W 708 is recommended for the formulation of moisture curing polyurethane coatings for wood, parquet, impregnating resins for brick walls, concrete and flooring.

POLURCAST PE95A01 is a aromatic prepolymer.

Properties of POLURENE MD 1600 are the excellent elasticity and the good reactivity. POLURENE MD 1600 is recommended for the formulation of two components polyurethane solvent-free coatings, like: self-levellings, sealants and two components adhesives or primers. The properties of hardness and elasticity of the coatings depend on type of polyol used.

UCOPOL M 602 is a polyurethane primer to be used as highly reactive impregnating and dust binder for absorbent concrete substrates.

POLURENE XP 4041 is a HDI Derivative product.

UCOPOL M 2851 is recommended for Adhesion, coating for parquet, metal and plastic.

POLURCAST 620 is a aromatic prepolymer.

Prepolymer used to formulate 1K and 2K sealants and industrial adhesives. It can be mixed with UCOPOL M 551, more flexible, to adjust final properties and/or drying time.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

Polyurethane adduct for general purposes. Suitable for 2K varnishes and enamels. POLURGREEN AD-01 is recommended for the formulation of two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper, hardeners for shoe market adhesive and inks.