Products

HARD CAP™ 100 spray-applied, plural-component, 100% pure polyurea is an ideal choice when a durable high buildcoating for interior and exterior applications with excellent color stability and gloss retention is required. HARD CAP™100 provides a flexible, resilient, tough, monolithic membrane with good water and chemical resistance.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

EPL™ 4 is a slow set, self-leveling 100% pure polyurea elastomer.

EPL™ 1.5 is a high-strength, self-leveling, semi-rigid polyurea elastomer. Due to its high tensile strength, tear strength,and tensile modulus, EPLTM 1.5 is very resistant to deformation with over 400% elongation. This optimal balance ofphysical properties makes EPLTM 1.5 an ideal choice of polymers for filling or repairing construction joints, randomcracks, joint faces, and spalls. EPL-1.5TM is formulated to be processed through a SPI Synergy Series proportioner suchas the LPGTM or TI-13DTM.

AQUASEAL™ is a state-of-the-art, high performance, spray applied plural-component 100% pure polyurea elastomer.This system is based on amine-terminated polyether resins, amine chain extenders, and MDI prepolymers. It providesa flexible, resilient, tough, monolithic membrane with water and chemical resistance.

ELASTAFLEX™ 1.0 is a economical blend of aliphatic and aromatic polymer chemistry with greater color/glossretention and more UV resistance than aromatic polyureas*. ELASTAFLEXTM 1.0 is formulated to be processedthrough a SPI Synergy proportioner such as the LPGTM.

AQUASEAL™ HI RISE X3 is a unique elastomer that expands approximately 300% of its original volume duringthe spray application. In place yield is ±50 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOADTMgun. As X3 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X3 is formulated with the “ULTRABONDTM” molecule therefore is self-priming in most instances.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

POLYSHIELD HT™ SLOW FC is a state-of-the-art, high- performance, sprayed, plural-component, pure polyurea elastomer,that is compliant with FDA 21 CFR 175 300 (c)/ (d) high temperature, heat-sterilized, non-acid aqueous food contact.This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides aflexible, tough, resilient monolithic membrane with water and chemical resistance.

AQUASEAL™ HI RISE X5 (X5) is a unique elastomer that expands approximately 500% of its original volume duringthe spray application. In place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™gun. As X5 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X5 is formulated with the “ULTRABOND™” molecule therefore is self-priming in most instances.

AMP™ 100 spray-applied, plural-component 100% pure polyurea is a unique synergy of aliphatic and aromatic polymer chemistry. AMP™ 100 pure polyurea is formulated using amine terminated polyether resins, amine chain extenders, and aliphatic and aromatic prepolymers. For many applications this highly cross-linked elastomer offers an economical alternative to pure aliphatic protective coatings. AMP™ 100 can be used as a stand-alone product or as a topcoat over aromatic polyureas, polyurethanes, or hybrids.

FULL METAL JACKET™ PLUS is an economical, state-of-the-art, spray applied 100% pure polyurea thermosetelastomer. It is designed for spray in bed liners and other similar applications, where a seamless flexible system isessential. It is fast-set, rapid curing, flexible, and can be sprayed to any desired thickness. FULL METAL JACKET™PLUS provides a resilient, tough, abrasion resistant monolithic membrane. It is excellent for pick up truck bed liners,undercarriage coatings, and other vehicle protection.

POLYSHIELD HT™ SL is a fast-set, high-performance, spray-applied, plural-component, pure polyurea elastomer. Thissystem is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides a flexible,tough, resilient monolithic membrane with good water and chemical resistance.

ELASTAFLEX™ HP is a unique blend of aliphatic and aromatic polymer chemistry with greater color/gloss retentionand is more UV resistant than aromatic polyureas*. ELASTAFLEX™ HP is a very economical 100% pure polyurea whichexhibits very high tensile strength and elongation. ELASTAFLEX™ HP was stretched to twice the samples originallength at 30 times per minute, more than 530,000 times before breaking.

K5™ is an ultra high-strength, high-elongation 100% pure polyurea, originally developed as a resilient blast resistantpolymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion, compared to other spray appliedcoatings. K5™ can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectivelyapplied to high wear areas.

SPI’s patented PTU™ 100% pure polyurea is a new generation of high-performance polyurea coating and is the resultof six years of development and field testing. This chemical resistant coating provides high-ductility, allowing itto move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application andreturned to service in a matter of hours.

ELASTAFLEX™ CR is specifically created as a secondary containment liner for hydrocarbons including crude oil,diesel fuel, gasoline, and alcohols. This very economical polyurea exhibits very high tensile strength and elongation.ELASTAFLEX™ CR is a unique blend of aliphatic and aromatic polymer chemistry with greater color/gloss retentionand is more UV resistant than aromatic polyureas. Unlike most spray-applied polyureas, ELASTAFLEX™ CR isavailable with SPI’s cutting-edge ULTRA BONDTM technology. SPI’s advanced ULTRA BONDTM chemistry is coined “theduct tape molecule”. ULTRA BONDTM has the unique advantage of adhering to most properly prepared organic andinorganic (new and aged) surfaces without requiring a primer. Like duct tape, ELASTAFLEX™ CR with ULTRA BONDTMgains adhesion over time.