Products

VINNAPAS® EP 645 is a specially modified vinyl acetate-ethylene (VAE) copolymer dispersion designed to provide excellent adhesion to a wide range of difficult-to-bond substrates. The dispersion is stabilized with polyvinyl alcohol to ensure good wet tack, fast setting speed, and excellent machinability.

ELASTOSIL® LR 3023/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. Vulcanizates are opaque with average mechanical properties, and they are noted for ultra-low compression sets after post-curing.

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

ELASTOSIL® LR 3040/50 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

VINNAPAS® EN 1267 is an aqueous, self-crosslinking copolymer dispersion based on vinyl acetate and ethylene. It is surfactant-stabilized and intentionally formulated without the use of APEO materials. This dispersion is specifically designed to serve as a soft binder for nonwoven applications that require excellent wet tensile strength performance.

VINNAPAS® 192 (CTY) is a self-crosslinking, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the nonwovens market. The dispersion is produced without the use of plasticizers. VINNAPAS® 192 (CTY) offers a unique balance of high dry and wet strength, excellent absorbent properties, and a good handfeel.

SILFOAM® SD 986 is an antifoam solution with a low viscosity that incorporates a small amount of highly viscous silicone fluid. The presence of dimethylpolysiloxane in SILFOAM® SD 986 provides effective defoaming properties in various mineral oil products and non-aqueous systems. This is attributed to its low surface tension and excellent spreading ability, enabling efficient foam control.

ELASTOSIL® LR 3003/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® L 053 is a polyether-functional polydimethylsiloxane that is completely water-soluble. WACKER® L 053 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 053 exhibits both special lubricant properties and antistatic action.

WACKER® Anchorage Additive HF 100 is a reactive epoxy-functional silicone polymer that enhances the adhesion of addition-crosslinking DEHESIVE® systems or liquid silicone rubbers (LSR) to polymeric substrates. It improves the anchorage of DEHESIVE® systems on PET films, enabling the production of release liners, as well as the anchorage of LSR on fabric. This additive has a low odor and is non-corrosive.

WACKER® Elastomer 50 N is a colorless liquid polymer composed of hydroxy-functional polydimethyl siloxane. It has been specifically formulated to cater to various applications such as sealants, adhesives, coatings, textile softeners, and mold-making products. Notably, this product does not dissolve in water.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

VINNAPAS® EP 1133 is a carboxylated, higher-solids vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of 0°C. This product is a moderately soft binder that provides excellent adhesion to various fiber substrates, making it suitable for a wide range of nonwoven applications. Additionally, it has the ability to be crosslinked for enhanced performance.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

VINNAPAS® EZ 123 is an aqueous polymer dispersion of vinyl acetate and ethylene specifically designed for applications in the nonwovens market. It is produced without the use of plasticizers or APEO surfactants. This dispersion possesses a nonionic character and provides high dry tensile strength, resulting in a fuller and stiffer hand feel to nonwoven webs. It can be formulated with various chemistries, including cationic, anionic, or nonionic, to create specialized nonwovens. Additionally, VINNAPAS® EZ 123 is a low-odor dispersion with formaldehyde levels of less than 50 ppm.

ELASTOSIL® LR 6240 A/B is a solvent-free, free-flowing, addition-curing two-component silicone rubber for textile coatings (e.g. electrical sleevings). This low-viscosity compound is used to produce flexible textile coatings. It is especially suitable for the manufacture of conveyor belts and electrical insulation tubing.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

WACKER® E60 350 is a 60% emulsion of medium-viscosity polydimethylsiloxane using a nonionic surfactant system. It has been designed for use in many applications, including automotive care, polishes, industrial release, and textile lubricants. It has been designed to be used in many applications, such as mold release, textile lubricants and softeners, automotive care, and other specialty product applications.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® RD 6600 F is a solvent-based, addition-curing silicone rubber dispersion specifically designed for textile coatings. It finds applications in architectural textiles, industrial textiles, lifestyle textiles, and textiles for protective clothing. This silicone rubber dispersion, which is formulated in xylene, exhibits excellent penetration into the substrate and provides a dry surface touch. It is commonly used for producing textile coatings in various applications such as conveyor belts and electrical sleevings.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

WACKER® Polymer FD 6 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product is specifically designed for use in sealants and silicone sealants, serving as a special raw material for silicone compounding.

WACKER® Adhesion Promoter HF 86 is a solvent-free adhesion promoter specifically designed for enhancing the adhesion of addition-cured liquid silicone rubbers to textiles. It provides improved bonding between silicone rubbers and textiles, making it ideal for textile coatings. Additionally, it can be used as a textile primer in aqueous solutions. Notably, WACKER® Adhesion Promoter HF 86 is completely solvent-free.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

DEHESIVE® 915 is a solvent-free, addition-curing silicone fluid specifically developed to provide paper and filmic substrates with a release layer. Formulated with additional components, this versatile product offers exceptionally fast curing properties, enabling the use of formulations with low platinum concentrations.

ELASTOSIL® RT 779 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with curing agent WACKER® Catalyst T 79, it forms a self-bonding and durable silicone rubber with outstanding oil resistance. Cured ELASTOSIL® RT 779 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously be exposed to constantly changing climatic conditions, UV radiation, motor oil, and temperatures as high as 180°C (356°F) without damage.

WACKER® Crosslinker V 72 US is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. This product is specifically designed for addition-curing coating applications in the production of release, baking, and hygiene papers. It offers extremely fast curing, significantly low platinum consumption, and facilitates easy mixing and metering.

VINNAPAS® CEF 52 is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer. It can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. The special composition and manufacturing technology mean that VINNAPAS® CEF 52 can be used to formulate very hydrophobic products.

WACKER® AK 35 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its chemical structure imparts exceptional properties to WACKER® AK 35, distinguishing it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and demonstrates minimal changes in physical properties across a broad temperature range. These characteristics make it highly versatile and suitable for various applications that require these specific properties.

ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.

ELASTOSIL® LR 3003/20 TR A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.