Products

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crestamould® B12R Sealer is a MEKP catalysed, brushable, slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. It acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work.

Crystic® Polyester Resin 1160PA is a general-purpose, thixotropic, pre-accelerated, very low styrene emission, orthophthalic polyester resin with low viscosity. It has a 25-minute gel time and is suitable for parts used in building and construction, transportation, and industrial applications. This product is a part of Scott Bader's Crystic® Green system.

Crystic® Vinyl Ester Resin VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester laminating and tooling resin with excellent surface finish for marine skin coat as well as for tooling applications. It has a gel time of 23 minutes.

Crestamould® T28 is an extrudable modified polyester compound designed for milling of small and large plugs or direct limited production molds with Computer Numerical Control (CNC) multiple axis machines. It can be extruded with conventional FRP putty dispensing equipment. The product provides a homogeneous substrate that prevents print from the underlying structure and gives sufficient flexibility to prevent cracks.

Crestamould® Gelcoat 15PA (B) is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and has been developed to have excellent gloss retention alongside impact, heat and chemical resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. Crestamould® Gelcoat 15PA (B) is recommended for use in the manufacture of high quality FRP composite tooling.

Crystic® Glosscoat is a polyester coating designed to be applied over prepared crystic primecoat to give a glossier and more durable surface. The material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss. It is designed for spray application using gravity fed, siphon or pressure pot systems.

Crystic® Polyester Resin 2.446PA is a pre-accelerated, thixotropic, spray viscosity, orthophthalic polyester resin with low styrene emission. This laminating resin's rapid wet-out, low exotherm, and fast hardening characteristics make it ideal for rapid mold turnaround. It has a 26-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications. A low-viscosity version of this product is also available.

Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.

Crestamould® T29 Extrudable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and it can be extruded up to a thickness of approx. 15mm (0.6”). It provides a homogenous substrate that prevents print from the underlying structure.

Crestamould® T27 Polyester Compound is designed for milling of large plugs (10-25 m, 30-75 ft, ) or direct limited production moulds with Computer Numerical Control (CNC) multiple axis machines. It provides a homogeneous substrate that prevents print from the underlying structure, and gives sufficient flexibility to prevent cracks.

Crystic® Gelcoat 15E(B) is a superior-performance, unaccelerated vinyl ester spray or brush-tool gel coat. It is used for making molds that are designed to have a long service life and retain high gloss levels after multiple pulls. This product is easy to spray or brush and achieves good coverage. The gelcoat does not gas, resulting in a very low porosity surface. It cures with a standard MEKP catalyst and has excellent resistance to fiber print-through when used with Crestamould® VE679PA skincoat, Crestamould® RTR4010PA, or Crestamould® 474PA.

Crestamould® RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity, improved shrinkage control and is catalysed with standard MEKP catalyst. It is a thixotropic, filled, low profile resin which helps to achieve faster mold making and eliminates surface distortion. This product was formulated for hand-lay mold making applications.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crestamould® VE 690PA is a pre-accelerated, thixotropic, modified vinyl ester resin. This product is developed for use as a skin coat in tooling and marine applications. It has excellent blister resistance, and it significantly reduces the occurrence of print-through to produce durable moldings with an enhanced surface finish.

Crystic® Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc. It can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications.

Crestamould® Gelcoat 11PAS is an iso-NPG polyester gelcoat, thixotropic and pre-accelerated, specially designed to be spray applied. Crestamould® Gelcoat 11PAS has been specially formulated for mold making. It is pre-accelerated and only requires the addition of the catalyst to start its curing reaction.

Crestamould® VE 679PA is a pre-accelerated, thixotropic, DCPD-modified vinyl ester resin. This product has been developed for use as a skin coat in marine and tooling applications. It has excellent blister resistance, reduced print through, a 23-minute gel time, and Lloyd's approval.

Crestamould® T29 Sprayable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and can be sprayed with few passes up to a thickness of approx. 1-3mm (0.04 - 0.12”). It provides a homogenous substrate that prevents print from the underlying structure.

espol™ 38.05 is a non-accelerated, non-thixotropic vinyl ester resin that rapidly wets out reinforcements. It exhibits excellent resistance to a wide range of corrosive chemical environments at room and elevated temperatures. It is specifically designed for pultrusion applications. Due to its high elongation and flexibility, espol™ 38.05 can also be used in tooling and mold making.

Crystic® Gelcoat 12PA is a pre-accelerated iso-NPG gel coat formulated for brush application. It has good heat and chemical resistance, making it suitable for preparing molds. This product is recommended for use in the production of sanitaryware and tooling products.

Crestamould® Gelcoat 15PA (S) is a pre-accelerated spray gelcoat specially formulated from a vinyl ester base resin and has been developed to have excellent gloss retention alongside impact, heat and chemical resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. Crestamould® Gelcoat 15PA (S) is recommended for use in the manufacture of high quality FRP composite tooling.

Crystic® Polyester Resin 2.420PA is a long gel time, low styrene emission, pre-accelerated orthophthalic polyester resin. This laminating resin has a 45-minute gel time and low exotherm, making it suitable for the molding of large structures and thick laminates. Crystic® Polyester Resin 2.402PALV is the low-viscosity version of this product. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications.

Crystic® Laminating Resin 1122PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give sufficient pot life for contact molding using Andonox® KP9 catalyst at normal ambient temperatures. It is suitable for a wide range of applications. This product has been specially formulated to give rapid wetting and impregnation of reinforcements and to aid in the elimination of air. It is almost colorless when cured.

Crestafix® F26R Polyester Compound is a water-resistant, low-density, polyester-based fairing compound. This product has good adhesion to cured fiber-reinforced polyester and vinyl ester laminates. It sands easily and gives a hard finish after a full cure, yet is not brittle and has good impact strength.

Crystic® Transfer Moulding Resin 783PA is a pre-accelerated, isophthalic polyester resin, designed for use in RTM (Resin Transfer Molding). It is a versatile resin, with good mechanical properties and impact resistance, recommended for the manufacture of mouldings for use in structural, high performance applications.

Crystic® Laminating Resin 406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a gel time of 18 minutes and Lloyd's approval. This product is suitable for use in marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 2.406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin with low styrene emission. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a 16-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 1381PA is a low-viscosity isophthalic polyester resin into which water can be incorporated to form an emulsion. It is suitable for general casting work or intricately detailed moldings such as decorative articles and statuettes. The castings can be nailed, screwed, sawn, or machined without splitting.

Crestaform® Tough 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It can be used in most stereolithography 3D printers and cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestaform® Rapid 2.0 3D printing resin is an upgraded general-purpose resin formulation that offers a lightning-fast print speed, high print quality, enhanced color, robust mechanical performance, and increased usability. It is specifically designed for creating high-resolution models, figurines, rapid prototyping, and jewelry.

Crestaform® Rapid 8K 3D printing resin is specifically optimized for high reactivity and positive feature build-up. It minimizes the depth of cure, enabling the full potential of next-generation 8K LCD and DLP 3D printers to be unlocked. With this resin, intricate details can be created with precision.

Crestaform® Open 3D printing resin is a versatile 3D printing resin designed for rapid prototyping and the creation of high-resolution models. It offers a fast and efficient method of fabrication. Compatible with various types of resin 3D printers, such as LCD, SLA, and DLP machines, it is suitable for use with popular brands including Formlabs, Asiga, Anycubic, and Elegoo.

Crestaform® Rapid 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It can be used in most stereolithography 3D printers and cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestaform® Durable 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It is compatible with most stereolithography 3D printers and is cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestamould® B21 Sealer is a brushable sealing laminating resin for polystyrene foam surfaces. When used with a chopped-strand mat, this sealer provides a styrene-resistant barrier between the polystyrene plug and styrenated tooling pastes. It has good adhesion to tooling pastes like Crestamould® T29. Crestamould® B21 sealer has a low styrene content, significantly reducing polystyrene surface erosion compared to traditional styrene-containing resins. The sealer can be used to laminate CSM to create a more structurally stable foundation for mold production.